Long Range 18650 Battery Build Flight Video
HTML-код
- Опубликовано: 11 сен 2024
- Part 2 in my build of the 18650 4S Lithium Ion Sony VTC6 30amp batteries for long range flight.
Did you enjoy my video? Send me a thank you coffee to my PayPal www.paypal.me/...
Long Range 18650 Battery Build • Long Range 18650 Batte...
I was happy to get 21 minutes of flight time with the first attempt and was surprised that I could cruise around at 15-18amps easily.
I covered approximately 16km in total and now I have a Gps will be able to record a lot more data.
The batteries last well and the only caveat is that you need to land before they get to 11v as there is a quick depletion of volts after that.
I used Sony 18650 and the specs are below
AUW: 819 grams
2x4s packs weight is 419 grams
VTC6 Battery Specs:
Nominal Capacity: 3120mAh.
Rated Capacity: 3000mAh.
Max Continuous Discharge 30A
Nominal Voltage: 3.6V/3.7V.
Full charge Voltage: 4.2V.
Internal Impedance 13 mΩ measured by AC 1kHz.
Diameter 18.45mm max +/- 0.05mm.
Thanks for watching my new video don’t forget to subscribe, like and comment
Subscribe to my channel: tinyurl.com/wi...
Join my new Facebook group: / 2054416828151813
Email for product reviews or inquiries at: wigganrc@chocolatecity.com.au
My gear:
GoPro Hero 5 Black
IPhone 7+
Rode Video mic
Viltrox led’s
Don’t forget to subscribe and join our new facebook group here: / 2054416828151813
Check out my other playlist videos here: / @wigganrc
I liked your video very much and thanks for posting such a nice video of Drone battery pack build using Sony VTC6 cells. You should have not gone so down on battery voltage
That was cool. I was actually searching 18650s for fpv and came apon your vid.
So the key is 2p the cells.
Thats how they do it for cordless power tool battery's I think
I gotta try that. Nice advice.
Yeah definitely and 2p gives higher amp draw 👍🏾
I am not sure if you did this on purpose or not, but worth mentioning is the test area providing an element of safety should things go wrong. Being able to land on the sand at any point along the way with landmarks and a narrow width of beach would make for an easy pick up by just walking. Next challenge for you is to come to Queenscliff and do a flight over popes eye. It would be a 10 on the cool o meter. Another aspect often overlooked with RC is the RF noise floor created by commercial and domestic WiFi. I monitor error rates on my TX all the time now to keep my planes safe. Great review and testing, all the best Allen
Yeah RF noise was definitely in play and have had Rssi drops in the same place before. Now I know the limits of this setup I’m definitely heading out to your neck of the woods 😀
Yeah, signal interfere can have bad consequences
Wow dude! Nerves of steel. I seemed to panic more than you did and I was only watching.
Was a fun project. Thanks for watching 👍🏾😀
I have been flying disposable vape pen lion batteries on my 4" Geprc baby croc. Good vid!
If you are interested in a data point, I recently built a 680kv 3115 motored 12inch build running a pair of 6s4p packs for 12000mah. Flying a fair bit harder than your flight I have hit 17 minutes flying from 4.2v down to 3.6v(came up to 3.7v after an hour resting). Guessing I will be seeing 25+ minute flight times.
One of my 6s2p packs on my 7inch with 1300kv 2806.5 motors is able to hit 23minutes cruising at 40mph the entire time and lamding at 3v per cell.
6s2p helps drive the amp draw down even more versus the 4s2p configuration.
That’s great 👍🏾
Great video! Glad you made it home and your quad is still in one piece.. Those batteries are close to being a grenade
Wow that was some hell nice long range 👌 So many KM's 👍 Liked it
Thanks man 👍🏾😀
Very nice build. 20 mins plus is a great achievement. WTG!
Thanks buddy 😀
@@WigganRC Oh my pleasure. You deserve all the credit. She's nice man... I'm close starting a lilon build of my own. Just pulled the Volantex Ranger EX (fixed wing) out of the closet. Gathering all the data I can... Question please; on punch or throttle burst, do you notice any type of battery sag or rapid drainage? Just something I heard to look out for. In the future I may consider other missions. But, for now, I'm looking for slow mountain surfing...
Cheers. Didn’t notice much sag as I calculated I could pull 50-60amps max and I went to 45amps max just cruising. When the voltage is below 3v per cell there’s definitely less power though, good luck 👍🏾 Don’t forget to subscribe to the channel 😀
Wow! First I've seen of a quad flown with 18650 batteries (I don't get out much😁). Watched, liked and subbed. Gotta check out your channel!!👍👍
Thanks buddy 👍🏾😆
If you run two packs in parallel, you're adding the amp rating for both packs, so, your max should be about 60A. You should build a pack in parallel series. 2 batteries in parallel, wired the same way as the series, but with two batteries for each cell. This will save you the weight of double connectors and wires.
Those batteries are more 15-20 amp range on each cell. Go for the Samsung 30t and 40t to get 30 amp range on each cell.
Please search (Brand) 18650 data sheet before attempting any projects 3v serious drop off @ 20A current not to be rude was awesome flight
Nice build. Really impressive!
I am thinking of building an endurance 2S Li-ion 3 inch Cinewhoop (w. ducted props) and DJI Digital FPV System. Do you think its duable? What flight times should I expect? I will not be using a GoPro, just the flight camera. I want to use this build for filming and long range.
Sounds great. Not sure what flight time to expect from only 7.4v but will be an interesting build. Good luck 👍🏾
I just watched both videos and it looks like a good idea. A question, do you think a big drone like this would carry a gopro and still retain reasonable range ?
Yeah I carried a GoPro for the filming. So this is including everything for this type of range
Just found your channel brother and I love it. New Sub!
Thanks buddy. Thanks for stopping by 👍🏾😀
Ola amigo boa noite!
Qual o tempo de duracao dessa bateria para esse vôo que vc fez?
Tenho um Hubsan 501S será que dá certo?
Aguardo seu contato
Parabéns pelo canal!Hello friend good night what is the flight time of this battery that will be used in the Hubsan 501S I await your contact congratulations on the video!
I don’t have that model and specs so can’t tell you flight time. Try and see 👍🏾
Your very intelligent big brother much respect always
Thanks bro 👍🏾
awesome long range build mr wiggan rc.. suprised how 18650 batterys work
Thanks buddy 👍🏾
Is the Nominal Voltage the same thing as the Storage Voltage? And if 16.8 Volts is the entire pack around what voltage should the drone be landed with these batteries?
I know you said before 11V but that seems kind of low having in mind the prolonged, healthy life of a battery.
I am new and looking up things here and now. The only thing that puts me off on FPV is the short flight time but if I can execute this correctly I'm sold.
Yes nominal voltage is the same and can be discharged to 2.7v per cell. Don’t forget to subscribe 😀
Hi bro glad to meet I have a quad
With specifications
F450 frame
920kv motor
1045 propeller
Apm2.8FC
SIMONK 30A ESC
Fsi6 receiver
This all can handel up to 4s 14.8v
At present iam using lipo 2200 mah it gives me a flight time of 5 min when I attach my mobile phone to record video without gimbal totally I think it draws 40amp
Can u pls say which Li ion cells do I use and in which configration
So that I can get flight time of more than 18 mins
Smart looking quad. Do you find 7" is too big and unwieldly to carry around with you on trips?
Thirty-six 21700's in my refrigerator waiting to be soldered up into 6s/4s/2s packs.
Soldering with a new TS100 seems like it might be more forgiving than my handheld trigger gun spot welder which I've never used before.
Try and avoid landing in sand and dirt, some of it has iron content in it and will stick inside your motor bell housing to the magnets.
fpv.air-war.org
7” is good size for long range and lots of people use this setup. Might try 21700’s one day as well on 6s 👍🏾😊
5600 Mah used.... That's great considering how light the 18650's are mate.... What type did you use ? Panasonic ? What was that RSSI drop out all about... Did that scare you ? A little ? haha So that was 4S2P ? Great idea as I have heaps of 18650's lying around, and a guy in Box Hill selling genuinbe Panasonic's real cheap :)
Cheers, Used Sony 30amp. Details in description. Rssi was a crazy drop. Not sure why but was only 1.5km out so maybe wifi interference. Yeah 4S2P 👍🏾😀
Nice work, Great job! Hav been wanting to try this!
Thanks buddy. Hope you subscribe to the channel 👍🏾😀
Hi. Can you please post a list of your gear. Which tx/rx, flight controller, motors, 5.8 video gear, esc's, frame, etc. How do you get so far on 5.8ghz video?
Thanks
Build video and parts are here ruclips.net/video/MHx-4GHj4ro/видео.html Remember the total trip distance wasn’t in just one direction so furthest that I did away from home was 3-4km but I think upto 10 km is achievable with correct equipment and crossfire unit.
Nice!
I have a f450 and it has a consumption of 15 to 20 amps, can you help me furnish a lithium battery pack so I can use it !? I currently use a 3s 4200mah lipo.
Really nice!! Which is the AUW please?
Info was in the build video
@@WigganRC no auw or something's wrong with my eyes
Lol. Was in another video I think. AUW is 819grams without battery. My battery pack was 419g with the 18650’s in parallel. Good luck 👍🏾
I just got this battery and plan on to try it our on my flying wing
Nice. What motors, props & escs are you running here?
Thanks. Full setup in description and build video: ruclips.net/video/dCxeg6yUj5g/видео.html
Using the words "long range" doesn't mean anything without distance in real meters .... one way .... or go and come back ? What is the max distance the receiver in the drone does pick up the signal of the used remote control transmitter ? What type of drone is it ? A self assembled drone ?
It’s a self built customized drone. It has crossfire system that has a range of approx 5-10km on my setup
Hi.If use that li-on battery pack for one motor model plane how many time could it hover?
Haven’t got a clue 😄
@@WigganRC so you don't have any idea, right?
Thank you
Sorry no
great video!!
when the battery hit below 3.3V, do you also feel the need to raise throttle to hover?
Yeah definitely have to below 3.3v but great flight time gains. Scary at below 2.5v 😆
Nice TPU bling mate ;)
Cheers buddy 😀
hello, i made a similar 4S4P battery pack , but somehow it will only fly for like 2 minutes before it comes down, and again it will fly but suddenly out of nowhere the battery stops outputting current and drone drops but i am again able to arm it and fly normally for more 2 mins, this happens many times until battery drains out !! do u know why that is happening?
Sounds like the cells are bad and not genuine Sony or Samsung batteries maybe.
Nice video and very helpful! I was thinking of doing same thing with my dron but i wasn't sure is it the right thing ti do. Now I'm! Can you tell me what kind of motors you are using on this quad?
Brother hobby 2812 1115kv. Pretty good for efficiency. Don’t forget to subscribe 👍🏾😀
What is the total weight of your drone
Nice vid! I'm looking for building something bigger too for such cruising. Where can I see setup?
Thanks, Setup video is here ruclips.net/video/dCxeg6yUj5g/видео.html
Very nice drone ! How many KW does have your motor ?
1050kv Brotherhobby motors
Cool flight and Information how to make a battery that's cool will they work in a rc car to
Yes but C rating are for low speed and no fast bashing. 6s would give better performance for cars
Ingenious! love it! great work, great video! way to contribute to the community! Why go with this arrangement rather than a traditional 8s or two 4s in parallel? Does this save on weight? cost? both? thanks!
Thanks buddy. I did 4s in parallel as my setup is 6s max voltage. Cost is a factor as well. Don’t forget to subscribe to the channel 👍🏾😀
lol pushes them 18650s down to 2.5v per cell and THEN decides to fly over the water haha 🤣 Nice build tho 👍
I like to live on the edge 😂 but we now know what the max capabilities are 👍🏾
hello, I have a question for you if that is okay. I see that you have 8 batteries, is that the equivalent of 4 cells? or how does it work...? i'm trying to build a 7 inch drone and am curious as to how many LiIon batteries I need to equivalate to a 6s lipo
Was running two 4s packs to double mah to 6000mah. 6s will be 6 cells in series.
Can u say ur quad specifications
Sir,im using hskrc 380mm frame,matek f405ctr,racerstar 2213 980kv and racerstar esc 35a,my question is,can i use 18650 lion for my battrey..? Please answer.. for 3s im using 1045prop and 9045 for 4s
Yes but need to keep amps as low as possible. Use 4s or 6s higher voltage to keep amps low as 18650’s max out at 20amps with short bursts of 30 amps.
Thnks sir..
Hey mate, nice build would love to know more, frame motors etc. Subbed.
Thanks buddy. All the components in the description. Was a standard rooster frame with custom longer arms to 10-12”. Sorry but not making them for sale. Thanks for stopping by 👍🏾😆
Hello , Nice job on the battery, i have 1 , build by me 4s 3000mah. As soon i start the drone , it Pops on the googles the low bat msg. At 13.9v . Can i fly with just 1 bat , what is the minimum voltage i should land with just 1 pack? 10v?
Land at 11v ad change settings in beta flight so low batt message comes up at 11v
You can fly with 1 battery but in parallel it increased amps you can fly at.
What are the motors?
Brotherhobby 2814 1115kv
Don’t forget to subscribe to the channel 👍🏾
im building near similar setup using the 3000mah 18650 3s for my small drone and 6s 6000mah for my large drone , how do I know when to set the voltage alarm to to compensate for the voltage sag. ? atleast giving me 2min-3min remaining flight
I’d set it at 3v and land definitely by 2.7v lowest to avoid the sag 👍🏾 Good luck 😊
Don’t forget to subscribe to the channel 👍🏾
As far i can see, thats' a 4s2p battery pack with 2 pack of 4x18650 in serial and 1 parrallel conenction to get 6000 total mah... am i right? Total weight of the package? Thank you.
All info here: ruclips.net/video/xA07IbaFC8g/видео.html
@@WigganRC Thanks, great project, i think you should add a PCB to make it safier. :)
what's the max amp draw of these L-Ion batteries?
Info in the description 👍🏽
Thanks, noticed. Can i ask why osd keep saying low battery since the beginning?
Need to change voltage warning in beta flight
Hi bro
I have a quadcopter
With spec
Dji f450 Frame
Apm2.8 Fc
920kv motors
30a simonk esc
1045 propellers
M8n gps
Fsi6 tx and and rx
If I make a battery pack like u will it work for me pls reply
The nasty lipo are wasting my money as i just entered into the hobby iam nit having that much money with me
Love from india
For 4S 2P = 3120 mah / Max Continuous Discharge 30A. Ok what is the cruise max Discharge A.
2C = ? / 6C = ?
Check out this site and put your setup in. www.ecalc.ch
I've been looking for a long range frame and low kv setup. Can you share the specs: frame, arm length, motor brand & specs. Thanks.
Subscribe to the channel and I’ll go through the pain to look it up 😀
Nice vid man ..new to the hobby question for you how do make your drone fly so. Far out with out losing signal
With Fatshark diversity googles and a good Vtx and Antennas
Wiggan RC thanks for replying what shark module diversity you using, also vtx thanks 🙏
Hi why you are not using much higher amp battery it has dis advantages? Thanks done sub.
Genuine Lithium Ions are limited by amperage so connecting them in series and parallel increases amps to 60amp burst which allows just a little acro. Lipo’s are much more powerful of course but by the cost of flight time. Thanks for the sub 👍🏾
I want the 7.4v 25C lipo drone battery to replace 18650 battery which one is good for power like Lipo 25C?
Sony Vtc6 18650 👍🏾
You know you probably killed your battery capacity when you hit lower than 2.8 v per cell! Now it will not charge 100% capacity!
Bullshit. Vapers hit 2.5 all the time.
Batteries were fine. 2.5 is my max to discharge but when you hit 2.7-8 there is a considerable drop in power so stay above with multi rotors 👍🏾
Once it hits 2.8v or lower it will degrade your batteries fast and they will not charge to 4.2 agian you will only get 4.0 mabe 4.1 so ya never go under 3.0v
as we use three mobile battery to make 3s battery for RC jet but different mah e.g. 3000 2000 and 1080 can use ..plz reply me.
Not sure what you mean?
@@WigganRC the battery which you make from 18650 can i made it from phone battery.
BATERY LOW LAND NOW!!! I WAS FUCKING ANNOING!
how the transmitter and fpv goggles keep up with that range??
Wasn’t bad. Had a couple of spots go fuzzy but managed to get it back in one piece 😊👍🏾
do you use inav or betaflight?
BetaFlight with gps
How do u charge your 18650 4s
Buy a 18650 charger or do a modified battery case with a balance lead added to use your Li ion setting from your standard Lipo charger. ruclips.net/video/oLiLtPZayN0/видео.html
+Wiggan RC
Don’t forget to subscribe to the channel 👍🏾😀
Wiggan RC already done it
I wonder how Tesla cells would do.
Yeah definitely my next mission to try the 21700’s
can i use vtc4 30a sir?
They are very good to use. I’m using them also. 4s2p for 60amp ratings
@@WigganRC thnk u soooo mch sir, and gd bls u. from India
Unluckily the vtc6 is a 20amp cell its often false advertised
Yeah definitely have to be careful of copies. These were genuine and peaked at 30amps for a few seconds 🙂👍🏾
@@WigganRC no you don't understand the vtc6 is a 20 Amp cell. Despite all facts the discharge is 20 amps for the nominal tests. The 30 Amp discharge should only be done with temp control since the cell will go up to 80 degree c under this condition
How much grams Total ? Your drone
819g without batteries
@@WigganRC Hello there . my drone weighs 1200 grams. engines 920kv. Battery 3s3p 9000mah. How long do you think the flight time is?
Recep şen I am building a 9" quad with 960kv motors. Plan on to use 3S4P. What's your max flight time on your setup?
@@dronepilot1333 25 min 3s3p . Your flight time is maybe 30 minute ör 40 minute
@@TheRecep27 If I keep my AUW to 1000 grams I am confident I can go 60 minutes... What props size you use and how many amps consume during hovering? Based on your 9000mah and 25 min, your quad maybe pulling about 20 amps current?
Привет, у меня 7 inch drone 6s 18650 vtc6 ,,,,,,потребление в полете 7 amh,,,,,,,,,,,flight time 21min (2.8 min)
Good job 👍🏾😃
ok but now with 2v / cell you can just throw the battery in the trash
and in a green trash ahah
In the name of science you sometimes have to make sacrifices 😜