Hello. I’m thinking of buying a Joyor Y7-S. For the max speed, do I have to do P15 for it because I’ve seen videos of people setting it to 100 and being able to max out their speed without cutting any wires.
Ok so how do you change the settings from 500w too a 1000w but my scooter only has p2/p4/p9/p16/p99 ..... p2 is miles p4 is sleep p9 is zero start p16 is cruise and p99 resets the settings any ideas how to make it go up hills better because it is a 30mph scooter and the motor power does 500w 800w and a 1000w
Hey guys I have 2 Joyor y6s and on both of them I have set 25 on magnet number. One reaches 52 with wheel spining în the air and The other reaches only 40. Where do you think that is The problem? Thank you
@@cezaraionela238 best to leave the magnet setting as it only changes how display reads/estimates speed. Reset both scooters to factory settings and use gps not scooter to measure speed and then compare.
Hey! I just bought the Joyor F7 50.2 (I think it's a variation of the LR800). I wanted to know if there's a hack to increase the top speed from 27.8mph to anything higher. I've heard you can remove a wire from the motor controller, but I wanted to know which one and what kind of consequences that change may have on the scooter's motor/battery's health and longevity. If you have any tips, please let me know! I appreciate the video!
Remove the blue wire that’s looped from the controller. Should be accessible from the front wiring loop or by removing back cover plate at rear depending on scooter model.
I've got s5, and this piece of crap apparently have display for 42v and battery 55.6, so it shows charge incorrectly. 🤦🏻 Joyor is the worst thing you can get. Simply trash.
@@HorizonMicromobility true, except for black-orange Inokims and ninebot max g30, they are thash some more some less. But joyour and kugo are trash number one. Dumbest engineering, worst cells possible. It's like african engineering was "upgraded" in ussr.
for p7 what exactly happens when you change the magnets? Like what does changing it do with your scooter.
Hello. I’m thinking of buying a Joyor Y7-S. For the max speed, do I have to do P15 for it because I’ve seen videos of people setting it to 100 and being able to max out their speed without cutting any wires.
How can access the p08???
Hello i have a f3+ and there is no blue cable at all… how can i make it faster/remove speed limiter?
If you manage to show and help me i will paypal you 40euro
Dont think so if there isnt a blue cable down in the wrap side on the front wheel i hava the f5s+ and it has it i dont think you can
@@deadoflegend5737 how I increase the speed on the f5+?
Did you fix
Can i change the speed on gs5??
hey! got F1 and it shows wrong speed as well as the distance covered. any ideas how to fix that?
Ok so how do you change the settings from 500w too a 1000w but my scooter only has p2/p4/p9/p16/p99 ..... p2 is miles p4 is sleep p9 is zero start p16 is cruise and p99 resets the settings any ideas how to make it go up hills better because it is a 30mph scooter and the motor power does 500w 800w and a 1000w
🤷♂️
how do change the max speed from the different gears? 🤔 thanks i have the Y6-ss E-scooter
When you derestrict the scooter by removing the blue wire also change the P setting from 30 to 25.
Hey guys I have 2 Joyor y6s and on both of them I have set 25 on magnet number. One reaches 52 with wheel spining în the air and The other reaches only 40. Where do you think that is The problem? Thank you
@@cezaraionela238 best to leave the magnet setting as it only changes how display reads/estimates speed. Reset both scooters to factory settings and use gps not scooter to measure speed and then compare.
What is will happen
@@HorizonMicromobilityhow do you reset the scooter to factory?
is that working for JOYOR Y8-S Electric Scooter
Sorry we don’t do that model. Try it: takes 2 mins 🤷♂️
@@HorizonMicromobility Thank you very much
Did it work?
@@HorizonMicromobility i have the scooter not yet but soon then i tell you thanks
nope a blue wire needet to cut in the controller box it self the nthe scooter runs 33kmh
Thank you.....You really solved my problem😱😳✌✌✌✌✌
Yay! Glad we were if help 🛴
Thank you thank thankyou...Thanks to you ......THANK YOU.....I totally understand my scooter settings.....THANK TO YOU....
@@josephcolon7110 you’re welcome, you’re welcome, you’re welcome 😉
hey I have a joyor f1 and I was wondering if you can share me a tutorial on how to remove the speed restrictions step by step please thanks
Don’t think any restrictions are on the F1
@@HorizonMicromobility okay
@@HorizonMicromobility how about the G5? I just bought it and don't know how to remove the speed restrictions
If i cut the blu cable, can something bad happen?
It’s just a loop of wire to restrict the speed to EU limits
Is this work on Y10 joyor?
Only one way to find out….
Hello, although I increased the p 15 value, the speed of the scooter did not increase.
How can I make it auto gear 3 when i turn it on
Press the mode button 👍
@@HorizonMicromobility i know but when i turn it on it puts it at 1 not 3
@@MrSeal6127 should be 3 if you left it in 3 🤔
@@HorizonMicromobility i leave it in 3 turn off than on and it's 1
@@HorizonMicromobility is there a p setting for it???
What is p mode
P setting are where you can change various settings. i.e. max speed, change km to miles etc
if I remove the speedlimiter can I make it go slower again in the P settings?
If you decrease the P15 value it will put down the power of the motor then the scooter would go slower.
Hey! I just bought the Joyor F7 50.2 (I think it's a variation of the LR800). I wanted to know if there's a hack to increase the top speed from 27.8mph to anything higher. I've heard you can remove a wire from the motor controller, but I wanted to know which one and what kind of consequences that change may have on the scooter's motor/battery's health and longevity. If you have any tips, please let me know! I appreciate the video!
There should be a blue wire that is looped from the controller. If you remove this then any speed restrictions will be removed.
@@HorizonMicromobility does taking it off do anything but drain the battery faster
@@joeltiensuu1292 Yes if you go 30 kmh all the time but no difference if you drive 20kmh
@@joeltiensuu1292 did you find blue wire I have a 2022 version and i dont see any blue wire
I have joyor F3+ 2022 and i have 2 blue wires🥴
How to get access to p8?
Can you please charge ur scooter?
Will do…. Scooter is now on charge 👍
This works whith all joyors?
Yez
@@Dewoncord with Joyor Y8-S is that working too
Hi there,
How can I increase the speed?
Remove the blue wire that’s looped from the controller. Should be accessible from the front wiring loop or by removing back cover plate at rear depending on scooter model.
@@HorizonMicromobility Thanks for replying,
Model is X1, I removed it but all the wires is black, what shall I do?
@@tarekhamza6510 is this at the rear of the scooter? Is this a EU Joyor?
@@HorizonMicromobility X1 joyor
@@HorizonMicromobility in front
P15???
That’s the motor drive setting. Don’t change that.
I've got s5, and this piece of crap apparently have display for 42v and battery 55.6, so it shows charge incorrectly. 🤦🏻 Joyor is the worst thing you can get. Simply trash.
@@Bogdanini same as most scooter companies then
@@HorizonMicromobility true, except for black-orange Inokims and ninebot max g30, they are thash some more some less. But joyour and kugo are trash number one. Dumbest engineering, worst cells possible. It's like african engineering was "upgraded" in ussr.