Это видео недоступно.
Сожалеем об этом.
Laser Air Cutting Parameters |2kw Fiber Laser Cutting Machine
HTML-код
- Опубликовано: 8 июл 2023
- The video is all about laser air cutting parameters of 2kw fiber laser cutting machine. Don't miss it, you could find the cypcut parameters, settings, tests and practical tips in metal laser cutting.
Our Store: www.spierlaser.en.alibaba.com
Contact: clara@spierlaser.com +86-13335151833
Download the free PPS worksheet to get all the videos' link: docs.google.com/presentation/...
thank you
Welcome!
Very good
thanks
No aluminum?
I have a 2000 w raycus laser. You have a table of parameters for air cuts of different materials and thicknesses. I saw a table but it is geared towards oxygen cutting.
It is only for reference.
Bom dia tudo bem qual compressor de parafuso tenho que comprar para uma máquina leser cort 3000W
What is the laser source? Raycus or other?
👍
What is the pressure you are running at? the screen shots show 5 bar but also grayed out? is it un reglulated (running full 16 bars) at the nozzle?
It is up to your compressor.
you need to get 16 bar air compressor, with dehumidifier and air filters. Also it will need at leas 1.5 cubi meter of compressed air per minute
Cuando tengo una alarma de capacitancia disminuida
Puede encontrar la solución en los videos de membresía.
What was the focus setting for 3mm carbon steel?
You can check my videos of cutting parameters, there is reference one.
if you are cutting, with air compressor you have to go on minus value of focus distance in the steel, for 3 mm it willbe okay to have -1 to -2 depending on the height from the material
any parameter for 1000kw laser for 0.8 aluminium with compresed air?
You can find it in the video.
I think the parameters in air should adjust to 15 bars for 16 mm cs
😀
Hello, can I cut 3mm CS with 2kw raycus laser and air compressor?
I think it is okay, but the cut will be not so perfect.
It may remain slightly slaggy, but that's okay. So how should I set the parameter?
3KW Max potassium air cutting proper
What nozzle size ??
All the parameters and settings in videos are just for reference
1.5 will be enough for all the thing she had been cutting
Hi Clara, How are You?
Great, thank you.
I think you are wrong, you say speed is 11 meter but you show 11mm/s in parameter
Thank you
@@ClaraChai you mean 11 m/s or 11 m/min?
I need 2 mm carbon steel on Oxygen parameters, 1.5 kw MAX photanix
Good to know.
I will have very low speed I suggest compressed air for 2 mm. Give focus in +1 or +2. cutting speed 1.2. Air pressure 0.7. And try.With oxygen it is very hard to cut. ALL the lenses has to be clean and beam in the center.
Hoping for video for aluminium
hello, i have some questions, where can i msg you please ?
+86-13335151833