You did a Great Job!!! I think you for showing the software and the the pressing of the shirt. I've been following you for a little and your teaching is on Point❤
Thank you for all of your great info. I purchased my Ricoma finally and am so excited for it to arrive. I used your link so I hope it gets back to you ;-)
Great video and you are very easy to listen to. I can tell you love what you do! I need to get that Lion T for my husband and the black one for myself 😊
Thank you so.much for helping us! With 2 presses, do you have each do both steps of warming the plates and pressing images or do you divide the responsibilities among the two machines?
Hello, I recently bought a RP200 and im struggling with prices for oversized designs. What would be a good price for the lion t-shirt? Thank you for the video!! You are great at explaining everything!
what are the correct setting for the iKonix Model:HP-3838H 15x15 Heat press and how do I set ? I'm confuse with the the red and the blue on keypad, Please help... TIA
I have done the marrying with the Transparent and the Adhesive paper for 300 dg and 120 sec about three times and when I do the peeling steading and slow it removes some Image ink. what am I doing wrong? please guide me.
i have watched many of your videos & learned a lot from them - this paper that you use - can you use this on an ink jet printer or just the white toner printer - awesome job on all of them
Katrina, could it be possible to use the second split one inch overlay thats blank to match them together and then press both or separately just a thought.. Thank you for all the videos you do. God bless
Hi! Thank you for reviewing this process with us. I was wondering- with the program you were using for the images, was there an option to split the large image in between the words and the lion?
I showed how I split it in the software. I don’t understand your question. The software split it in half. But you can crop the image and split it yourself if you want it straight down the middle instead of the words.
@@katrinasgracefulcreations3711I believe that this person is asking can you control the where the split happens? Instead of allowing an exact split which cut through the letters, could you have moved the split to between the letters and the lion? This would've allowed for not having to worry about the letters potentially being misaligned.
One more questiom i have a dell laptop and a hp all purpose 8022e office jet printer am i capable of printing and making these same images with what i have to work with at the moment thanks in advance for your response
Any laptop is fine as long as you have space to hold the software. I’m no tech I don’t know all printers. I only research printers I’m interested in or before I buy what is best for what I need to do. So research your printer.
hello katrina. im having trouble with splitting an image. its splitting but with a gap in between the split which leaves the photo missing a line . how do i fix the missing line
Thank you, I love your videos! I am learning so much from your content. Please keep it up. Now for my question, Where did you get your white workspace table? I am looking for something that will be long enough and tall enough that I don't have to constantly lean over and hurt my lower back. Can you give info on the name, model, or anything so we might be able to purchase? Thank you again for all you do!
Hi just wondering if you can help with a problem my husband is having with his Ricoma luminaris 200 all this prints that are suppose to be black are coming out navy blue he's back up with orders and cant figure out a solution would you know a solution ?
I bought the whole package deal with Ricoma and the printer and now for some reason they got rid of that spit feature in the software and I really wanted to use it to make at least 10” wide images now I can’t they told me I can only make designs as wide as the paper which is 8.5” do you have any suggestions? Btw I love your videos and ℹ subscribed and always hit the like button
I sent her a question about the same thing. I don't know why they would remove this feature. she hasn't responded. I am not savvy enough to understand photoshop have you found out anything. Please let me know.
Hey let me start of by saying you do amazing videos, keep up the great work Queen! But my question is on your printer do you leave the voltage transformer box on even when you’re not using your printer or do you turn it off after you’re done using it? I have the same printer and didn’t know if I should turn off the voltage box or not.
I don’t have the split button I had Lumi rip software, but then all of a sudden the name changed to vividrip Now I have no split button. At least I can’t find it.
Hi Sis! Love; and Immensely Appreciate Your Entertainingly very Informative videos!👏🏽🥰 Is the Ricoma 1501 Embroidery machine; worth the investment please? As I Am still deciding.🤔Thanks A Million & God Continue to Bless; With Perpetual Success!❤️👑
I am still learning the software. I think it’s a great investment if you think it will scale your business if you create the right products and truly use it it will pay for itself. That’s the whole goal with any purchase. When I first bought my 1st heat press I thought $900 was way too much and scary but so glad ai did. It started my entire journey. So it truly based on you and your business and what you will use it for. Hope that helps.
The link is in the description box creative fabrica I use a lot of their images. Great site for everything sign up for $1.00 for the first month all access
When you knock out the black it last longer and better feel, but you get plenty of washes out them. I have only washed my shirt fairly about 10 times so far. Wash test review coming soon.
@@katrinasgracefulcreations3711 we are getting our setup going. Are you planning on printing to other garments? Or using the printer for mugs, tumbers ect?
The paper from Ricoma. I show it all in the other video with the white toner printer. I can’t think of the name of it. But the link is in the description box for the Ricoma products. You will find it on their website.
@@katrinasgracefulcreations3711 i know its a stretch nut would you mind sharing me with the link you found the lion file at.. i have searched etsy and i cant find it. please
Why wash inside out? 🤔 I understand the reason for all of the other directions, but I'm not sure why inside out is different than any other method. Can you or anyone in this thread explain? 😉 Thanks.
Question: on the spot image could you add smaller images on the side to use more paper or do you not recommend that? Thank you. I got mine because of you and I’m trying it today. FYI. If you don’t want the heat press they only take like 199.99 off the price so if I did it again I would just take it and then sell it or keep it as a backup. If I had the space I definitely would have take it to make an assembly line (business woman’s dreams).
You can definitely gang sheet it and fill it in with multiple images. As many as can fit to fill to save money. I do that sometimes for sure. Congrats on your new printer. You're gonna love it.
@@katrinasgracefulcreations3711 glad you knew I meant split and not spot. Ok my first 3 prints were good until I tried to marry them to part B. Any tips?
Thank you so much for demonstrating the split feature ! ❤️🙏🙏 you are an angel
Did you figure out how to do this split thing? Software has changed and i have no clue!
has anyone responded about the update? @@dawnjohnson638
Love your videos! Clear, concise, generous and honest! Very appreciative and look forward to your future videos!
Thank you so much
You did a Great Job!!! I think you for showing the software and the the pressing of the shirt. I've been following you for a little and your teaching is on Point❤
Appreciate it. Thank you for watching. Glad to help.
Agreed…you explain it way better than the videos from Ricoma and in order!!!!
You are a god sent woman. Thank you for ALL YOUR VIDEOS 🙏🏼
You’re very welcome
Because I have been buying the images of Amazon and I wanted to print them myself I'm glad you're doing this video
Glad to help
Thank you for all of your great info. I purchased my Ricoma finally and am so excited for it to arrive. I used your link so I hope it gets back to you ;-)
The black woman shirt is BEAUTIFUL!!! 💕
Thank U…This is golden!! Im still in research mode b4 hitting BUY.
Definitely do your research.
Love you video I’ve learned so much 🙏🏻 I have the software that doesn’t split anymore
Beautiful love it your amazing. Thank for all your help.
You’re welcome
Great video and you are very easy to listen to. I can tell you love what you do! I need to get that Lion T for my husband and the black one for myself 😊
It will be added to my Etsy shop tonight. You can check back later tonight or tomorrow. Etsy shop will be linked down below in description box
Another awesome video.Very informative! Love the Lion image
Thanks
Thank you so.much for helping us! With 2 presses, do you have each do both steps of warming the plates and pressing images or do you divide the responsibilities among the two machines?
Love this video great job in explaining the process. Your great at it. Thank you.
Good video Trina.
Nice! The white toner
This is good So I have a white Turner 8 by 11 I love it good for some things
Thanks Thanks Thanks! Love your teaching!
Thank you so much.
I've been meaning to ask if you can please do a vid on your organization system? I like the way you have everything in the right place. Blessings!
Yes definitely once I move I will be doing a huge room tour. But I will show the space I'm in now as well.
@@katrinasgracefulcreations3711 Thanks!
I loved your video💕
Thanks for demonstrating the process🙏🏾
Thank you for watching.
great video!!!!!!!
I have this same set up and gonna try my first split print
You are good, I'm looking forward to getting start.
I love my led lights in my craft room 😊
You definitely should sell you DTF images :) I don't have room for another printer. I do buy those you'd do well.
For the black shirt have you thought about making fringes and bringing it a little close to the design and then you can sell it.
hey im new to this and have the luminaries, should I be doing test prints on regular paper? and thanks for the awesome helpful video
Hello, I recently bought a RP200 and im struggling with prices for oversized designs. What would be a good price for the lion t-shirt?
Thank you for the video!! You are great at explaining everything!
Thank you you for this informative video. Love the shirts
the software has changed can you do a video showing how to split the image. my viv rip software has not split feature.
Absolutely fabulous 🙌🏾🙌🏾❤️
Another great video 😍😍😍
Thank you
Great Video as always 👏🏾👏🏾👏🏾
Thank you
Awesomeness 👌🏼 👏 👍
what are the correct setting for the iKonix Model:HP-3838H 15x15 Heat press and how do I set ? I'm confuse with the the red and the blue on keypad, Please help... TIA
I have the same system you have. I have been trying to figure out how to split the image but software has changed. Can you possibly help.
I have done the marrying with the Transparent and the Adhesive paper for 300 dg and 120 sec about three times and when I do the peeling steading and slow it removes some Image ink. what am I doing wrong? please guide me.
I enjoy your videos. Very well explained and demonstrated. Could this design be printed with Easy Subli?
Thank you and yes
Are you saying you can use easy subli in this printer?
I don’t have the split icon on top, where else can I find it? Thanks
Nice job!
Hello i like that how you mirror your words
You did a great job, I want one so bad can't afford it right now
Gret job!!!! Love it
Hi Katrina. Can you make a video showing how to make a gang sheet. I am having problems adding pictures together.
I already have please look under videos and search gang sheet on my home page.
Which heat press you like the most the 15x15,, or the 16x20? Is the 16x20 to big ?is the 15x15 more then enough room ?
I truly love the 16x20 more surface it’s a workhorse.
i have watched many of your videos & learned a lot from them - this paper that you use - can you use this on an ink jet printer or just the white toner printer - awesome job on all of them
This paper is specifically for the white toner printer. Each machine has their own paper and different uses. They can’t be interchanged.
Katrina, could it be possible to use the second split one inch overlay thats blank to match them together and then press both or separately just a thought.. Thank you for all the videos you do. God bless
You have to press them separate because of the transfer paper.
How do I get my black setting real dark without changing my other colors ??? Help
Thanks for doing this video
Where can I find that lion design and how much it cost?
Hi! Thank you for reviewing this process with us. I was wondering- with the program you were using for the images, was there an option to split the large image in between the words and the lion?
I showed how I split it in the software. I don’t understand your question. The software split it in half. But you can crop the image and split it yourself if you want it straight down the middle instead of the words.
@@katrinasgracefulcreations3711I believe that this person is asking can you control the where the split happens? Instead of allowing an exact split which cut through the letters, could you have moved the split to between the letters and the lion? This would've allowed for not having to worry about the letters potentially being misaligned.
I know you said toner cartridges are 199. Is that for a single color or a set of all 5?
Where can I buy white toner transfer paper
Good video thanks looks good
WHAT TYPE OF FILE IS NEEDED FOR LUMIN RIP SOFTWARE?
Wow it really encouraging.I wanna do you creat those designs or u buy them.if there is a any website pls share
Yes I have been talking about the site ai use in multiple videos. Creative fabrica. The link is down below in the description box
One more questiom i have a dell laptop and a hp all purpose 8022e office jet printer am i capable of printing and making these same images with what i have to work with at the moment thanks in advance for your response
Any laptop is fine as long as you have space to hold the software. I’m no tech I don’t know all printers. I only research printers I’m interested in or before I buy what is best for what I need to do. So research your printer.
Can you make sublimation on cups we this ricoma? I'm new I buy this machine I dont now how to use
Sublimation no but you can make prints on mugs I will be doing a video on it soon
Love it go girl
These look amazing!!!! How did the wash come out?
Comes out just fine. Wash inside out warm water
I dont see the split option on my vividrip
Hi. Arr you considering selling DTF transfers on your etsy. I would buy for sure. I would live to do DTF but i cant afford the printer
hello katrina. im having trouble with splitting an image. its splitting but with a gap in between the split which leaves the photo missing a line . how do i fix the missing line
I have never had happen so I’m not sure.
I'm just starting out ,and I have a hp Essential,all around productivity office jet 8022e Printer Do you think it'll work with my printer
I don’t anything about that printer. Sorry
Oh wow, this is absolutely beautiful!
You actually talked about it some, but I wanted to know (if you used a DTF printer) which printer do you prefer?
I don’t have a DTF printer
@@katrinasgracefulcreations3711 ohh gotcha! Thank you for responding!
Thank you, I love your videos! I am learning so much from your content. Please keep it up. Now for my question, Where did you get your white workspace table? I am looking for something that will be long enough and tall enough that I don't have to constantly lean over and hurt my lower back. Can you give info on the name, model, or anything so we might be able to purchase? Thank you again for all you do!
I will link it down below took me a while to find the perfect crafting table.
Love love love I'm your new friend 👋🏾
Heeeeyyyy friend.
Hi just wondering if you can help with a problem my husband is having with his Ricoma luminaris 200 all this prints that are suppose to be black are coming out navy blue he's back up with orders and cant figure out a solution would you know a solution ?
No I wouldn’t have a solution. He definitely needs to call the customer service number. I call them anytime I have any issues. Sorry
How to load the legal sheets
How do the full color images on the Luminaris 200 compare with the colours on a UNINET icolor 560?
I don't have a Uninet. But they do the exact same thing. so colors are the same I'm sure.
I bought the whole package deal with Ricoma and the printer and now for some reason they got rid of that spit feature in the software and I really wanted to use it to make at least 10” wide images now I can’t they told me I can only make designs as wide as the paper which is 8.5” do you have any suggestions? Btw I love your videos and ℹ subscribed and always hit the like button
I sent her a question about the same thing. I don't know why they would remove this feature. she hasn't responded. I am not savvy enough to understand photoshop have you found out anything. Please let me know.
Does this still work because I can find those options anywhere
did you have to change a setting for the split tool to be there? cause i cant find it on my luminrip screen.
No I didn’t change anything
Is it true that the luminrip software doesn’t offer the split option anymore? Or do I have the wrong software?
Hey let me start of by saying you do amazing videos, keep up the great work Queen! But my question is on your printer do you leave the voltage transformer box on even when you’re not using your printer or do you turn it off after you’re done using it? I have the same printer and didn’t know if I should turn off the voltage box or not.
Thank you. I turn everything off when not in use.
What’s the best ink?
How do you get the split feature on the software mine doesn't have it
I did an updated video of new software with the split feature. Please look at that video.
ruclips.net/video/QP8wyrFqHZY/видео.htmlsi=OiYBV29DAZWDax9S
Hello, I am wondering why I don't see my split option 🤔 Help!😪
Ricoma took that feature off
@@jackiexoxo87 can we use a different program?
Do you have to get that one
Hie , does it print like a real image of a person
Yes whatever image you have you can print it
I would like to buy that software with those images can you tell me the name of the software with the images on it
The name of the software for the printer is the Rip software it comes with the printer.
Hi what paper do you use and where do you purchase at?
The paper for the white toner machine? I said it all in the video in the beginning. All the info is in the video did you watch?
What are you using to split your image now that they took that feature away?
I don’t
Mine came with VividRip and I can't seem to find it. Any luck?
Can you use this printer for sublimination?
no
I don’t have the split button I had Lumi rip software, but then all of a sudden the name changed to vividrip Now I have no split button. At least I can’t find it.
It’s not there anymore but I’m going to be doing a video showing how to get it back very soon stay tuned. They took the feature away.
Hi Sis! Love; and Immensely Appreciate Your Entertainingly very Informative videos!👏🏽🥰 Is the Ricoma 1501 Embroidery machine; worth the investment please? As I Am still deciding.🤔Thanks A Million & God Continue to Bless; With Perpetual Success!❤️👑
I am still learning the software. I think it’s a great investment if you think it will scale your business if you create the right products and truly use it it will pay for itself. That’s the whole goal with any purchase. When I first bought my 1st heat press I thought $900 was way too much and scary but so glad ai did. It started my entire journey. So it truly based on you and your business and what you will use it for. Hope that helps.
Thank you blessings
Will the Cameo printer USB cord work?
You know I never tried it. Didn’t even think about it. Hmmmm
Can I ask where do you purchase your adult shirts?
Here is a video that might help
ruclips.net/video/w_hgwsByEgI/видео.html
THANK YOU.
Where do you get the images from that you're choosing
The link is in the description box creative fabrica I use a lot of their images. Great site for everything sign up for $1.00 for the first month all access
How many washes are you getting from the shirts?
When you knock out the black it last longer and better feel, but you get plenty of washes out them. I have only washed my shirt fairly about 10 times so far. Wash test review coming soon.
@@katrinasgracefulcreations3711 we are getting our setup going. Are you planning on printing to other garments? Or using the printer for mugs, tumbers ect?
What's the name of the software that came with the printer
Lumin Rip (if I’m spelling it right)
what paper do you usually use?
The paper from Ricoma. I show it all in the other video with the white toner printer. I can’t think of the name of it. But the link is in the description box for the Ricoma products. You will find it on their website.
Can u pls send me the steps in pinting t shirt with just an iron. Because i dont have the machine yet pls.
I have never used an iron
where did you get the lion design from.
Etsy
@@katrinasgracefulcreations3711 thank you
@@katrinasgracefulcreations3711 i know its a stretch nut would you mind sharing me with the link you found the lion file at.. i have searched etsy and i cant find it. please
My Luminaris 200 does not have a split button, why?
Any luck?
How much does that printer go for?
Around $4000
Why wash inside out? 🤔 I understand the reason for all of the other directions, but I'm not sure why inside out is different than any other method. Can you or anyone in this thread explain? 😉 Thanks.
Helps with less cracking from what I hear.
Hey Katrina, how much is the printer?
Hello did you watch? I gave the price in the video.
Question: on the spot image could you add smaller images on the side to use more paper or do you not recommend that?
Thank you. I got mine because of you and I’m trying it today.
FYI. If you don’t want the heat press they only take like 199.99 off the price so if I did it again I would just take it and then sell it or keep it as a backup. If I had the space I definitely would have take it to make an assembly line (business woman’s dreams).
You can definitely gang sheet it and fill it in with multiple images. As many as can fit to fill to save money. I do that sometimes for sure. Congrats on your new printer. You're gonna love it.
@@katrinasgracefulcreations3711 glad you knew I meant split and not spot.
Ok my first 3 prints were good until I tried to marry them to part B. Any tips?
How much does this white toner run for?
It’s in the video…did you watch?
Would you sell just the print if and send it to u?
I have to set it up in my Etsy shop
@Katrina's Graceful Creations please keep in touch with that. I like to support you if u do that then to deal with big companies.