As much as I hate friction shocks (don't we all!)... these things are little rippers! And they just keep on going, even when the motor is as hot as the Sun!
I’ll be watching part 2 tonight lol. My kids have numbed me to the rubber chicken sound (I’ve been known to annoy the wife with one myself) so it should be a fun one lol
Did any of the escs get much hotter than the motor, on any of these suchiyu rc's (except for the trophy truck one which I have, and am asking cuz mine gets much hotter than motor)?
Not sure if they got hotter than the motor or not, but possibly. It t was hot enough to burn my hand there on 3s. It was warm out and I was going hard for a good 15 minutes.
Makes sense! For the tire size and light weightedness of the car, it still feels good on the bottom end. Pretty awesome! I guess the best solution would be the bigger motor and taller gears?
This Chinese company has pretty good support, they sent my package express and basically ate the shipping cost difference. I ordered the Gantry Pro and the thing is a beast, takes a beating and keeps rolling.
I’m picking up what your puttin down brother I get a kick out of the bouncing and sometimes the flaws make it funny! You had a good run great job! Suchiyu or whatever it is, they’re alright! Tear them tires a new one haha
Right it’s funny and fun to keep it in control. A bit more challenging I guess. Still overall prefer smoothness though 😂 Jumping is a different story. lol I want smooth every time all the time! 😃
Great job! Yes 100% guarantee installing a 2845 is what it needs i have a surpass 2845 5900kv on the wsy for mine..i am going with 20t pinion...on 2s it should be as fast as it was here on 3s...i will add aluminium heat sink to motor...For those that want to run the hell out of it i would recommend adding a fan for motor and one for esc...i love the oil shocks i added to mine..they needed some retro fitting and slight mod to get car to sit a bit lower,but they work and look awesome...i also think if someone could find a 2845 6500kv to 7500 kv using stock 18t or 20t it would be mega fast top end...i hope theres a few guys out there that there interested in seeing what this is capable of... heres a tip..order a new motor mount and mod .6 pin either 18t or 20t since you may like me find it impossible to loosen the motor screws due to them using red lock tite...yes if i used a torch i could have,but i did not want to cook the motor...my soldering iron did not work..Good luck this car is a blast to drive..extremely well engineered in my opinion...it can go fast and straight also which is a huge plus in my opinion..also dont forget controller uses 3 AA batts and also has better range than mjx controller,plus it has dual rate steering as well...😊 9:05
Great review! I was hoping you'd get to this one too. If you've got spare MJX Hypergo parts laying around with the red can brushless motor it's a tiny bit smaller than the green SCY one but is 4200KV instead of 4000KV like the green one. might be the ticket for this road car.
@@DerbyCityRC Sweet! I believe it takes a different sized screw at the motor mount. Possibly m3. But the shaft is the same size so pinions are cross compatible. I look forward to seeing what you do with the scy street car... maybe 100mph on a budget? 😀
YES! I had one of these on my lists, then had second thoughts based on the first half of Tomley's review, then came back around by the end of his review. hahaha This just solidifies it in my mind that it's time to order one. "3s is gonna cook this thing. We're gonna do it anyway." 😂😂
Yep, you made it look fun and durable. I watched another video on this car… I didn’t even finish watching the other video bro. As usual I have to go and look at at one now 😆. Great little vid
You abd Aaron have both nade this look like a fun car! I may have to get me one just to try and make a small speed run car! When are you going to have a video of it with a larger motor in it? Later today maybe?
I agree! I believe that’s what I’m gonna do too, definitely won’t be today lol. I’ve got another cool thing planned first and another and then…. Oh geez so many projects and reviews in the works! 😂
Just got a brand new one, but this was recorded when I still had my old speedometer: amzn.to/3RLiJQM This is my new one which uses an app on your phone. Likely more accurate and quicker to catch a high speed: amzn.to/45LA15S Banggood has them both for cheaper
@@DerbyCityRC Awsome, thanks! I'm curious to see what I can get out of my 6S Kagama. Seems rediculously fast visually but might just be because it's so huge.
Apparently according to rc crazy that know these cars inside and out i should have used a 22t..Discipline rc used a 20t,but his must have been steel vs a cheap aluminium ...have a couple of 22t s on the way!😊
Update! Yesterday i tested my upgraded sg race car...2845 5900 kv..stripped the 20t aluminum pinon in 45 seconds..everything seemed perfect mesh wise...i dont think its steel spur gear likes aluminum..anyway i ordered a stock 18t and another motor mount since even blue lock tight forced me to strip one of hex motor mount screws 😅😅
HUGE SUCCESS! RIPS ON 2S 2000 LION from my hypergo drift truck..did 20 speed runs etc...same speed as stock motor on 3s 1000 lipo..i installed surpass hobby 22t alloy pinion on surpass 2845 5900kv...also added heat sink to motor..esc and motor were pretty warm,but not hot..on a 3s lipo with this setup you will get mid 50s to 60 plus..the reason not sure is because the esc may hold it back..just not sure...with a 60 amp esc i bet my car would be over 70mph with this motor..best to just order mount,motorand pinion off ali..takes a week for me in usa..Oh and the power is ridiculous.😊
look just like the Rlaarlo R/C car got to go pick that up so fast I think all R/C car's & R/C Truck's should come with front lights and back lights that will be cool.!!!💯💯😎😎🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
reason why the battery wasnt empty after the run battery cant give enough amps so voltage drops to low and hits lvc same isseu i have with genace 5000mah 3s 60c in my outcast v2.5
You’re probably right. I didn’t try to shut off and back on or anything. Happened to my outcast 4s one time and was pretty bad on my Mojave 4s at first too, but it was super cold (atleast for the Mojave) and once it warmed up it was fine. I do think I heard that there is a software fix for that.
I responded to your other comment about it 😃 I did just review it two videos before this. B it there is major speculation on if it is the “final product” or not. There might be an even newer version coming soon. We don’t know. Lol
This specific brand sells parts on Suchiyu.com and also rccarsparts.com, but they aren’t always there right away. Many of the parts will share with other cars in this line.
He still mentioned the good points about it, but that’s why it’s always good to check out a few videos on a car as we can all have different experiences. I definitely like this one too!! Thanks dude!!
As much as I hate friction shocks (don't we all!)... these things are little rippers! And they just keep on going, even when the motor is as hot as the Sun!
I agree dude! Put a grate on this motor and cook an egg or two!! 🍳😆
@@DerbyCityRC I guess my next 'Science' video needs some heat haha
I’ll be watching part 2 tonight lol.
My kids have numbed me to the rubber chicken sound (I’ve been known to annoy the wife with one myself) so it should be a fun one lol
@@DerbyCityRC haha… enjoy 👌
Guys sry to interrupt big Bros, I was just wondering what car would you guys recommend under 100$ for indoor mainly and use a 2s 18650cells
I agree 💯% These are amazing. Can't wait to see them build a 1/10 😎🤘
Ya the rocket ship you made with yours was epic!! Me too, hopefully they knock it outta the park!!!
@@DerbyCityRC I was gonna comment about his rocket LOL.
Good thing I read this comment!
@Multi-Skill-Bill haha! Good thing!! 😆
I thought they wur 1/10th
No these are 1/14 or 1/16, I can’t remember. 1/10 would be much bigger. Rlaarlo has a similar car that looks like this and is 1/10.
Looks like a mini ak917. I like it
It does indeed!! 😃
It fooled me until I opened the video. The 917 didn't go straight and the 2nd model really cleaned that up. Good cars to have fun with.
@HallOfFamer330 those definitely look decent!
It's plenty colorful. I like how it handles and floats over rocks. Very nice!
Yes I like it but I think I would like the blue better! Thanks!! 😊
Did any of the escs get much hotter than the motor, on any of these suchiyu rc's (except for the trophy truck one which I have, and am asking cuz mine gets much hotter than motor)?
Not sure if they got hotter than the motor or not, but possibly. It t was hot enough to burn my hand there on 3s. It was warm out and I was going hard for a good 15 minutes.
It looks like a legit 917 Porsche body
It does! They scaled this pretty nicely!
2440 brushless motors wind high for great top end power, but don’t have the bottom end of the bigger 3660 ..
Makes sense! For the tire size and light weightedness of the car, it still feels good on the bottom end. Pretty awesome! I guess the best solution would be the bigger motor and taller gears?
This Chinese company has pretty good support, they sent my package express and basically ate the shipping cost difference. I ordered the Gantry Pro and the thing is a beast, takes a beating and keeps rolling.
I’m picking up what your puttin down brother I get a kick out of the bouncing and sometimes the flaws make it funny! You had a good run great job! Suchiyu or whatever it is, they’re alright! Tear them tires a new one haha
Right it’s funny and fun to keep it in control. A bit more challenging I guess. Still overall prefer smoothness though 😂
Jumping is a different story. lol I want smooth every time all the time! 😃
Great job! Yes 100% guarantee installing a 2845 is what it needs i have a surpass 2845 5900kv on the wsy for mine..i am going with 20t pinion...on 2s it should be as fast as it was here on 3s...i will add aluminium heat sink to motor...For those that want to run the hell out of it i would recommend adding a fan for motor and one for esc...i love the oil shocks i added to mine..they needed some retro fitting and slight mod to get car to sit a bit lower,but they work and look awesome...i also think if someone could find a 2845 6500kv to 7500 kv using stock 18t or 20t it would be mega fast top end...i hope theres a few guys out there that there interested in seeing what this is capable of... heres a tip..order a new motor mount and mod .6 pin either 18t or 20t since you may like me find it impossible to loosen the motor screws due to them using red lock tite...yes if i used a torch i could have,but i did not want to cook the motor...my soldering iron did not work..Good luck this car is a blast to drive..extremely well engineered in my opinion...it can go fast and straight also which is a huge plus in my opinion..also dont forget controller uses 3 AA batts and also has better range than mjx controller,plus it has dual rate steering as well...😊 9:05
Awesome info again dude! I’m gonna try to find a high end motor!
Getting a Mikey from tmnt vibe from that livery
It’s been too long and can’t really remember but i have a blurry image of it. Haven’t seen any of the newer ones yet lol
Great review! I was hoping you'd get to this one too. If you've got spare MJX Hypergo parts laying around with the red can brushless motor it's a tiny bit smaller than the green SCY one but is 4200KV instead of 4000KV like the green one. might be the ticket for this road car.
I do have one of those laying around waiting for a recipient …hmmmmmmm.
Not sure what I’m gonna use yet. Thanks!!
@@DerbyCityRC
Sweet! I believe it takes a different sized screw at the motor mount. Possibly m3. But the shaft is the same size so pinions are cross compatible. I look forward to seeing what you do with the scy street car... maybe 100mph on a budget? 😀
@froshmasta 🤫 😂
100% rather pay a few extra bucks for oil shocks....
I getcha!!
Me too! 👍
YES! I had one of these on my lists, then had second thoughts based on the first half of Tomley's review, then came back around by the end of his review. hahaha This just solidifies it in my mind that it's time to order one.
"3s is gonna cook this thing. We're gonna do it anyway." 😂😂
Yup I hear ya! The shocks are a shortcoming, but one that can be overlooked on this car in my opinion. 😂🤣
did you use 3S battery with stock parts? or you did some mod for using 3S?
Don’t even have a road car but you are inspiring me! Great overview and rips!!!
This would be a good first one in my opinion. Be inspired! 😆
Nice. What 3s battery did you use?
Yep, you made it look fun and durable. I watched another video on this car… I didn’t even finish watching the other video bro. As usual I have to go and look at at one now 😆. Great little vid
Thanks!! It really was!! Thanks dude!! 😃
while I am not a road car fan, I love your vids. Thanks
Thanks!! 😊
I really enjoy your videos!
So glad to hear that!! 😊
Looks like a good beginner RC
Good beginner car or good car for anyone to rip around!
Always good reviews. Have a good 4 th July. Bro
Thanks dude! Always appreciate your comments!!
Thanks for the video just doing my part to spread your stuff!
Super appreciate you bro!! 😊
Not sure if it looks like the Porsche or the Rlaarlo lol either way looks like a fun rc for sure
Well this and the rlaarlo are both based off the Porsche Le Mans race car 😃
I’ve seen that motor get waaaaarrrrrrrm
Could cook eggs on that motor.. 😂
@@JP-qq2kn future video right there
It definitely does lol
🍳
😂😆
You abd Aaron have both nade this look like a fun car! I may have to get me one just to try and make a small speed run car! When are you going to have a video of it with a larger motor in it? Later today maybe?
I agree! I believe that’s what I’m gonna do too, definitely won’t be today lol. I’ve got another cool thing planned first and another and then…. Oh geez so many projects and reviews in the works! 😂
Pretty cool little fart! Looks like it handles pretty good too for no drift assist 😁
💨 thanks! It’s pretty darn good! 😊
i bet if you ranit without the body that motor would be a lot cooler or rigged up soe kind of intake with a breather in the back to alliw airflow.
I’m sure that would help!!
Which system do you use to record the speed?
Just got a brand new one, but this was recorded when I still had my old speedometer: amzn.to/3RLiJQM
This is my new one which uses an app on your phone. Likely more accurate and quicker to catch a high speed: amzn.to/45LA15S
Banggood has them both for cheaper
@@DerbyCityRC Awsome, thanks! I'm curious to see what I can get out of my 6S Kagama. Seems rediculously fast visually but might just be because it's so huge.
@DOUGandNIKI they definitely look faster when they’re bigger! 😃
@@DOUGandNIKI I got 62 out of mine I think it had more in it the tires turn to pizza cutters makes it hard to steer
@L2theWcarscoffeelife nice! Gotta figure out which tires to use!
If Derby says the shocks are ok then the shocks are fine. 10 out of 10. Would purchase
Thanks buddy! 😊
Apparently according to rc crazy that know these cars inside and out i should have used a 22t..Discipline rc used a 20t,but his must have been steel vs a cheap aluminium ...have a couple of 22t s on the way!😊
YESSS NEW VID ❤❤
😃
Not gonna lie, I want one
I was pleasantly surprised how much I enjoyed this! Already knew I liked this brand but still!
Please i beg you to review the laegendary legend 🙏👍
Nice video
I’ve sent them a message so now we will see what happens. 😜
Update! Yesterday i tested my upgraded sg race car...2845 5900 kv..stripped the 20t aluminum pinon in 45 seconds..everything seemed perfect mesh wise...i dont think its steel spur gear likes aluminum..anyway i ordered a stock 18t and another motor mount since even blue lock tight forced me to strip one of hex motor mount screws 😅😅
Ouch!! That’s crazy lol well let me know how the next attempt goes 😂
Also it will be 40 mph on stock 2s lion if my math is correct and it works.😅
HUGE SUCCESS! RIPS ON 2S 2000 LION from my hypergo drift truck..did 20 speed runs etc...same speed as stock motor on 3s 1000 lipo..i installed surpass hobby 22t alloy pinion on surpass 2845 5900kv...also added heat sink to motor..esc and motor were pretty warm,but not hot..on a 3s lipo with this setup you will get mid 50s to 60 plus..the reason not sure is because the esc may hold it back..just not sure...with a 60 amp esc i bet my car would be over 70mph with this motor..best to just order mount,motorand pinion off ali..takes a week for me in usa..Oh and the power is ridiculous.😊
Ps..once you have new motor on mount a motor swap can be done in a couple of minutes..very easy to work on.
look just like the Rlaarlo R/C car got to go pick that up so fast I think all R/C car's & R/C Truck's should come with front lights and back lights that will be cool.!!!💯💯😎😎🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
Yup it’s based off the same car the rlaarlo is I believe!!
any plans on reviewing the mojave grom?
Who dosent?
Not as of yet, but we will see!
reason why the battery wasnt empty after the run
battery cant give enough amps so voltage drops to low and hits lvc
same isseu i have with genace 5000mah 3s 60c in my outcast v2.5
You’re probably right. I didn’t try to shut off and back on or anything. Happened to my outcast 4s one time and was pretty bad on my Mojave 4s at first too, but it was super cold (atleast for the Mojave) and once it warmed up it was fine. I do think I heard that there is a software fix for that.
Exactly dude, a low c rating will do that
@@DerbyCityRC there is something in the software that you can change but it adds risk
yea lipo's are slow in cold with discharging
@@jamesreilly563 60c is not low
in my case it hits lvc arround 30%
@politie_jip112 good to know!
Put some off road tires on it
Not a terrible idea!!
Please review the ANGRY SNAIL!! I think I want one, if either you or Tomley give at least 3.75 stars lol
I responded to your other comment about it 😃 I did just review it two videos before this. B it there is major speculation on if it is the “final product” or not. There might be an even newer version coming soon. We don’t know. Lol
@@DerbyCityRC awesome, it looks awesome!!
@@DerbyCityRC did I miss the video review on it?
@@jhrubicon1470 I guess so lol. It’s there! 😃
@@DerbyCityRC I couldn't find a video on the Mjx H8h V2 Foc 1/8th. I know you did the rlaarlo but I couldn't find the H8h.
can you get parts
This specific brand sells parts on Suchiyu.com and also rccarsparts.com, but they aren’t always there right away. Many of the parts will share with other cars in this line.
Can you fry a egg on it?
Almost guaranteed lol
Tomley talked major s**t on that car but I totally disagree. I like it. Great review slugger.
He still mentioned the good points about it, but that’s why it’s always good to check out a few videos on a car as we can all have different experiences. I definitely like this one too!! Thanks dude!!
the rlarrlo one is 10x better
Oh I bet it is! This one is quite a bit smaller and cheaper. I definitely want to get the rlaarlo one soon!
You should on purposely run on 4s and see if it catches on fire 😂
😆 I’m gonna try to make it ultra fast first 😂
@@DerbyCityRC 🤣