How to Replace Fuel Injectors 2011-2019 Ford Explorer (3.5L V6)

Buy Now!
New Fuel Injector from 1AAuto.com 1aau.to/ib/1AFI...
This video shows you how to install new fuel injectors on your 2011-2019 Ford Explorer (3.5L V6). Fuel injectors are computer controlled spray nozzles that deliver fuel to your engine in precisely controlled volumes. They are one of the keys to modern efficient and clean engines. If a fuel injector is dirty or failing, it can present symptoms such as rough idle, engine surges, rich or lean conditions, and check engine lights. Replacing a problematic fuel injector with an engineered to fit TRQ replacement part right away is essential to the health of your vehicle’s engine.
This repair was done on a 2013 Ford Explorer Limited 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Ford Explorer
2012 Ford Explorer
2013 Ford Explorer
2014 Ford Explorer
2015 Ford Explorer
2016 Ford Explorer
2017 Ford Explorer
2018 Ford Explorer
2019 Ford Explorer
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obEz/1A...
• 10mm Socket 1aau.to/obDz/1A...
• 8mm Socket 1aau.to/obDz/1A...
• Fuel Line Disconnect Tool 1aau.to/oaX/1AX...
• Trim Tool Set 1aau.to/oauu/1A...
• Pliers
• 1/4 Inch Ratchet 1aau.to/obDz/1A...
• Ratchet 1aau.to/ob5h/1A...
• Torque Wrench 1aau.to/oa7W/1A...
• Cloth Rags 1aau.to/oMF/1AX...
• Gloves 1aau.to/oaWI/1A...
• Safety Glasses
• Pick 1aau.to/o2w/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@omarcurbelo5342]

Very very good video. Just saved me a bunch of money and even more valuable gave me peace of mind. Thank you.

[@gavindore5585]

Thank you

[@KP-Pro2A]

What kind of spray solvent?

[@Jeyhailio]

How did you get the fuel rail clips on? It’s so hard…

[@danyilsekunda9227]

Thanks!
Could You please tell how did You know which injector had to be replaced? I have problems with ignition in 6-th cylinder. Coils are new. When the engine goes more than 5500 rpm - check light starts to blink. Forscan shows such code: P0306-P Cylinder 6 Misfire Detected. That happened just after chain, water pump etc. were replaced: I drove away from service and made a test drive.

[@aherna176]

Thank you for help

[@LewisBeck-sx5yy]

Love to see it

[@jbell7098]

Was u getting a code

[@jbell7098]

Why did you just replace that one

[@russelwandler4586]

My 2017 looks totally different from this

[@venommonster7168]

🔥💪💪💪

[@omarcurbelo5342]

Very very good video. Just saved me a bunch of money and even more valuable gave me peace of mind. Thank you.