How To Build A Shaker Chest Of Drawers

I purchased plans for a Traditional Shaker Dresser from Tom McLaughlin of Epic Woodworking (epicwoodworking.com). Tom has been a full time woodworker for decades and is a great teacher. The plans are full sized drawings and I even purchased the associated videos as well. These are not 10 minute youtube video's. There is well over 10 hours of video where Tom is building the chest step by step with a live virtual audience. It's just like taking a woodworking class only the videos allow you to go back whenever needed.
So yes, I highly recommend the plans and videos if you are interested in building a Shaker Dresser and want some direction to do so.
Obviously I can't give out any measurements as they relate to the plans.
Here is a link to the detailed video on how I built the drawers for the chest • Building Dovetail Draw...
Here are some of the tools I used during the video. Any Amazon links are affiliate links that pay me a small commission that help support the channel.
Dovetail Marker (Lost Art Press)
lostartpress.c...
Jonathan Katz Moses Dovetail Jig
kmtools.com/pr...
Rob Cosman Kerf X-10
robcosman.com/...
True Position Tools (Cabinet Installation Jig)
amzn.to/3Mt07Bg
Tooling Leather for drawer stops
amzn.to/3OMUp0f
Freud 99-019: 39/64" Radius Convex Edge Bit with 1/2" Shank (Bull Nose for the top)
amzn.to/3BOA8zz
Whiteside Router Bits 1806 Cove Bit with 5/8-Inch Radius, 1-3/4-Inch Large Diameter and 3/4-Inch Cutting Length (Cove Molding)
amzn.to/3OqWJtz

[@bluecurlygirl]

Such a fabulous dresser. Well done.

[@DIYwithDennis]

Thanks Emer! Much appreciated!

[@PMichaels]

Wow! What a gorgeous piece of furniture. Great job, Dennis! I can’t believe how much fine detailed work was involved too. Thanks for sharing this build. It was really fun to watch.

[@DIYwithDennis]

Thanks Patrick!

[@jerrystark3587]

Well done. Thanks for the video.👍👍

[@DIYwithDennis]

Thanks Jerry! Appreciate the feedback!

[@juraciaparecidodressadori7249]

Muito Bom!

[@DIYwithDennis]

obrigado!!

[@davidr8860]

Oooooo that card scraper I need one of those.. I use a lot of grizzly I’ve never seen anyone who used that open end sander?
Is it a drum ? I could google it of course I tend to like the their opinion have a good carpenter

[@DIYwithDennis]

Hi David, I think what you may be referring to is actually a Grizzly bench top planer since I don't have a sander - I'm looking at the segment at 0:18 into the video. Let me know if that is what you're referring to - thanks for the comment! Dennis

[@Poshypaws]

If the carcass is not square at the point of construction, how on earth does one expect to resolve problems "later on"? Too few tails and too large