points Civil Engineer Must Know|Importrant interview questions for civil engineers|civil knowledge

Title: important points that every Civil engineer Must Know,Important questions/answers for civil engineers,Basic Knowledge for every civil engineer.
important points for civil engineers, 101 important questions for civil engineers 101 basic points for civil engineers
👉*at 08:57 the formula for steel weight calculation is D^2/162.162 kg /m
& D^2 /533 kg /ft.
#civilengineering #civilinterviewquestions #civilknowledge
__________________________/Your Queries:\____________________
what are important points for civil engineers?
What are the questions which every engineer must know?
What is the basic knowledge questions for civil engineers?
Important questions for interviews?
every civil engineer must know,civil engineers must know,important points for civil engineers,civil engineering,civil engineer,civil engineering videos,civil engineers,civil engineer must know,civil site engineers must know,basic knowledge for civil engineers,basic knowledge every civil engineer must know,civil engineering basic knowledge,site engineer must know,basic information for civil engineers,basic knowledge for civil engineer
__________________________/MUst Watch:\____________________
Types of Cracks in Concrete|causes of cracks in Concrete?|Common types of cracks in concrete
• Types of Cracks in Con...
How to read levelling Staff Rod?|How to take reading using Autolevel?|Reading staff rod in levelling
• How to read levelling ...
Important interview questions for civil engineers|Basic knowledge that civil engineer must Know P1
• Important interview qu...
Important interview questions for civil engineers|Basic knowledge that civil engineer must Know P 2
• Important interview qu...
Important interview questions for civil engineers|Basic knowledge that civil engineer must Know P3
• Important interview qu...
basic knowledge for civil engineers|important questions that civil engineers must know P4
• basic knowledge for ci...
basic knowledge for civil engineers|important interview question for civil engineers|Basic knowledge P5
• basic knowledge for ci...

[@MustafaKhan-t7z]

Very good information

[@princekhan4402]

Nice video❤

[@CET360]

👉*Everyone pls make correction at 08:57 the formula is D^2/162.162 kg /m
& D^2 /533 kg /ft.

[@santprakashsingh8960]

Yes u r right

[@makrandbhalekar8435]

Yes

[@ddeepakviswakarma92]

Yes

[@rijovarughese7562]

❤️👍

[@tanhamurghban]

@@AlSufyan225 in bottom fibers at mid section bending is maximum so lapping can not be provided in mid span in bottom steel bars

[@himanshusingh6112]

Good

[@CET360]

Keep watching

[@muhammadhaseeb4714]

❤❤❤❤❤

[@CET360]

Thanks dear

[@shivsagarsonar0]

Very good information

[@CET360]

Thanks dear

[@safwanaqeel5356]

very good and informative video

[@CET360]

Thanks dear.
Like and share

[@gangabhavanitaninki-mu5db]

Thanku sir super explation with figures

[@CET360]

Thanks keep watching

[@manojsaini4893]

Bhut nice vedio sach me

[@CET360]

Thanks ,keep visiting
Like and share

[@AkhtarP3115]

Very very informative, really very good effort for freshers and less experience holders,,,,❤

[@CET360]

Thanks for your appreciation, dear

[@DRAGONGAMING-xx1vm]

Very nice video ❤

[@CET360]

Thanks, keep watching more videos

[@arunavabanerjee1871]

Good informative video

[@CET360]

Thanks dear.
Like and share with beloved ones too

[@jayrajyaguru9327]

Thank you sir for this knowledgeable video.

[@CET360]

Thanks dear,

[@swathigowda7868]

Nice information thank you so much

[@CET360]

Thanks,like and share

[@DevSingh-rn6ie]

Hiii ma'am

[@kashifgujjar6844]

very informative

[@CET360]

Thanks bro.
Keep watching.there is more to come.

[@srinivasu4418]

Thanks for the vedio

[@CET360]

you welcome.
Thanks for watching

[@mitenbouri5051]

Column minimum 0.8%
Maximum 4% for lapping
8% for without lapping

[@bishnuPrasad9]

Good

[@CET360]

Thanks

[@Newz_Sove]

Alhamdulillah bhaijaan

[@CET360]

Thanks bhaijan

[@jitenderyadav9403]

Thanks you very much sir

[@CET360]

Thanks dear
Like and share

[@hammadkhan3792]

When the bars of different diameters are to spliced the lap length is calculated how according to ACI please reconfirm it.

[@CET360]

bro overlap is calculated considering dia of small bar, this is confirmed

[@AkhtarP3115]

Lap length is calculated as per mix design of concrete. Mix design is higher lap length is smaller and vice versa.

[@sdvpchallenge8092]

Thank you sir😊

[@CET360]

Thanks,keep watching

[@civiltechnoharyana7850]

According to 3rd amendment of IS 456: 2000 in 2007, the value was changed from 36 mm to 32 mm.

[@CET360]

what exactly are you talking about?

[@civiltechnoharyana7850]

@@CET360overlapping of steel dia

[@durgeshsinghyadav2452]

Weight steel bar ka farmula exchange ho gya hai meter ko feet,feet ko meter

[@CET360]

Thanks for correction.🎉
Keep watching

[@akshaym2523]

Grades of concrete M20 1:1.5:3 is missing 22:58

[@CET360]

Yes, dear, i might miss that.
Keep visiting for more.

[@akashtekade9879]

Hindi me samjayenge to sab ko samjh me aayega...❤

[@CET360]

Its urdu bro,same same
hindi urdu same same

[@ankitjha9249]

Good luck 🤞

[@CET360]

Thanks

[@Paraboy222]

Video is very informative
But Mass concrete ka galat bta diya slump
Low slump hota h usne 25-50 mm

[@nimmisaji7114]

Thanku sir

[@CET360]

Welcome.
Like share and comment please

[@ZainUmarAnwar-u7y]

Can i get these in pdf

[@CET360]

Reach me on facebook, inbox

[@raviraam3211]

hey the video is soo.. gud. Can I get the pdf ?

[@CET360]

Yes, drop your whatsapp num

[@harshitvaish1358]

May I get please as well

[@salumhaji3207]

Thanks a lot I like it can I get a pdf

[@CET360]

Yes, of course
Find me on facebook

[@sukumaradhikary8986]

Hi,👍

[@anuragmaurya4632]

Where , i can get a PDF ...??

[@CET360]

Yoc can find me on facebook

[@NitishKumar-fg5eb]

Thank you Sir🙏

[@CET360]

You welcome, like and share
keep watching

[@luckychaurasiya1357]

Sir hook length minimums 9d hota hai but 90° ke liye 10d or 135° ke liye 12d hota hai

[@CET360]

Yes there are provisions of 9d and 10d for hook length depending upon importance and type of structures.
But for bend dedution 10d 12d is too much.
Its 1d for 45 degreee bend
2d for 90 degrees
3d for 135 degree bend

[@luckychaurasiya1357]

@@CET360 yes bend deduction is right

[@ShoaibJamali-hg5on]

Supper information for beginners. Thanks share with us your knowledge

[@samiullhasami4077]

Sir g series ko jari Rekha outstanding work sir g

[@CET360]

Thanks. InshaAllah
Is tarah ke related videos mery channel pe hain wo b dekhen.share with your friends.

[@muhammadhammadali3968]

Raft ma lapping zone kdr hota h?

[@CET360]

Raft is same like a slab

[@muhammadhammadali3968]

@@CET360 Lapping zone center ma hoti ?

[@rajukschotabheem]

Can I get pdf bro

[@CET360]

Yes sure
Inbox me on facebook

[@KamalSingh-dk5hp]

Nice video

[@CET360]

Thanks bro,keep watching
share with your friends

[@hammadkhan3792]

Which type of steel we usually use in Pakistan TMX, TMT, CTD, HYSD, SDB?

[@CET360]

Every type is available.
Mild steel deformed bar grade 60,40 are mostly used because these are more economical.
Depdning upon the conditions and requirements koe b bar type use ke jasakti hai

[@Sexy_Anu]

RDX Grade Bars😂

[@mhdanish4700]

Long column and short column length to least dimension ratio should be less 12 or greater but you are writing 15 🤔🤔🤔

[@Ajsingh9644]

Please Sir pdf bhi daal dijiye 🙏

[@senthil02071]

75. Overlap done based on higher dia not smaller

[@CET360]

This is confusing,most viewers ask me for this correction.it is smallar bar dia.
Where bars of two different diameters are to be spliced, the lap length is governed by SMALLER DIAMETER.

[@farooqbashir4111]

Very useful Information,
Kindly, to improve it with the ACI Reference. Also provide a PDF copy with link.
Many Thanks

[@CET360]

yes sure pls

[@Sushil_Jhadekar]

Sir Urdu ke shabd sunkar to heeramandi yad aagayi 😅

[@CET360]

Mtlb apko pasand i video?

[@firdausahmad2861]

Good❤

[@civilstar1233]

Your information about hook lenth is totally wrong.....right answer is 12 D for 135 degree bend , this information from IS Code 456:2000

[@CET360]

Dear I am not wrong but you are also right .
You are mixing up two things.
1.hook length
2.bend deduction.

[@engrasgharbadshah9247]

The IS code is for India and ACI code is for international, but generally hook length is kept from 6D to 12D, but mostly it's 12D, but if add bent deduction then what should be the hook length?

[@theprashant9707]

Weight calculation formula galt h d2/162.162 will be kg/m

[@CET360]

yes there is a mistake.
I have cleared it in deacription box

[@FacterMK]

It's only use for Mild steel

[@akshayjagtap8684]

Please send this Pdf sir

[@CET360]

Ok dear find me on Facebook and inbox me

[@mansurahmedbarlaskar8033]

Sir pdf bhej do na

[@CET360]

Kahan bejun?send your email or whatsapp?
Or inbox me on facebook