The absolute best method to remove old plasti dip!!!

Поделиться
HTML-код
  • Опубликовано: 31 янв 2025

Комментарии • 44

  • @RedlioNxTR
    @RedlioNxTR 3 года назад +15

    Noooop! I used Goo Gone and it's good! Spray on wait some minutes depending on the thickness of the dip, spray some more. Let it soak in and do its work and then use a rubber scraper to remove it! IF it has soaked in properly and you patiently have waited, it's like removing melted cheese. :D

    • @officialWWM
      @officialWWM 3 года назад

      What is this Goo Gone you speak of?

    • @Phuong_Nguyen_
      @Phuong_Nguyen_ 3 года назад

      @@officialWWM from Walmart

    • @officialWWM
      @officialWWM 3 года назад

      @@Phuong_Nguyen_ we don’t have Walmart in Australia :/

    • @RedlioNxTR
      @RedlioNxTR 3 года назад

      @@officialWWM You have to spray it on, leave it for 2-3 mins, spray more and repeat, until it fully softens and makes the plasti dip loose

    • @officialWWM
      @officialWWM 3 года назад

      @@RedlioNxTR ok, thanks.

  • @YorumiTech
    @YorumiTech Год назад +1

    what a great video. u should have 100000views . so scientific too. thank you😂

  • @MichaelFrazierTube
    @MichaelFrazierTube 2 года назад +1

    you just saved me 3g;s. thanks so much!

  • @rochelle.l.rochelle5219
    @rochelle.l.rochelle5219 4 года назад +4

    Love the garageless garage

    • @RobsGarage
      @RobsGarage  4 года назад +2

      Haha thanks! I'd love it alot more with a garage

  • @zaceaton1074
    @zaceaton1074 2 года назад +1

    man just gathered whatever he had under the sink 🤣

  • @RAM-VIC
    @RAM-VIC 4 года назад +6

    Why didn't you just use dip desolver?

  • @BigfootsnMopars
    @BigfootsnMopars 2 года назад

    Good to know!

  • @revit4909
    @revit4909 4 года назад +4

    Try CRC brake cleaner worked for me about $7 on Walmart Throttle cleaner probably works better but wouldn’t use that if you care about what’s below

    • @RobsGarage
      @RobsGarage  4 года назад +1

      I use crc all the time. I should've used that but had the 4 dollar can laying around and I am cheap lol. Thanks for the feedback!

    • @MattAyala-ux5bd
      @MattAyala-ux5bd Год назад

      Not good for paint

  • @frankguerrero7991
    @frankguerrero7991 4 года назад +3

    Thanks ! Just what I needed to know !

  • @thazsar
    @thazsar 3 года назад +1

    Needed this info!!! Thx so much

  • @garyleeheard3434
    @garyleeheard3434 Год назад

    Gas works too . Takes it right off .
    But I've seen goo gone works good too

  • @cindym.3316
    @cindym.3316 5 месяцев назад

    Why not use a simple hairdryer??

  • @headdownharris
    @headdownharris 4 года назад +1

    what if you care about the paint? I gotta hood with 5 yr plasti i need removed so i can trade in my car. if i do it real quick like and wash it right after will it really jack up the paint? the paint is 13 yr old silver paint that is in pretty good shape on a toyota fj. thanks.

    • @headdownharris
      @headdownharris 4 года назад

      mine was about 5 coats, too. fyi

    • @RobsGarage
      @RobsGarage  4 года назад +1

      I would go rags with paint thinner. Don't let the paint thinner sit on the paint to long.

    • @zachowns1023
      @zachowns1023 3 года назад

      Goo gone works good also

  • @cacadeperro1231
    @cacadeperro1231 4 года назад +2

    Woked pretty good

  • @TattooedRobot
    @TattooedRobot 2 месяца назад

    GOO GONE.

  • @ntaylor0214
    @ntaylor0214 3 месяца назад

    Best method is a pressure washer with a fine tip ! Balloons that shit rt off

  • @yungdonniejacuzzis4103
    @yungdonniejacuzzis4103 4 года назад +5

    Spit and elbow grease

    • @RobsGarage
      @RobsGarage  4 года назад +1

      Hahaha its true donnie

  • @tristantopambudi3186
    @tristantopambudi3186 Год назад

    Plastikote paint remover and jet wash

  • @Moosmmaskm
    @Moosmmaskm 11 месяцев назад

    Use meguairs car glaze

  • @ravenzbot
    @ravenzbot 5 месяцев назад

    wrx remover lmao i'm literally doing this to a wrx

  • @yayito857
    @yayito857 3 года назад +2

    What a waste🤦🏽‍♂️

  • @MrLegendL2118
    @MrLegendL2118 4 года назад +1

    why are you wiping plasti dip, if you put in on thick enough you just have to peel it off & I've done this many times

    • @RobsGarage
      @RobsGarage  4 года назад +5

      When it shivels up like that, has has been on for 9-10 years it doesn't peel like it once would have. If you notice the front driver side corner had a small portion missing where I had tried to peel it.

    • @headdownharris
      @headdownharris 4 года назад +3

      @@RobsGarage 5 yr old plasti just flakes too, it aint gonna come of in one piece at all.

  • @MoneysWorld1989
    @MoneysWorld1989 3 года назад +1

    Why not just peel it

  • @robertogrinder
    @robertogrinder 3 года назад +2

    I feel like I was victimized. I watched about a minute of this video and now I'm victimized. What do you expect from a product that you had on the car for that long. If you wouldn't have been so cheap and actually sprayed it on thick enough you would have been able to peel it off as advertised.

  • @PRDMRE
    @PRDMRE 3 года назад

    MEK

  • @joe84111
    @joe84111 3 года назад +2

    You talk too much