Crushing Candles with 3D Printed Steel Press Tool
HTML-код
- Опубликовано: 11 сен 2024
- Turning candles and other stuff into worms with our new 3d-printed steel tool!
Our second channel / @beyondthepress
Our fan shop www.printmotor...
/ officialhpc / hydraulicpresschannel
Do not try this at home!! or at any where else!!
Music Thor's Hammer-Ethan Meixell
We are on summer vacation so we are not very active on comments during the August. But if you want to see how our vacation is going on check out some of our summer streams from www.twitch.tv/hydraulicpresschannel or some Anni's summer videos on her RUclips channel ruclips.net/channel/UCC5vubsnFBpy-lFB8S8rZEg
Hard turn an o ring drive around the periphery and use an o ring to stop the blow-by.
very niiiiiiiiice video 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
In the event you need another worm-maker (or other large-ish complex metal item) you could attempt a lost-plastic cast. The printed plastic (might have to explore good polymers) geometry gets burned out of the mold prior to pouring molten metal.
Have a good vacation and take a break from squeezing things xD
You should gett some big magnets and try to press together!! :D
I love that you lit the candles before squishing them.
yeah it'd be a waste if they didn't
2:45 »They like… They don't stay like hard. They curve down. That's not gud!«
Never change, Lauri, never change!
That's what she said. From her experience.
They are masters at making dirty jokes without being to forward about it.
* They like... They don’t stay... like hard. They like... curve down. That’s not gud!
IM TRYING TO MAKE MY MIND FORGET ABOUT THESE THINGS THIS NOT HELPING
@Miss Jae You must be new here…
I tell my friends my favorite RUclips channel is one that shows adults playing with Play-Doh. They're not surprised.
Richard Todd lol
Whattttt FBI OPEN UP!
That’s a pretty common thing on RUclips lol
Play-Doh is made for all ages 🙄
Youu've created a tentacle summoning machine!
Hentai maker
Japan has entered the chat
To make them come alive just have school girl in the room next press
@@bingus6195 NANI?
It's either a certain old god, or the flying spaghetti god. Your choice.
Actually, I'd love to see more paper-thin extrusions like the "leaking" wax.
Yes!!! And I want to see them burn please
Loose Tolerance Extruder Five Million
"How to make play-doh snakes in 1 ease step!" All you need is a hydraulic press, a custom 3d printed head, and a lot of play-doh.
The leaking part is pretty cool. Make a tool that does that- Ribbon maker 5,000,000!
"they dont stay hard and curve, that's not good" 😂😂😂 love you guys always put a smile on my face.
2:40 "It's going to be really hard if we go all the way" ... You do these on purpose, don't you?
That's what she said...
...
Party snakes. They're party snakes!! This is super satisfying to watch I like this new press head.
Steel vs Wax. Who will win?!? WE WIN BECAUSE WE ARE WATCHING
I actually laughed out loud at the little guy at the end, continuing to peek out even as he was getting crushed! :-D
I quite like the white paper thin wax that popped out.
I've been watching your channels for at least 4 years now. I have loved watching the channels grow and evolve, while still being classic Lauri and Anni. You've always shown the right amount of footage to show all the steps without it getting boring. Keep up the great work!
I wasn't expecting Mario doing spaghetti by using hydraulic press
You should try different shaped holes, like triangles, stars or even thin lines and create "walls" of candle stick or play dough.
Lauris laugh gets me EVERY time. Lol that last batch was by far the funniest and best overall but I enjoyed all lf them. Even the silly play doh stuff lol
Other channels: "I've 3d printed a fun little knic-knack out of plastic!"
HPC: "We've 3D Printed Steel."
Everyone: "I'm sorry, what?"
That was pretty cool I liked how they moved around when they came out. That paper thin piece of wax was kind of cool even though that wasn't what you were going for. Thanks for sharing Lauri and Anni
The highest developed tool, Worm maker! Slicer 15 million would also be good!
Almost as fun watching the YT video as it was watching the live Twitch stream of making the video. 😁👍
Such infectious laughter. 😂😂😂
Thumbs up for you guys not only for enjoyable videos but also for all the cleaning you have to do between recording new experiments 👍👍👍
3D printed, out of steel?
Didn’t know that was a thing, sounds awesome though!
There are a number of additive manufacturing processes, but this concept works the same way as with printed PLA. Just with a much hotter tip.
It's called sintering I believe.
@@TWX1138 Sintering is a different process than I was thinking of, but that can be done too. You can cast sintered parts in a mold, or use a laser to fuse the powder into the product, layer by layer, in what is called "powder bed fusion." I was thinking of metal extrusion
@@BlackEpyon There's also Laser Powder Deposition, which shoots a tiny stream of powder into the path of the laser and builds up from there rather than using a powder bed. It can do a lot more than printing, too, and can use a wide range of alloys and ceramics, which is awesome, lol
I read an article about building structures on other planets/moons and how it would be really expensive to send prefabricated building materials to be assembled planet side and that only so much could be sent in one trip. The idea that scientists were considering would be to send basically a 3D printer that would be attached to some scaffolding. Robots would dig a hole, that would be the foundation, into the planet/moon and would fill the 3D printer with the material it dug up. The 3D printer would melt the material into magma and use it to build a kind of glassy/cement igloo that would be the main structure that prefab parts would be assembled on. The idea is that I would save a lot of money by not needing to send walls everything the a structure needs to be built and that the robots could be automated to keep building the shells of structures even when nobody is on the base.
I read that article a while ago so I don't know if it's still an idea they're still considering or if it's been scrapped.
Bravo! Taking crushing to a whole new level! Never stop finding new entertaining ways to destroy stuff.
Aside from the juicy one, these were actually rather pretty! To whoever made that 3D design, market that thing!
I'm not sure if I'm more impressed by the manufacturing or the artistic merit!
HPC “Thank you got watching”
Myself “Thank you for presenting!”
I have loved this channel ever since the first book explosion.
All the very best to you guys!
5:36 A RUclips first-
'Candle-Snake Fart!'🤣
It left what looked like a brown stain on the camera screen, so...
"Candle snake not-just-a-fart!"
Hahaha 😆
5:57 the toilet after a meal of taco bell
Chipotle-a-way
I like how the gnome lost its hat before getting crushed.
Anyone else notice @5:05 the green candle peaks out with a smirk?
😅😂🤣
I love watching these videos its satisfying 😂
Yeah, that was fun. Great idea. Thanx for the Saturday morning smile.
I'm here from Good Mythical Morning! It was lots of fun to watch things unsquoosh.
This was a fun video, too. I love the spaghetti candles!
I also watched you squoosh the metal cylinders. I hope you can raise the money to get your window replaced! 😂
More speed, more pressure, lol...that was awesome!
Two Ideas: put a clear plastic cylinder around the apparatus to keep the worms from bending over. Or keep the tool underneath the candles with some room below for the worms to hang down.
I've seen enough hentai to know where this is going
True pioneers in 21'st century hydrophilic pressing! World leading hydrophilic worm pressing.
Every time I watch your videos I’m reminded why I love this channel
After all these years, you two still make me smile. Like, the utter frivolity of this all just fills me with joy. 😀
Absolutely incredible thank you Hydraulic Press Channel, I find that 3D printed steel elegant as an engineering marvel!
I'd like to see just the leaking parts, that was pretty cool.
Love this channel! I'd like to see a version of this with smaller holes and using pasta dough: Spaghetti Maker 5000000.
5:10 that pink spiarly one which flies out is the best
You guys put out great videos and I really enjoy watching them.
Idea for something to crush:
Roofing tar/asphalt for hot tar roofing. It comes in blocks that are hard as rock room temperature, shatters into a thousand shards when cold but leave it in the sun for awhile and it starts to droop and flow. Might be interesting.
Have a fantastically wonderful vacation and cheers from Canada! 🍻
your voice is more satisfying than hydraulic press.
3:27 octopus without eyes
that steel press tool is an optical illusion in itself (00:37). Also, anyone else thinking of the Alien movie with the candles coming out of holes?
With this tool you should have clear cylinder(plexi-glass) around the tool to allow the worms to climb and not spread out.
You should fit a proportional valve to your cylinder and use ramps to oscillate the pressure that may make the 'worms' wrap around the rod.
May I suggest on the bottom of each tube, round the edge off. This will allow smoother extrusion, less tears, and more noodle in one piece.
Here from good mythical morning. I love the look of the candles. Sooo cool
"Now we have to deal with it" is your next
t-shirt slogan.
Interesting video of how the shape and arrangement of the tubes influences the result. In another video he tries a hydraulic press tool that has curved or differently shaped tubes to see if curled wax strips or other shaped strips will form.
Amazing experiment 👍.
I wasn't expecting Mario doing spaghetti by using hydraulic press
Thanks for all these amazing videos! I want to see how much force a digital Casio G-shock watch can withstand. :D
Hopefully you do this in the future.
The candles remind me of the dog in The Thing.
When Lauri gave "95% chance" of the plastic tool and play-doh working, and then the tool fell apart, I thought in my head "Wife win, and husband lose."
Cool press tool!
2:37 it looks like snakes coming out of somethings
Are you finnish?
@@jussironkainen yes
This gives an "alien" feeling watching this.
why does this reminds me of japanese cartoons? cthulu would be proud :)
Never realised candles can be something to play with 🤣🤣
I never realized Huudraulic Presses were something to play with, but then I found this channel! Live changing. :-)
Hope you guys are enjoying your holidays
U can try putting a policarbonate pipe around the press rod, so that the wax stripes cant fall down outwards and they will be forced to make a spiral upwards!
Thanks for ur videos!
4:29 when someone mows the lawn outside.
Most people know of gummy worms but waxy worms this looked awesome. I loved it. Now make new candles from the wax the wife may love it.
This was very satisfying to watch
When you get Rick rolled from someone making chapter 5 jokes:
This was GREAT - Thanks for this new innovation...
Poor little gnome. The death penalty because he may steal some strawberries. You are harsh people.
You guys should do different shaped nozzles and do this again. 4:39 Kinda like this shape. It looks pretty cool.
This might be my favorite hydraulic press video to date!!!
Here's an idea for something could just be machined. Same as the old press head with holes, but just drill the holes at an angle facing outwards from the center. Would make a beautiful spray of cooked macaroni or warm crayons.
If you want a perfect fit: Print it oversize, turn it down both inside and outside diameter and polish the ports that the was has to go through :)
Oh dang. I didn't even know that you *could* 3D-print with steel! Super interesting.
you can reinforce the 3d print with a steel plate and drill holes to match, then you can press harder on it
Mom: hey hun weres my candles
Dad:uhh idk
I think it needed a more open area on the bottom around the holes, so the material gets forced into the space easier.
See what the effect is of burning the candle for various periods of time. Maybe, if you had a FLIR camera or something, you'd be able to see the change in temperature but you could at least record how long you had the candle burning and it could be reasonably assumed that burning it longer would result in a higher net temperature within the entire candle, albeit hotter at the top near the flame obviously.
So many possibilities for tools :) maybe force things through a spiral to make screws
i was taking a particularly difficult poop while watching this, turtlenecking until the real extrusion started.
definitely helped.
thankew.
Wtf
5:35 Welcome to the hydraulic b*kake channel!
I was going to suggest melting some wax in... then you did (needs longer than you'd think to solidify). Also, if you were to melt a load of wax into the bottom section, when it cools, it will probably dip in the centre - as an FYI.
That Play Doh looks like an alien being.
1:02
“And because it was really expensive”
**looks at tiny thing**
Me: “How the hell is that small thing expensive”
If you pressed milled wheat & water, you'd make Spaghetti Pasta! Yummy!
And what i love about this channel is the accent...
I see, so you press worms out of normal items. Good channel.
I love how much joy this brings them
What about building some kind of support for the wax as it's coming out of the press? Then you could have another large O-shaped support above that, repeat x4. Then your wax won't fall over as it's coming out, and will actually climb the press :D
I think it might work better if you cast the wax instead of using commercial candles. You might also want to look into using beeswax, and see if you can find a harder wax to stiffen the extrusions.
This is the coolest thing I have ever seen!!
Why do i find these kind of videos fascinating? :D
the crushing starts at 1:31
This was similar to what I envisaged, and suggested, a while ago but probably got lost in the sea of comments.
My tool idea would've been able to have been machined as the slightly angled outward 'fountain holes' were flush, straight and drilled at an angle. This looks interesting tho!
I laughed at 30% infil.... CRUNCH!!
Thank you for making these videos!! I laughed until my stomach hurt! I always look forward to your video's.
Isn't it lovely how gravity, velocity and structural instability mess with the best laid plans. :D
4:20 I think the wax coming out the sides is 10x more satisfying
Got to agree