How fast do you guys think this thing will go? Please SUBSCRIBE and LIKE the video if you enjoyed! It really helps me out a lot! Check out my Instagram: 2_vintage_ Thank you for all the support!
Rick sobiak was the builder, lived on pearl street in oneida, died about five years ago, hell of a builder and mechanic. He was my neighbor and good friend.
Just some advice from someone that diagnoses wiring problems every day. When you jam the multi meter leads in you will spread the pins open in the plug and they will have a loose connection afterwards!! Invest in back probe leads for wire diag!!! They come with different size pins and you won't ruin the pins in you're plugs!!! Keep up the good work!!!
I think you'd find a remote starter comes in handy for times like these. It's just a handheld tube with a button at one end and 2 wires at the other ending in alligator clips. Clip 'em on the solenoid and use the button instead of a screw driver. They shouldn't be any more than $20.00. That's a pretty cool, well built machine and you could easily double your investment cost if you sold it here in Maryland. Pretty sure get more than twice what you paid for it.
That second spark plug you tested for spark produced a spark but it didn't look like the spark jumped between the side and center electrode. It looked like the spark appeared at the end of the porcelain insulator and center electrode. Was hard to tell from the video. Might be an illusion, but if what I think I saw is true, the spark plug will have to be replaced.
First videos are always the most boring, but in saying that the second video of I guess you could call them a “series” for a build is always good fun to watch, and the final video in the series when you’re riding the project
Oh,"the beast" again... All 4 plugs have to have a solid blue spark for that Honda to run properly,not 3,not 1 on each cylinder... Also the builder piggy backed onto that black wire coming off of the start button; which is one side is 12v power in and the other is 22v power out to the piggy backed wire perhaps and all have to have a clean good connection.. Yiuve proven the solenoid to be working as well as the power switch aka key and an ohm test of each plug wire will determine if it's good or not as will the coils... Now that you've gone ahead and dumped good gas into a nasty gas tank you now get ti remove and rain and flush the tank,lines,replace the fuel filter and r n r the carbs doing a thorough cleaning job... It'll run again and run like a champ but taking the lazy shortcuts just to get it to fire off only makes more work for one in the end Grasshoppuh. And id drain and thoroughly inspect both that oil and cooling system for leakages between...
don't leave those exhaust pipes straight make sure you get a muffler on them , or you will burn out the exhaust valves , i seen it happen over head cam must have back presseuer
If you change out that sprocket you wont go faster. Youll get to your top speed faster but you wont go any faster. If you make a bigger sprocket on the back you will go faster but youll take longer to get there. If you got enough power bring up the size of the front sprocket you might get it to go a bit faster without losing to much acceleration. (at least how I understand sprockets and gear ratios)
Good afternoon, so my son has a 100f crf honda. It's been broke down for some time now. Oil leaking from gear shift. Does not want to start. Any help would be appreciated.. has compression. I think he went mud bogging on it but won't fess up.. frustrated with it. I'm about to dump it.
Hello, I have a question since I love watching you work on stuff and getting it running again, I’m not too experienced with 2 stroke engines but I have a boat motor that will not start unless I spray fuel down into the reeds though the intake, the carbs are clean and it’s getting fuel but it won’t draw it into the case (why it runs when I spray it in). It has brand new reeds and I’ve checked them anyway and they are fine.. so I’m assuming it’s a big air leak like a crank seal.. could this be the cause? Because that’s the only thing I can think of. Thank you and I love the channel!
Wrong tires for pulling n those wheelie bars are just gonna dig in n stop you dead. Throw some small wheels on the wheelie bars n throw some meaty tread on it n it'll be unstoppable
The wheelie bar was to stop it from tipping over and crushing you between the sled and the tractor and that was all, as far as the turf tires go those were run because of the class it was in
@@neumansown did you even read what I said? You put small wheels on the wheelie bar instead of flat plates which will dig in n kill your pull. As for the tires I'd made my comment before he had said he got 2 sets of tires with the tractor
Dude what did you ratchet it down for in that trailer it barely fit in it as it was wasn't going anywhere unless you went 100 off of speed bump and launch the thing out of it
How fast do you guys think this thing will go?
Please SUBSCRIBE and LIKE the video if you enjoyed! It really helps me out a lot!
Check out my Instagram: 2_vintage_
Thank you for all the support!
like 10mph
Imma say like 50mph?
Fast enough to make you yip hahahaha Joe be safe
I wil give u 500$ for that kawasaki 3wheeler
45-50
Rick sobiak was the builder, lived on pearl street in oneida, died about five years ago, hell of a builder and mechanic. He was my neighbor and good friend.
nice
That's cool. I'm trying to build something similar. I've managed to get to 30mph
When you get this running you have to try and wheelie this
You can wheelie a stock lawnmower lol
@@LandonMartien ehhhh, yeah but its not the same
@@M.TTT. if you add more weight to the rear you can wheelie high
@@LandonMartien yep
Cheers for ruining the vid
I wired a swich to my Solenoid, and it Turned over.Now she rips! I love your vids man!
i bet your neighbors love ya always bringing in new shit wondering how loud its gonna be coning out of the garage lol
haha yeah this one is a little loud
I like the CUT SCENE while offloading it from the trailer! Right before it slipped off the side.... Snip snip. Lmoa
It's a real privilege to watch you tackle these projects, particularly MX bike from the 90s, thanks
Cool find! A lot of work went into making this VF500 Interceptor motor work in this.
Wife: WTF is that?
Joe: Its a tractor, i only paid $420
Wife: 420 makes sense cuz you musta been high ... Take It Back, Now !!
Just some advice from someone that diagnoses wiring problems every day. When you jam the multi meter leads in you will spread the pins open in the plug and they will have a loose connection afterwards!! Invest in back probe leads for wire diag!!! They come with different size pins and you won't ruin the pins in you're plugs!!! Keep up the good work!!!
For $420 that thing is pretty awesome!
"not enough to start a fire" 😂. Thing looks like a beast!
18:03 your package came in for eBay
Sick man nice video working on a 500cc go kart snowmobile today
I think you'd find a remote starter comes in handy for times like these. It's just a handheld tube with a button at one end and 2 wires at the other ending in alligator clips. Clip 'em on the solenoid and use the button instead of a screw driver. They shouldn't be any more than $20.00. That's a pretty cool, well built machine and you could easily double your investment cost if you sold it here in Maryland. Pretty sure get more than twice what you paid for it.
this is what happens when your wife doesn’t keep an eye on what you do in the garage. quite a collection of boat anchors your getting😀
Wow, didn't expect this. Thing has to be nuts......
31:00 wow never seen gas that bad, good the fuel pumps working. Gonna go thru a few filters on that one.
Keep it simple. Keep it Vintage. Great stuff man.
Wow she’s a beast nice find joe
That thing is so cool very well-engineered man I wouldn't mind having something like that pretty cool
Time fer some lawn tractor racing ☠ nice machine joe nice find🤟
This dude really has something new everyday, like how does he pay for it
RUclips money almost 200,000 subscribers
Buying and selling bikes I do it where I live there’s money to be made if you know what your doing
@@mathewearl1328 facts
awesome looking lawnmower mate
Now this is a legit beast, everything else you pick up is barely feral. Put some wheels on the wheelie bar and drop the clutch.
Awsome projects lately keep doing your thing.
2 vintage is turning into flair with this background music
yea with the 4 plug vtwin hondas both plugs fire at same time but it also wont run if only one plug is firing
I need them choke plungers / cables. lol
What a sweet guitar lick
Dats a crazy custom
Good job mane 👍🏻 clean them carbs and jets and she will purrrrrrrrr😸
Being that it’s a streetbike engine(just like in the “banshee 600”) is there a clutch switch that has to be depressed for the starter to engage?
Should grab yourself a solenoid jumper trigger they work awesome for revivals
You gotta a pretty cool machine there and you didn't pay to much shoot I payed 700 for a quad that I didn't know was blown up until 3 days later
Why do we all jump back like we got hit in the head by a 2x4 on that first solonoid spark🤷♂️ its bot like we don’t know what gonna happen😂
Almost, 200k!!!!
You need to source a kx500 for the channel I feel it’s the only bike missing you done the cr500 now is the time to get the kx500 👍
“Had to have the 69 in there somewhere” had me and my buddy cracking up lol
Can't wait to see the next video
This thing is actually dope !
Man you need to join up with john and Ike and race there lawn tractor 👍👍👍
that would be sick!
Cool something different looks great 👍
Nice one joe not watched yet but love this already x
Very cool! 😎 you should race chuck with your dads tractor 🚜 🤣
I finished watching this, i wamt pt.2 now
About 105 toped out. For a 500 v twin. When it was in the bike. Put a mower deck back on it. Mow the lawn in a minute.
Your channel is the best
Death trap....love it..
That second spark plug you tested for spark produced a spark but it didn't look like the spark jumped between the side and center electrode. It looked like the spark appeared at the end of the porcelain insulator and center electrode. Was hard to tell from the video. Might be an illusion, but if what I think I saw is true, the spark plug will have to be replaced.
First videos are always the most boring, but in saying that the second video of I guess you could call them a “series” for a build is always good fun to watch, and the final video in the series when you’re riding the project
Good stuff man
Thanks for another cool video you know what you are doing
25:48. That’s what she said 😂😂😂
Imagine still dropping it off the trailer with ramps lol 😂🤦🏽♂️
Lol the edge of the ramp broke off 🤣
@@2vintage I already was ready for it to happen idk how I just had a feeling lol
Funny thing, I'm going to get one of those LOL 🤣.
Very good cheap and godbless from philippines
You talk about a choke but don't use it. Great video we cannot buy anything like your toys for less than 3000 USD in UK.
Yessssir now I like this project
Let me know if you ever want to sell any of these projects lol
Oh,"the beast" again... All 4 plugs have to have a solid blue spark for that Honda to run properly,not 3,not 1 on each cylinder... Also the builder piggy backed onto that black wire coming off of the start button; which is one side is 12v power in and the other is 22v power out to the piggy backed wire perhaps and all have to have a clean good connection.. Yiuve proven the solenoid to be working as well as the power switch aka key and an ohm test of each plug wire will determine if it's good or not as will the coils... Now that you've gone ahead and dumped good gas into a nasty gas tank you now get ti remove and rain and flush the tank,lines,replace the fuel filter and r n r the carbs doing a thorough cleaning job...
It'll run again and run like a champ but taking the lazy shortcuts just to get it to fire off only makes more work for one in the end Grasshoppuh. And id drain and thoroughly inspect both that oil and cooling system for leakages between...
whats up bro great video
It has a "rpm gauge", 👍
Use the plug thats already out to test the spark on the rest
Joe I sent you a solenoid jumper switch. Use it. So you don’t burn down your garage. 😆
That’s sick !!
Are you going to continue to try to fix up the mule? I would love to see it.
how are you finding things like this i can barely find a good dirt bike too fix up
Nice buy too
That is so sick
don't leave those exhaust pipes straight make sure you get a muffler on them , or you will burn out the exhaust valves , i seen it happen over head cam must have back presseuer
Did you try engaging clutch for the starting issue?safety switch may be on it to prevent getting ran over
If you change out that sprocket you wont go faster. Youll get to your top speed faster but you wont go any faster. If you make a bigger sprocket on the back you will go faster but youll take longer to get there. If you got enough power bring up the size of the front sprocket you might get it to go a bit faster without losing to much acceleration. (at least how I understand sprockets and gear ratios)
420 dollars for the 169 tractor, lol. Pretty cool machine though
that having absolutely no suspension at all it is a total death trap
most racing tractors have none, but race on a dirt track, not pavement -- as far as I know.
It was built for lawnmower tractor pulls
@@neumansown ok that makes sense
Try pushing in the clutch pedal and then try to start it?.
You might need to press the clutch to get it to turn over!!!!!!
I was literally thinking of putting a wankal or old artic cat panther sled motor into a lawn mower
Awesome video
Good afternoon, so my son has a 100f crf honda. It's been broke down for some time now. Oil leaking from gear shift. Does not want to start. Any help would be appreciated.. has compression. I think he went mud bogging on it but won't fess up.. frustrated with it. I'm about to dump it.
2v timeeee. Phuck yeah gonna be a good one
Send It
Shouldn't be rust those have plastic tanks just looks like water mixed with bad gas
Hello, I have a question since I love watching you work on stuff and getting it running again, I’m not too experienced with 2 stroke engines but I have a boat motor that will not start unless I spray fuel down into the reeds though the intake, the carbs are clean and it’s getting fuel but it won’t draw it into the case (why it runs when I spray it in). It has brand new reeds and I’ve checked them anyway and they are fine.. so I’m assuming it’s a big air leak like a crank seal.. could this be the cause? Because that’s the only thing I can think of. Thank you and I love the channel!
Spray anywhere that could be a air leak. Don't spray in carb just anywhere it could suck air and try starting. When it fires you found your leak.
Good video
Damn ahha you guys are fast aah
I know it’s there life goal to be first every time, and it’s funny when they say there first but they aren’t
🔥🔥🔥🔥🔥🔥🔥
Push the clutch in to start it
@Whoop!
Hey atleast you only payed 420$ for it ;)
Wrong tires for pulling n those wheelie bars are just gonna dig in n stop you dead. Throw some small wheels on the wheelie bars n throw some meaty tread on it n it'll be unstoppable
ag tires filled with ballast and extra weight on the back.
The wheelie bar was to stop it from tipping over and crushing you between the sled and the tractor and that was all, as far as the turf tires go those were run because of the class it was in
@@neumansown did you even read what I said? You put small wheels on the wheelie bar instead of flat plates which will dig in n kill your pull. As for the tires I'd made my comment before he had said he got 2 sets of tires with the tractor
Yes you are correct, sorry I blew up, I can delete the comment if you would like
@@neumansown no big deal man, we all gotta mellow out a bit man
Dude what did you ratchet it down for in that trailer it barely fit in it as it was wasn't going anywhere unless you went 100 off of speed bump and launch the thing out of it
push the clutch and try,,honda has a safety,I can see the diode
Do you still have the 400
I clicked so fast when I seen the title
U race vasly builds when he get his done
I've never seen a liquid cooled engine with cooling fins on the cylinders.
Like The Vid 2 vintage fam
Garage tour?
Great😎