20:00 deltas are always awesome! they are ridiculously powerful for their size. after a small investigation, i found that 140x140mm delta fans are the only fans to provide up to slightly more than 400 cfm!!!!
If enough people want to see other fans running (like I did at the end of this video) and if there's enough of them I might make another video of said fans.
Hey you seem like you know your fans what would be the best suggestions for 120mm fans like brand and model and what would be nice for a 140mm fan and a 200mm fan. You know your stuff i appreciate a reply back thanks. Also which would be most cost effective brand and long lasting.
mhauck99 Well id go with a Delta as my #1 for long lasting and after that either NMB or Nidec all 3 of which use ball bearings in every one of their fans (as far as I can tell) As for models that's really up to what you wanna use it for, do you want high cfm? high pressure? quiet? stationary fan vanes?, etc.
Wow, i like your Fan collection 👏👏 various fans of various sizes and different brands 😀👍, I just collected about 450 fan unit with various brands, more details, I prefer fan collections that are rare, high speed, and branded.
I have 4 mm fans I hope I can find more of those fans.those are hard to find.I just have to see which I can find maybe like printers, more gaming console like Xbox 360,some VCR have and other stuff
Could not figure out how to respond to your response to my question about sounding a reed so here Ill ask which of the blowers you show might be the most quiet? I am having trouble finding video to demo of blowers. Thanks for helping me find a good solution!
Electrotechnics No they sell all kinds of stuff but the owner has a contracts with like the army and he gets pallets of old servers to dismantle for there raw materials and he lets me take the out fans.
Holy molly! What a huge and beatifull Collection, how much fans do you have in total? Also Do you know what type is the Nidec with orange sticker on left at 9:01? And the double nmb blowers at 16:18, double servo blowers at 16:41
1020 in total. The copper colored Nidec at 9:01 is an old one, I gotten 4 of them and only 1 still worked and it needed new bearings, I don't know the model number on that. The one at 16:18 is FT41B17\26\05B0, The Servo's are E1146X12B9AQ-10.
The Nidec UltraFlo 40mm i'd say are most powerful single hub fans as thay spin at 19000+ RPM's , or for dual hub (one pushes the other pulls) the Delta one i tested at the end of the video (also 40mm).
@@HL4EHalfLife I have a Nidec 1604O1 G80E12NS1ZN 12V DC 1.65A FAN. I took it apart from the PS3 SLIM. That's a powerful fan. I'm going to find more. I want tons of it lol.
Hello! I have the PAPST TYP 6448 2HT which is a 48V 700mA (0.7A) fan,It has 6 wires-Red,Black,Blue,White,White with Red and White with Black,I can't seem to figure out how to turn it on(I don't want to damage it by connecting it improperly),Do you have any clues on how to power it? Thank You!
I know. Ok all computer fans has red and black wires. The red wire is a positive wire and the black wire is a negative wire. All computer fans has red and black wires. If you have a old laptop charger, Try putting a red wire to a positive pin Terminal of a dc output and the negative wire behind the pin and see if it works. I hope this helps you.
I'm wondering if anyone can possibly help me. I have a Nidec Beta V TA600DC fan and its rated for 12v and TEN AMPS... Yeah a whole 10. So I've been trying to power it and it just wont come on. I gave it a max of 12.8v and 9.8 amps and still nothing. Any help would be appreciated.
Model number? upload a pic to an image site if you can, I find it hard to believe it's 10 amps seeing as I can't find anything on google and the highest I've ever seen is 3 amps and that's on a 60mm delta that does 13,000 rpms.. its probably 1.0 amps.
Jesus Christ! it really is 10 amps! I'd love to have that fan in my connection!! however after testing 100's of fans I've found that the amp rating on the name plate is a MAX possible amp draw it can do without damaging itself. For example the 3.20 amp delta fans I got don't draw 3.2 amps when running at full speed they only draw about 2 amps and that seems to be a trend for most high-powered fans.Looking up the fan on Google I notice that it has 5 wires so If you have given it 12v DC and had the polarity correct (pos red, neg black) and the fan did nothing you may need to connect up an extra wire however that can be risky as you may damage the fan, but we can eliminate the yellow wire as that's a sensor for the rpm's. The green MIGHT be the pulse-width modulated speed control but with the little info I could find on it I can't be 100% on that. If I had the fan here I could connect those 2 wires up to an oscilloscope and see what they were doing.
Well, you know, I have tried other wires so I guess its possible I damaged the fan from the beginning or this fan was busted before I ever got to it. I tired four of the wires, Red +12v, Black Neg, yellow (only because I read somewhere it could possibly be a safety wire that would need to be grounded) and lastly the blue wire. But anyway thanks for the info and help. Maybe I could get my hands on another one and try again. If anything works out, I'll let you know.
If you want to you could donate the fan to me and I could have a look at it and try to get it going (or fix it) and if I do I'll do a video on the fan and mention you in it and post a link to your channel.
Наука
![Finesse2Tymes - Pretty Ricky [Official Music Video]](http://i.ytimg.com/vi/xIoP_mhYRT0/mqdefault.jpg)
Such a fan boy ;)
20:00 deltas are always awesome! they are ridiculously powerful for their size. after a small investigation, i found that 140x140mm delta fans are the only fans to provide up to slightly more than 400 cfm!!!!
If enough people want to see other fans running (like I did at the end of this video) and if there's enough of them I might make another video of said fans.
Hey you seem like you know your fans what would be the best suggestions for 120mm fans like brand and model and what would be nice for a 140mm fan and a 200mm fan. You know your stuff i appreciate a reply back thanks. Also which would be most cost effective brand and long lasting.
mhauck99 Well id go with a Delta as my #1 for long lasting and after that either NMB or Nidec all 3 of which use ball bearings in every one of their fans (as far as I can tell) As for models that's really up to what you wanna use it for, do you want high cfm? high pressure? quiet? stationary fan vanes?, etc.
60 cfm quiet just for computer case nothing fancy not too expensive
+HL4EHalfLife Found a 100% true fanboy over here. Nice job!
i have 14 computer fans
I don't know why i find fans so satisfying.
me2
Me going through the computer scrapyard just to get some case fans and you just has it all
this video is making nostalgia hit me like a brick in the face.
more fans than Justin bieber, that's for sure
Awesome !
So much fans :O
This is my favorite video I downloaded on my phone so I can wacth it anytime 😊
Omg awesome collection !
I also have this kind of obsession
Nothing wrong with that
Same. And dc motors
Wow, i like your Fan collection 👏👏 various fans of various sizes and different brands 😀👍, I just collected about 450 fan unit with various brands, more details, I prefer fan collections that are rare, high speed, and branded.
My delta fan is powerful because is a 40MM at0.87A
I have a whole bunch of off-brand 5 volt fans that I use as a window fan but very weak
Get powerful ones it more better.
I have a ADDA 24V fan and is A 60MM
you should try a 600w san ace or a 3532 cfm delta.... the only disadvantage of the delta is that it needs 380-480v at 1.75a...
fricken sweet dude
I was thinking the box would slide off the end of the table
Seems like you're a big fan of fans
Some of the fans I got where from old computers and some I got from eBay
Nice
I need powerful ones.
I have 4 mm fans I hope I can find more of those fans.those are hard to find.I just have to see which I can find maybe like printers, more gaming console like Xbox 360,some VCR have and other stuff
I have a Nidec 70MM & a San Ace B97 blower fan
Could not figure out how to respond to your response to my question about sounding a reed so here Ill ask which of the blowers you show might be the most quiet? I am having trouble finding video to demo of blowers. Thanks for helping me find a good solution!
Err tough question I'm not sure which would be the quietest, the Comair RotRon's are fairly quiet.
Which one is smaller, most powerful and noiser?
And I thought that i had a lot having about 150 of these things plus the ones I have somehow destroyed.
where did you find them
WOW, that is a lot of really sweet fans, I am jealous, lol. Where/how did you collect them all?
Ok I just saw the comment where you said they were from a surplus store. Is it just a computer surplus place or what, and what is it called?
Electrotechnics No they sell all kinds of stuff but the owner has a contracts with like the army and he gets pallets of old servers to dismantle for there raw materials and he lets me take the out fans.
HL4EHalfLife ohhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
also have a NMB 70MM fan and a Sunon 60MM fan and a Nidec UltraFlo 80MM fan.
Alton Ebron i have MOREEE thirty
can you make a video of a 3 blade rotron fan (15:27) 🙏
Holy molly! What a huge and beatifull Collection, how much fans do you have in total? Also Do you know what type is the Nidec with orange sticker on left at 9:01?
And the double nmb blowers at 16:18, double servo blowers at 16:41
1020 in total. The copper colored Nidec at 9:01 is an old one, I gotten 4 of them and only 1 still worked and it needed new bearings, I don't know the model number on that. The one at 16:18 is FT41B17\26\05B0, The Servo's are E1146X12B9AQ-10.
HL4EHalfLife
Thank you! :)
also got a Thermaltake 120MM fan and a T&T 90MM fan
@@HL4EHalfLife that orangey Nidec was made in 1985 so its pretty darn old
You ever count them?
Very Cool are using higher Amps?
What do you mean?
Huh?
Some fans that you and me are the same my fan collection I have delta fan and blower nidec UltraFlo
What is the most powerfull fans you have in small size? (First part of the video)
The Nidec UltraFlo 40mm i'd say are most powerful single hub fans as thay spin at 19000+ RPM's , or for dual hub (one pushes the other pulls) the Delta one i tested at the end of the video (also 40mm).
how fast is a nidec gamma 30 blower fan
I think they spin at 2400RPM's.
HL4EHalfLife. What about a nidec beta v 92mm
@@HL4EHalfLife I have a Nidec 1604O1 G80E12NS1ZN 12V DC 1.65A FAN. I took it apart from the PS3 SLIM. That's a powerful fan. I'm going to find more. I want tons of it lol.
Hello! I have the PAPST TYP 6448 2HT which is a 48V 700mA (0.7A) fan,It has 6 wires-Red,Black,Blue,White,White with Red and White with Black,I can't seem to figure out how to turn it on(I don't want to damage it by connecting it improperly),Do you have any clues on how to power it? Thank You!
I know. Ok all computer fans has red and black wires. The red wire is a positive wire and the black wire is a negative wire. All computer fans has red and black wires. If you have a old laptop charger, Try putting a red wire to a positive pin Terminal of a dc output and the negative wire behind the pin and see if it works.
I hope this helps you.
@@antresia.9723 Yeah I will definitely try that,Thank You!
how do you get them? just hardware stores or??
A little here, a little there...
What are the most powerfull fans in this video, can you give my the model number? Thanks! Nice video
Where you got all of these fans?
he collected them for a long time
what is the yellow logo fan at 4:48
okay never mind its a Nidec-Talent
for science you have a red black 120mm jate loon fan in your fan collection ?
I don't know, if I do it's in the video, why do you ask? Yate Loon fans aren't that good.
@@HL4EHalfLife agree
@@HL4EHalfLife I have a Airplove fan that I dissemble out of a humidifier.
Airplove 8002-01 DC 12V 0.70A. Rating current.
What power supply did you use for these fans?
You mean to run the ones at the end of the video? just a small compact psu nothing fancy.
I use a 9V adapter for my 12V fans.
except one fan that is a papst 90MM fan.
@@tropicalstormaltonebron9134 I use a 13v and 12v adapter for dc motors and fans.
@@antresia.9723 no only 12v.
isnt this a world record?
The answer is Datech fan has very slow soft starter.
Where do you get those powerfull ones
Out of flat server cases.
HL4EHalfLife thx
I really want to find those powerful ones.including 24volts.3.3amps.
When I sad are you using higher amps I meant volts and why I asked was never seeing a fan line this with so much power
No, all the fans i ran were at 12v DC except for the Papst which was 48v DC.
I'm wondering if anyone can possibly help me. I have a Nidec Beta V TA600DC fan and its rated for 12v and TEN AMPS... Yeah a whole 10. So I've been trying to power it and it just wont come on. I gave it a max of 12.8v and 9.8 amps and still nothing. Any help would be appreciated.
Model number? upload a pic to an image site if you can, I find it hard to believe it's 10 amps seeing as I can't find anything on google and the highest I've ever seen is 3 amps and that's on a 60mm delta that does 13,000 rpms.. its probably 1.0 amps.
Jesus Christ! it really is 10 amps! I'd love to have that fan in my connection!! however after testing 100's of fans I've found that the amp rating on the name plate is a MAX possible amp draw it can do without damaging itself. For example the 3.20 amp delta fans I got don't draw 3.2 amps when running at full speed they only draw about 2 amps and that seems to be a trend for most high-powered fans.Looking up the fan on Google I notice that it has 5 wires so If you have given it 12v DC and had the polarity correct (pos red, neg black) and the fan did nothing you may need to connect up an extra wire however that can be risky as you may damage the fan, but we can eliminate the yellow wire as that's a sensor for the rpm's. The green MIGHT be the pulse-width modulated speed control but with the little info I could find on it I can't be 100% on that. If I had the fan here I could connect those 2 wires up to an oscilloscope and see what they were doing.
Well, you know, I have tried other wires so I guess its possible I damaged the fan from the beginning or this fan was busted before I ever got to it. I tired four of the wires, Red +12v, Black Neg, yellow (only because I read somewhere it could possibly be a safety wire that would need to be grounded) and lastly the blue wire. But anyway thanks for the info and help. Maybe I could get my hands on another one and try again. If anything works out, I'll let you know.
If you want to you could donate the fan to me and I could have a look at it and try to get it going (or fix it) and if I do I'll do a video on the fan and mention you in it and post a link to your channel.
change the wires aroud and see what happens. nake sure its black and red
It would be nice if you could send me one of those 172 mm metal grey fans... ( Dc sparky III) I search for them over 1 jear
dayum.
fucking more than 1000 fans.
how did u got it all?
I'm collecting fans too, but i got like 50+ not 1000+ lol.
Send me some :D
I got most of them from a surplus store for free.
Ah.. I dont have any electronic store that sells surplus for cheap in my city... tried google :\
Same I'm collecting fans too
Can u give me some of the weak ones😉
I bet sticking your finger in some of those fans would result in a severed finger tip and trip to hospital.
Oh for sure, that's why i'm careful around these powerful fans.
@@HL4EHalfLife that happened to me before It tear the skin of from my thumb.
lol im after this meny fans but cant find shit on ebay amazon r like in the 200s for a single fan as there rip offs
n plus our scrap yards in uk dosnt give away stuff no more cuz of health hazards
Daniel Horne go to a surplus store bro
U can sell these and get thousands of dollars
Arif they take 5 pence to make
スゲー
1020 fans fck thats a lot im a fan fan lol but cant find no gud fans part from 6 nmb 2.56a blower fans and 5 p4 fans i won on ebay
Give me all of these....n believe in god...you will find more ❤️
He is not going to