@@WTFRCCars 2 motors separate. 1 motor for one esc 1 for another with 1 receiver. I'm using 2 Novak Super Roosters with 1 red wire pulled but these have no drag brake.
@WTFRCCars i know can t find any info about motor limit tho 80amp is nothing 20years ago they were 300amp constant novak s brushed .esc are crap now I can t even find a good 3s esc lipo brushed all brushless now good ones
Guy 😮 im dragging my Tamiya falcon into the 21st century 🎉 ive already fitted the flysky svc receiver which is awesome 😊 now im looking for a mid price speed controller which will not break the bank 😀 would you recommend the 1080 ESC?
Ive bought this a month ago for my tt02 touring. Nice review! Didnt think of use the real driving feature but no i will haha. Just assign a button for reverse
Yeh i just tested this out. For racing mode which is only forward and brake. The reverse trick wont work together with that. As its setting 4 on the program card. Let me know if u get it work.
You would have to set it to forward/brake/reverse and then enable real car mode, then set one of you channels to trigger the reverse that way you won't be able to revers without hitting the channel you have set
Thanks on the wires. I needed to know which wires to plug in to receiver great job
No problem 👍
Do we have to pay separately for programming card if u don't own one?
Yeh they dont come with one now
Can you run 2 of these via Y harness pull one red wire?
The blue programming card shows different listing & is the only one available will it still list the same function order as the red programmer?
You mean 2 motors if so yeh
Yeh the program cards should work the same just have different options on the stickers
@@WTFRCCars 2 motors separate. 1 motor for one esc 1 for another with 1 receiver. I'm using 2 Novak Super Roosters with 1 red wire pulled but these have no drag brake.
@@WTFRCCars Ok thanks for the info!
What does the Freewheeling do?
Just no drag brake so the RC will roll when you let off the throttle :)
Verry straight forward mate, is the program card for gen 1 can work for gen 2 ?
Yeh same same card works for both.
Dumb question but can this be used in 4 wheel drive race buggies like and old school Tamiya or is it only for rock crawlers?
Yes it can and works very well in tt-02 and the likes :)
@@WTFRCCars that’s exactly what’s it’s going in thanks!
Great video👍
Do you know what the turn limit is on this? I can't seem to find it anywhere
There's no turn limit on the g2 it's 80 amp constant and 400 amp peak so should be ok with almost anything
@@WTFRCCars thank you for your reply👍
@@paulfam1932wow , i was worried about an 11T
What s motor limit on 3s can it take 15t 3 slot 3s
There is no motor limit listed just 540/550 motor size, the esc has 80amp constant and 400amp peak so should be fine with most motors out there.
@WTFRCCars you sure can t be 80amp is not much other esc 80amp have 18t limit 3s that will burn out 14t 3s
Just go on hobbywing site and look at the manual that's where I got the info from
@WTFRCCars i know can t find any info about motor limit tho 80amp is nothing 20years ago they were 300amp constant novak s brushed .esc are crap now I can t even find a good 3s esc lipo brushed all brushless now good ones
On aliexpress says 18t limit 3s
my new fav esc, never got a program card, great explanation
Glad ya liked the vid :)
Guy 😮 im dragging my Tamiya falcon into the 21st century 🎉 ive already fitted the flysky svc receiver which is awesome 😊 now im looking for a mid price speed controller which will not break the bank 😀 would you recommend the 1080 ESC?
Yeh definitely work really well for tamiya's :)
@@WTFRCCars I'm on it 😉
The G2 has some interesting features for RC cars too :)
@@WTFRCCars Thats the model I was looking at 😉 40/50 pounds
@vintageschumacher yeh really good esc
Very Naice Review!!! THK's for the Share!
Thanks for watching!
@@WTFRCCars 🐼
Ive bought this a month ago for my tt02 touring. Nice review! Didnt think of use the real driving feature but no i will haha. Just assign a button for reverse
Yeh really nice feature 👍
Yeh i just tested this out. For racing mode which is only forward and brake. The reverse trick wont work together with that. As its setting 4 on the program card. Let me know if u get it work.
You would have to set it to forward/brake/reverse and then enable real car mode, then set one of you channels to trigger the reverse that way you won't be able to revers without hitting the channel you have set
nice review mate 😎
Just fitted the sierra on the carbon TT 01 chassis looks spot on :)
@@WTFRCCars can't wait to see it when it's finished
It's up at the shop with me now ;)