HI 'You mention that the instructions also cover the iENYRIDE M$PRO S+. I purchased one but the instructions do not work on my scooter, with the exceptions of the mi/km and shut off minutes. I cannot set: Kick start, Acceleration, Cruise control which I consider critical. Any suggestions?
Hold 2 buttons together and if u wanna change settings hold power button for 4 secs and the m button to change settings to unlock speed press m button 5 times until a circle appears around the gear setting u have now unlocked 30 mph mode
Well, I have iENYRID M4 Pro S+ Max if I'm getting this strange name right. I know it's a chinese knockoff like Kugoo, Joyor and the rest of'em. But - when I get into the settings I only get P2, 4, 6, 9, 16, 99. I'd like to see what the voltage setting is because it seems the battery indicator is not working as it should. After 35 km it was still full and only after 40km one bar of the battery indicator disappeared. The battery voltage at that time is 46,8V. I suspect the voltage setting is wrong but i cannot even check it. Second thing is I heard the handlebar stem is a weak point in those scooters. Is it true, have you got any experience with that? I mean people told me that the stem in their scooters just broke down there where it is welded with the base od the scooter. I looked and the welding doesn't look very safe. I wish I'd known about it before i bought this scooter... I ordered a stabiliser that is mounted on the stem and to the front fork but will it be enough? If someone could share their thoughts, thank you. Oh, one more thing, I'm getting an error 002 when I'm braking or holding the brakes for more than 3 seconds. Why could that be? This error code is supposed to be throttle which confuses me even more. Well, I have to say that the overall quality and integrity of this scooter failed to impress me, at least at the beginning... I also have an old Xiaomi M365 which seems a professional piece of ride comparing to that. I only bought this because of suspension and battery, as I have 20km of different surfaced roads to work. Oh, and the dampers are noisy as hell, at first I thought they were going off ;) Now I know that they're just like that because of bad washers and short screws that bang around when riding over obstacles. Thing that can be repaired, but hey it's a new scooter and there are so many things to sort out from the start, I have never had to do anything like that with the M365 for three years! Those M4 Kirin, Kugoo, Joyor iEnyrid rides seem to be just built with the same loose parts bought off the aliexpress or something. Like the handling bar which tends to unscrew during the ride - best choice - buy a new one. So many things to do before you can even ride safely.
@@HorizonMicromobility Thanks. Recently I had a chance to compare it to Kirin or Kugoo as it was called before. It is the same thing. The weak stem, faulty dampers, chinese make-believe LCD. Then I talked to 2 people that had accidents on Joyor and Ruptor scooters, both cases the stems came off during the ride. It seems these are all the same scooters, only different brands in different countries and slightly modified. Should've made an investigation before... I only read two or three reviews that praised the price and specs, probably paid by the producers. On the other hand those scooters sell in thousands in my country and people mostly are happy with them. That's probably because of the price. Well, since I cannot give it back now that it's used, scratched and all that, I will have to make sure it doesn't collapse while riding at least. Price of that thing in Poland is 560 Euro. Price of a decent scooter with the same specs but of better quality and tech assistance is 800 - 900 Euro. Oh well...
i havve the same scooter but my settings are different and ive not changed them like it puts my wheels on 6 even though they are 10 and the magnet one is on 18 and not 30
@@HorizonMicromobility yh i did it thought it was 4 the mileage only but change the speed reading to so thanks and also when u keep hold of mode button it full bean icon appears
Allows you to maintain your speed without having to have your finger pressing the throttle level. As soon as you brake or touch throttle lever it deactivates.
@Horizon Micromobility Ahh just like on a car. Well my scooter only moves when I pull the lever. So it must be deactivated by default. Is it worth turning on or safer to leave off. What do you think.
@@HorizonMicromobility I can see the cruise control icon when I look at the manual. But it never comes on. I'd need to look in the menu and see if it's been disabled. I'm using M4PRO S+
Also a question, when I press the M button for 2 seconds I get an icon on the speedo that looks like a light beam. Do you know what that is? It doesn't mention it in the manual.
Not at all, Kugoo is a brand. They are more well known as they have a larger marketing budget. The same factories and parts will be used for all similar scooters and just the logo will vary.
The P-settings will not affect actual speed, just displayed speed. In order to affect top speed you would need to consider a major overhaul of battery (voltage), motor, controller. Basically a different scooter. You can, however, improve torque and power by modifying the controller (e.g. shunt mod , and/or improving thermal cooling with thermal pads/heatsink/thermal paste, and/or adding additional solder/copper wire to the MOSFET traces for increased AMP capacity) OR upgrading the controller (e.g. 25AMP controller + re-wiring)...but these all require electrical work at one's own risk and, of course VOID any warranty. Naturally, if you up the AMPS to the motor you will sacrifice on battery/range.
Cruise control!!! Let’s go!!! I thought it didn’t have… put 400 miles on mine too😅
HI
'You mention that the instructions also cover the iENYRIDE M$PRO S+. I purchased one but the instructions do not work on my
scooter, with the exceptions of the mi/km and shut off minutes. I cannot set: Kick start, Acceleration, Cruise control which I consider critical. Any suggestions?
Hold 2 buttons together and if u wanna change settings hold power button for 4 secs and the m button to change settings to unlock speed press m button 5 times until a circle appears around the gear setting u have now unlocked 30 mph mode
just a FYI 99 is factory rest the last one DO is odomater rest if less then 100 miles
Hey - thanks for that 😀
Is it possible to adjust the take off power like the torque
Not that we're aware of - happy to be corrected however. List of P settings and description in vid description.
I have this same controller but mine has a password from yume. Any ideas?
You'll have to contact the manufacture - the controller is found on many scooters and it can have different firmware installed. Good luck!
@@HorizonMicromobility Ok thanks!
Well, I have iENYRID M4 Pro S+ Max if I'm getting this strange name right. I know it's a chinese knockoff like Kugoo, Joyor and the rest of'em. But - when I get into the settings I only get P2, 4, 6, 9, 16, 99. I'd like to see what the voltage setting is because it seems the battery indicator is not working as it should. After 35 km it was still full and only after 40km one bar of the battery indicator disappeared. The battery voltage at that time is 46,8V. I suspect the voltage setting is wrong but i cannot even check it. Second thing is I heard the handlebar stem is a weak point in those scooters. Is it true, have you got any experience with that? I mean people told me that the stem in their scooters just broke down there where it is welded with the base od the scooter. I looked and the welding doesn't look very safe. I wish I'd known about it before i bought this scooter... I ordered a stabiliser that is mounted on the stem and to the front fork but will it be enough? If someone could share their thoughts, thank you. Oh, one more thing, I'm getting an error 002 when I'm braking or holding the brakes for more than 3 seconds. Why could that be? This error code is supposed to be throttle which confuses me even more. Well, I have to say that the overall quality and integrity of this scooter failed to impress me, at least at the beginning... I also have an old Xiaomi M365 which seems a professional piece of ride comparing to that. I only bought this because of suspension and battery, as I have 20km of different surfaced roads to work. Oh, and the dampers are noisy as hell, at first I thought they were going off ;) Now I know that they're just like that because of bad washers and short screws that bang around when riding over obstacles. Thing that can be repaired, but hey it's a new scooter and there are so many things to sort out from the start, I have never had to do anything like that with the M365 for three years! Those M4 Kirin, Kugoo, Joyor iEnyrid rides seem to be just built with the same loose parts bought off the aliexpress or something. Like the handling bar which tends to unscrew during the ride - best choice - buy a new one. So many things to do before you can even ride safely.
We sold one and only one iENYRID scooter. The stem snapped on it and they were a nightmare to deal with so we stopped stocking it after that.
@@HorizonMicromobility Thanks. Recently I had a chance to compare it to Kirin or Kugoo as it was called before. It is the same thing. The weak stem, faulty dampers, chinese make-believe LCD. Then I talked to 2 people that had accidents on Joyor and Ruptor scooters, both cases the stems came off during the ride. It seems these are all the same scooters, only different brands in different countries and slightly modified. Should've made an investigation before... I only read two or three reviews that praised the price and specs, probably paid by the producers. On the other hand those scooters sell in thousands in my country and people mostly are happy with them. That's probably because of the price. Well, since I cannot give it back now that it's used, scratched and all that, I will have to make sure it doesn't collapse while riding at least. Price of that thing in Poland is 560 Euro. Price of a decent scooter with the same specs but of better quality and tech assistance is 800 - 900 Euro. Oh well...
How do You reset The lil dkhd Thing ??? Say You've Messed it up and want to reset it and Have all Settings , not Just selected numbers ??????
P99: Reset. Press and hold the MODE button for 5-6 seconds to reset all the parameters back to the initial settings.
What Dormancy time???
i havve the same scooter but my settings are different and ive not changed them like it puts my wheels on 6 even though they are 10 and the magnet one is on 18 and not 30
Do a factory reset
@@uncleashley6903 me too
How can I solve the problem of my scooter if the battery only lasts 10 miles with a full charge can you help me solve that please
Sounds like you need a new battery
Hello my display is broken I want to order a new one can u tell me where can I order
Just search on Google for the part number and check the connector is the same as required
can you change the speed reading setting from km to mph
Yup - that's what this video shows you
@@HorizonMicromobility yh i did it thought it was 4 the mileage only but change the speed reading to so thanks and also when u keep hold of mode button it full bean icon appears
Does anything bad happen if the voltage is changed
Yes potentially. Best leave the voltage setting as it is.
@@HorizonMicromobility thank you
Per favore, puoi dirmi se apro la velocità a 30 con me, raggiunge la velocità massima di 25. Per favore rispondi velocemente
thanks
What does the cruise control actually do?
Allows you to maintain your speed without having to have your finger pressing the throttle level. As soon as you brake or touch throttle lever it deactivates.
@Horizon Micromobility Ahh just like on a car. Well my scooter only moves when I pull the lever. So it must be deactivated by default. Is it worth turning on or safer to leave off. What do you think.
@@JasonTDolan It should come on after about 6-8 seconds
@@HorizonMicromobility I can see the cruise control icon when I look at the manual. But it never comes on. I'd need to look in the menu and see if it's been disabled. I'm using M4PRO S+
Also a question, when I press the M button for 2 seconds I get an icon on the speedo that looks like a light beam. Do you know what that is? It doesn't mention it in the manual.
TF 100 Does It Work in Ienyrid m4 pro S max?
@@zaffo5244 Try it 🤷♂️
@@HorizonMicromobility TF-100 work on my Ienyrid M4Pro S+max! But M button doesn’t work if press 5 time to change different speed
Five consecutive times
What does error 5 mean on m4 pro S
"High Pressure"
What does ERROR-002 mean?
"Speed Level ERROR"
My kugoo m4 pro has no p-2 setting only 3 and so on
Same! I have kugoo m4 pro
Hi! When did you buy it ? If recently then im pretty sure that they removed it as mine has!
@@subarugobrrr2487 yes, I bought a new one recently because my original one the throttle snapped
@@Catobergcontent Oh yeah then they remove it as mine still has and got it in june
Is IENYRID M4 a Fake Replica of the Kugoo Kirin M4 PRO?
Not at all, Kugoo is a brand. They are more well known as they have a larger marketing budget. The same factories and parts will be used for all similar scooters and just the logo will vary.
The P-settings will not affect actual speed, just displayed speed. In order to affect top speed you would need to consider a major overhaul of battery (voltage), motor, controller. Basically a different scooter.
You can, however, improve torque and power by modifying the controller (e.g. shunt mod , and/or improving thermal cooling with thermal pads/heatsink/thermal paste, and/or adding additional solder/copper wire to the MOSFET traces for increased AMP capacity) OR upgrading the controller (e.g. 25AMP controller + re-wiring)...but these all require electrical work at one's own risk and, of course VOID any warranty. Naturally, if you up the AMPS to the motor you will sacrifice on battery/range.
What's the password?
no passwords
there's 0 comments here about how to increase the actual speed of the scooter SADD
How do I change km/h to Mph
That’s covered in the video.
7 is for you speed
No it's not. It changes the speed on display but you don't actually go any faster.