I bought my wireless bicycle computer from West Biking, but their video instructions were very limited, used yours as a real guide on how to install and worked much better for me. Good video and thank you!
Very straight forward video. I am thinking of buying a wireless speedometer for my bike however I am making it stationary. Therefore, only the rear tire is going to spin, can I install it on the rear tire and get accurate readings? thank you.
@@robertporter1143 I don’t have that bike computer anymore . But from what I remember. Press and hold both button. Kilometers comes on blinking . Hit the right button to change to miles
Seems pretty durable and works in this video. Decided to order one recently for my Dahon folder after stupidly folding the handle bars down the wrong way and snapping the wires on the Cateye computer I had on that one.
NOTE: To change from mph to kmh you must remove battery.... Holding Mode button down can access all settings EXCEPT the mph/kmh one. Stupid glitch which took me a while to realise. HTH!
I had bought this same speedometer.. but i dont how to off this speedometer when im not ride.. is it have off function or i need to remove the battery?
Will you need to remove it from your bike every day? Or you can just leave it on your bike everyday? And can you turn it off after use? And how do you know if its low battery?
Just fitted mine, seems to work fine.I fitted to my normal bike, was going to fit to my electric bike so I can monitor speed, but the bars are full with light, bell. Will test on my normal bike and get another for my leccy bike if I like how they work.
Hi! Just want to ask for updates on this Since this is almost 1 year ago, just want to ask if it pass the test of time? Is this still arcurate and is the battery not draining too fast? thank u!
This was very accurate for me and worked great, I used your video as a guide for the installation. Do you know how to change the speed from Miles to KM?
@@rodneyemmerich8828 i just put it at the place where the two spokes cross. Then I mount the wireless transmitter as close to the magnet without hitting it. Zip tie is your friend.
7:30 MXS 93 km/h? 93 m/h? Both to fast for a bike driver, or not? You think this is normal, TechGuru Andrew? Why do you not would like to explain this?
Mine stopped showing speed and the signal bars while driving. Checked the batteries of both computer and sensor which are good so not sure what the problem could be. Anyone else have this issue? Computer still good for time but stays on 0.0 km/h
@@abets.1176 Figured out my problem after opening up the sensor. It seems the transmitter coil wiring broke loose off the board. The wiring feels really fragile and delicate and way to small to repair myself. Perhaps it isn't really up to handling the shock of mtb riding. I guess you get what you pay for
Hey my friend do you know how to turn off the spedometor when i am not ride the bike.There is any option or just turn off automatically and shows off only time
@@TechGuruAndrew Thank you for advice i install it the way you say it because i left the paper with construction in garden and my husky makes it 1000 pieces .
![ROSÉ(로제) - APT. (Band VER.) (With. 이영지) [더 시즌즈-이영지의 레인보우] | KBS 241129 방송](http://i.ytimg.com/vi/IW8qaemx74g/mqdefault.jpg)
I bought my wireless bicycle computer from West Biking, but their video instructions were very limited, used yours as a real guide on how to install and worked much better for me. Good video and thank you!
Thanks guy. I would have never figured it out without you!
How do I switch from km to mi?????
Very straight forward video. I am thinking of buying a wireless speedometer for my bike however I am making it stationary. Therefore, only the rear tire is going to spin, can I install it on the rear tire and get accurate readings? thank you.
The only thing I noticed was it was never programed for a wheel size, if it does not know this how can distance or speed be accurate??? TECH GURU?
He said he had 28" wheels and set it for 2234, which is what the computer wants you to enter for that diameter.
At 2:40 he changes to mph take battery out and press left button underneath
Thank you sooo much for that info. You rock!
Hi so do you switch from km to miles????????????????
KPH/MPH selection is available only at the moment we insert the battery.
By default KPH first show up, press M to keep or S for MPH.
Thank you for your video. Very detailed. I didn’t need the instructions manual thanks to you. Great job .....👍👍👍👍
Happy to help
How do I switch Km to mi
@@robertporter1143 I don’t have that bike computer anymore . But from what I remember. Press and hold both button. Kilometers comes on blinking . Hit the right button to change to miles
Seems pretty durable and works in this video. Decided to order one recently for my Dahon folder after stupidly folding the handle bars down the wrong way and snapping the wires on the Cateye computer I had on that one.
NOTE: To change from mph to kmh you must remove battery....
Holding Mode button down can access all settings EXCEPT the mph/kmh one. Stupid glitch which took me a while to realise. HTH!
My fastest test for my speedometer read 40 km/h
How do you set it up for the backlight to stay on?
Press both buttons at same time.
size of mount can use with Garmin/Cateye or Gopro?
Very helpful! Understandable and straight forward ! Thanks
Look at the wheel sizes. Only shows 18in and up
How do I switch km to mi
@@robertporter1143 unfortunately, I dont have this speedometer anymore so I dont know
I had bought this same speedometer.. but i dont how to off this speedometer when im not ride.. is it have off function or i need to remove the battery?
The only thing you can do is to remove the battery, but you don't need to and you're not meant to. The battery is very durable
Hey. Can you help me? I have the same brand of speedometer. And after 15km/h it just says that i am stopped.
Will you need to remove it from your bike every day? Or you can just leave it on your bike everyday? And can you turn it off after use? And how do you know if its low battery?
You can leave it , an change batery after 1 year for sensor
How to keep lights always on?
Please can write down the model, brand etc so i can search it through my local online stores,
Just fitted mine, seems to work fine.I fitted to my normal bike, was going to fit to my electric bike so I can monitor speed, but the bars are full with light, bell. Will test on my normal bike and get another for my leccy bike if I like how they work.
Can the mount be set up in a way that the computer can fit on the stem?
yes sorry for the late reply😅
Will this work for extremely small wheels like 3-4 inch? Assuming I could get it mounted.
Yes
Yes but it will be very wrong
Hi. It written in the manual we should save the details while changing the battery. But they didn't mention how to save. Do you know???
Lmao why you care just set it again... Its cca 8 euros mate what do you expect
Why light mode last 3 seconds and then turns off?
Thank you!! Those instructions in the "manual" are not clear..
You're welcome!
How do you set it? Did i miss something?
Подскажите, при 29/2,1 какие параметры вводить
Hi! Just want to ask for updates on this
Since this is almost 1 year ago, just want to ask if it pass the test of time? Is this still arcurate and is the battery not draining too fast?
thank u!
yes is working no problem and battery is ok steal the same
Did I hear you say you can programme the speedometer to miles instead of km?
yes, you can
Hey bro where do you get this from
This was very accurate for me and worked great, I used your video as a guide for the installation. Do you know how to change the speed from Miles to KM?
in the initial setup, remove the battery and start a new configuration, the first thing that will come out is the km/h option
How does one know the distance of the magnetic pickup from the center of the wheel
@@rodneyemmerich8828 i just put it at the place where the two spokes cross. Then I mount the wireless transmitter as close to the magnet without hitting it. Zip tie is your friend.
Thanks! Such a good tutorial! Soon installing one on my bike
I have 27.5 , 2.10 wheels. What’s the code?
I have looked everywhere to see how to change the km/h to mph on the speedometer. No luck... Comments, Please.
remove and reinstall the battery and it will reset all values back to zero, at which point you can select from km/h to mph
What bike is he using in this vid?
Wonderfull review and explanation
Thanks man,please SUBSCRIBE and share if possible
@@TechGuruAndrew have done mate
How many move to set it in miles ?
2 clicks
Tony S which 2 clicks? As I can't find this setting
I don’t understand what’s wrong with mine. It works but when I go full speed it only says 0.2MPH
Change it to kilometers
Is it laggy or not?
Will I get it to fit my electric scooter
Could you please make a Vedeo of Gaint neos pro speedometer?
Where can i buy it? :D
Amazon
can i turn it off and on
Can you set the units to imperial units?
Yes , you can
@@tonykuv how
@@erikchristysalek9007 follow the instructions of the product
@@erikchristysalek9007 took me 2 moves
I got it!! Have to push S first (once) and then M (once) right after putting the battery in. While KM is blinking. Thank you much!
7:30 MXS 93 km/h? 93 m/h? Both to fast for a bike driver, or not? You think this is normal, TechGuru Andrew? Why do you not would like to explain this?
probably he moved the magnet near the sensor with his hands to see if it works.
Thanks for the tip about the mph. I missed it at first and was really struggling. Very helpful.
How to reset trip km? (DST)
Thanks for the video its just the job for a technophobe like myself, I could not get it to read in MPH until I watched it.
You welcome please subscribe
Where was that at John? I missed it. Thanks
Jouncyg It's the very first option as soo as the battery goes in...km will be flashing so you select S to change it to mph
Writing time????or riding time!!!!!!!!!!!!
7.5 m
How to setting wheel set 16?
measure the circumference of the wheel and write it in the corresponding option
Mine stopped showing speed and the signal bars while driving. Checked the batteries of both computer and sensor which are good so not sure what the problem could be. Anyone else have this issue? Computer still good for time but stays on 0.0 km/h
That' my problem too. Everything is working except for the 0.0 km/h. Getting fustrated
@@abets.1176 Figured out my problem after opening up the sensor. It seems the transmitter coil wiring broke loose off the board. The wiring feels really fragile and delicate and way to small to repair myself. Perhaps it isn't really up to handling the shock of mtb riding. I guess you get what you pay for
hi is this waterproof?
water resistant
Is it accurate?
yes
Hey my friend do you know how to turn off the spedometor when i am not ride the bike.There is any option or just turn off automatically and shows off only time
i leave it on and it goes to time only
@@TechGuruAndrew Thank you for advice i install it the way you say it because i left the paper with construction in garden and my husky makes it 1000 pieces .
@@arsenvelaj3409 oh love husky
@@TechGuruAndrew Thank you very much for help and video i also love them have 2 siberians husky 3 and 6 years old
I would like to have a dog but i don't have time ,is very important to give time your dog and not just to have a dog. Maybe in future :)
hi, does it tell you when the battery is low?
Price of a big Mac meal!
How do I switch km to mi??
Bhai kitne ka hai
Thank you for your video, it helps me a lot
excellent thank you
You welcome
How do I switch switch km to mi. I'm American
Listening to you talking is making my brain melt, i am sorry
thx man
LEGEND
Does it measure MPH?
Yes , it does
It's the very first option as soo as the battery goes in...km will be flashing so you select S to change it to mph
U lost me with "its from China"
Wow.