Connecting Two VMware Virtual Machines and Entire Physical Network
HTML-код
- Опубликовано: 19 авг 2024
- Use bridged networking
Configure a bridged network connection for the virtual machine. With bridged networking, the virtual machine has direct access to an external Ethernet network. The virtual machine must have its own IP address on the external network.
If your host system is on a network and you have a separate IP address for your virtual machine (or can get an IP address from a DHCP server), select this setting. Other computers on the network can then communicate directly with the virtual machine.
Use network address translation (NAT)
Configure a NAT connection for the virtual machine. With NAT, the virtual machine and the host system share a single network identity that is not visible outside the network.
Select NAT if you do not have a separate IP address for the virtual machine, but you want to be able to connect to the Internet.
Use host-only networking
Configure a host-only network connection for the virtual machine. Host-only networking provides a network connection between the virtual machine and the host system, using a virtual network adapter that is visible to the host operating system.
With host-only networking, the virtual machine can communicate only with the host system and other virtual machines in the host-only network. Select host-only networking to set up an isolated virtual network.
I must admit, even if i struggled understanding what you were saying, I understood everything and i am very greatfull for your video, thank u very much!!
This is a useful tuitorial i dunno why so many people disliked :3
Because i had to warn viewers that video is in English. I also disliked!
because it's not in english, despite the title being english
Love you my brother... I was like going mad to connect my virtual machine to host and as shown in video godd it was sooo easy dude ... Google was showing such typical type of content which I was not able to understand at all dude... But now it's fine lol. ! Thanks a lot...😍😍😍😍😍😍😍😍
Thanks man, I finally got the server working afrter so many complications,
Great, it worked for me....Thank you
Simple easy great video =) greetings from turkey
both google and i can't understand your language...
when I try to ping between the virtual machines it does not work.
Thank you very much.
Thanks for knowledge sharing
Thank you for this video-
I have 2VMs 1.Domain A and 2. Domain B and I have used the bridge connectivity but my Physical connection i.e. LAN is from Domain C which does not recognize Domain A and Domain B and also I cannot do anything on Domain C as I am not the admin nor can i request anyone to help. Can you please provide a solution ?
Sir mere laptop m vmwere ye local connection nhi dikha rh
sir you are great....
Thanks man.
Hello vijay.....when i turn on my vmware it said there is no IP address on pnet0 I am literally going to mad I have tried all methods but could not get it how to bring pnet0 interface an IP address I am really really thankful to you if you can help me with this.Thanks and regards
Thank you. You are great
you gave your own ip add to vm that ip add which are in the same series of physical mechine how will the net sharing take place
I have three Virtual Machines
VM1 RouterOS Mikrotik 6.42RC.1
VM2 Windows 7
VM3 Windows 7
VM1 is set as DHCP server i want VM1 to get connection from my Physical network and give IP addresses to VM2 & VM3 along with internet i am confused do not know how to set it up.
Can you make a tutorial on small lab like that.
Does anyone know if it require the Pro version or it can also be done in the free one? I have the free version and I can't do what he shows in here
I am using the free version and i am facing the same problem, could you please tell me how you solved it if you did :))
Can I control my physical network from a laptop on which I have configured Pfsense in vmware workstations inside windows 10
I want to connect my virtual machines to guest and accessible to lan as well
How to connecting one laptop VMware with another laptop VMware. Exp: I have two Laptop one is Dell and another is HP and I installed VMware in both of them. Now I want to connect Dell laptop VMware with HP laptop VMware through Cat6 Cable and these two laptops should communicate with each other. Kindly tell me the steps. Thanks
Try to put both laptops in the same Workgroup . Select Control Panel /System&Security /See the name of this Computer . Under " Computer Name , Domain, Workgroup settings " click Change Settings and type the same Workgroup Name ( any name ) for both Laptops . Hope will work .
Dear Vijay, thank you for this video. I have host machine with two NIC and two guest virtual machines. I want to connect each guest VM to each own network. So I know I must use bridged connection in order other computers on network can access vm guest. The problem is that guest VMs belongs to completely different networks in different classes. How to ensure that guest VM1 be part of its own network and VM2 to be part of its own (since they belog to different networks).
thanks
on what english is this movie?
I have installed server and windows 8 in VMware. I don't have internet connection. I have configured AD in server and want windows 8 to communicate with server so that I can join domain. Please give some suggestions
Sunny Solanki you can select only bridge connection, you ignore the replicate physical connection
Vijay Yadav do I have to give DNS or default gateway. If yes then in both the machines(server and 8) the DNS and default gateway must be same
Sunny Solanki wondering if u were able to resolve this issue ?
Hello sir,
I have configured DHCP Server in one VM and another VM having windows 7 client joined with the server.
I want to avail DHCP in client pc from the Server VM. what should be the settings on both the sides??
you can select any VMnet both VM as a same VMnet number like VM1 as VMnet2 and VM2 as VMnet2
Vijay Yadav
Sir trying to do so..but the client is obtaining apipa range...can you pls update a demo of the same if possible.
Sure
DC ka setting kya hai vo to apne bataya he nahi sir , kya ada adhuri information deto ho, khali client ki he information batayi, DC ka batana bhul gaye , kya sir ji ..
sir malum hai apko sub kuch ata hai lekin jara djhirese to batana ..itna fast batake kidhar jana hai kya..samj mai bhi ana chahiye na
when i change the ip address to static and type the ip address it tells me unidentified network and it doesn't connect dunno what is the problem :/ any help please ?
Please check ip"s subnet
How ?
hi,
how about the whole network of the company for example?can it handle multiple networks in one virtual machine?
Nadnad Vinarao, bro company never use Vmware workstation it is only use for testing, but in production network only use Vmware vsphere (esxi cloud) and then create virtual switch in vsphere cloud.
thank you for your response Vijay Yadav...so it is the same in the real world that what happens in the virtual machine you can do it to different clients or (user account) in a single server?
dont work
tite alag or kam alag where did you show physical network ping virtual network Chooo T
This is BS he is using the Window server and have installed VM ware on it please who installing on windows 10 and not on Windows server. Also connecting two linux vm RHEL or CENTOS not windows vm
I don't think VM ware has that option like Virtualbox where you do NAT Network
Don't put english titles if you won't speak english ffs.
192.168.1.100 Apne physical machine Ka iP se liye ho kya
Nope, 192.168.10.100 is the first VM ip