Spot on again i know the guy below has given a negative response to it but i couldn't disagree more with it i would much rather watch a tutorial video from a trusted company and proven accomplished angler thanks John
Going to attempt this today but I need to watch this again as I missed how to do the D lol wish me luck 😅 must be so satisfying when catching fish on a made chod rig
@@MainlineBaitsCarpFishingTV Great vid as always. Is there any benefit to tying the floss this way, as opposed to pulling it through the boilie? Thanks
Hi Ghost I only got back into carp fishing about a year ago after several years off and there’s so much different information out there now. I went through a phase of getting really confused with rigs and tied up the slip D as it looked great. Came back more often than not with the D and hookbait tangled around the hook, never used it again. Hope this saves you some time, a blowback rig, D rig or German rig will largely do the same thing I believe. Good luck
When using beads on the chod rig, whether that being on your main line with a piece of silicone of if you’re using leader …. How do you know where to put the top bead of you’re unsure of the lake bed? Thanks everyone 👍🏼
I just be a little bit over generous on the top Bead just to be certain it’s sitting on the weed ya can’t over do it has it will settle itself hope this helps
A great tutorial video as always, just wondering would it make any difference if I was to feed the bait floss through the pop-up with a boilie needle then blob it off, like you did in the spinner rig tutorial? Just feels alot easier and quicker that way.
Hi if you used a micro ring swivel on the 'D' section and not a rig ring then yes you could. Ideally when using the floss blob method you want the pop-up pulled onto the micro swivel for secure hold of the hookbait.
Great video thank you. The only thing is if you are using a safety heli system and you drop the lead then snap off. How will the hook length run up the leader ? I had this happen to me and was like thank god I used a helisafe then thought how is the fish going to get rid of the leader ? I now use naked chod if I need to dump the lead
Hi Dash, the top bead needs to be able to come free under pressure to allow the hook link to slide off in the event of a break off - we use the 'no-trace' beads from Korda which have a side split to ensure this happens easily.
@@MainlineBaitsCarpFishingTV thanks for replying , do you think the hook length will run up the leader especially lead core if it’s next to the buffer bead without the weight of a lead ? I just can’t see how it can with the leader hanging down unless the heli clip catches on to something.
Hi Jack, mainly because that's how I've always done it - it also means you don't pierce the pop-up, potentially letting water to get in (over long periods of time) and effect the buoyancy.
Yes great for mud - but you have to fish on a heli set up. If you use this on a lead clip set up in deep mud/silt, the lead will drag this under the silt with it.
I’ve seen with rig tutorials for the hinge stuff rig people use a whipping knot instead of the knotless knot. As the chod rig is the same section as the Hinge Stiff would you use a whipping knot?
Yes you could, I personally prefer the Knotless Knot as it fills the eye with two passes of the mono, which I feel prevents twist and rubbing of the mono on the eye while playing carp.
In that case I'd probably go for a 'naked' set-up. So having the hooklink running on the main line without any kind of leader using the Naked Chod Safety System (all the correct beads and tubes etc) from Korda.
Great video! How would you attach the chod rig to the lead core if the lead core is ready made up? I'm new to this and was given loads of ready made rigs and can't for the life of me figure out how he attached them 🤦🤦
I struggle when I comes to treading the small section that makes the D as there’s already 2 loads of line running through the eye..? I use size 6 chod hooks aswel. Any advise?
Thanks Chris, yep the sleeve ideally needs to be the other way around not that it will be detrimental this way just not ideal - the problems of concentrating too much on filming the rig not tying it! Doh!
I always have trouble with the D section fitting back through the eye after the knotless knot. I use size 6 krank choddys and 25lb mouth trap. Any advice?
@@MainlineBaitsCarpFishingTV just tried it. Works great. Even the way you tie the knotless knot makes it neater and tighter. Thanks a lot!!! Can finally tie my own now!!
Hi John, I saw in one of the comments where you said one can still use a micro ring swivel. How deep do you push it inside the pop-up to ensure it doesn't interfere with the mechanics of the rig? Will a bait screw still achieve the same results here?
Tying the bait on just helps pop-up remain buoyant for longer as piercing the bait allows water into the bait, which is fine in most cases - John is just in the habit of tying on pop-ups with this rig.
Fantastic yet another video of how to tie a chord rig! The other 25'000 videos of how to tie this rig were really feeling lonely without this definitive version!! It might be more helpful to anglers to give them a how to tie a side hooked rig or the original hair rig than yet another one of these.
Hi Gary, the first how to tie the Chod Rig video on our channel and part of a conclusive series of 'how to' video's that wouldn't be complete without covering this presentation - sorry it wasn't for you, but thank you for taking the time to comment. Good luck on the bank!
On the part showing how to tie the rig when attaching the swivel you say its a number 8 swivel not size 11 chod swivel.. could confuse foke thats all.. Nice videos tho 👌 👏
Im sorry, I disagree with all the comments. I think the rig is very shoddy looking and you've over complicated it with the bait floss. Why on earth didnt you just stick a baiting needle through your popup, pull the baiting floss through the popup with the baiting needle and then blob the ends of the floss to seal it? This gives the bait far better natural movement near the hook and a far more presentable rig. I suggest people take a look t a few more video's of tying a chord rig before taking the advice from this one, its honestly not that good. Sorry, just my opinion.
I like the rig, but the thing about throwing a led every time? I know why but do you guys lose so many fish that you need to do that? I have been fishing carps since 1997 and have never been so stupid as to waste my money on that.
I’m just getting back into carp fishing after a 20 year hiatus and this is exactly what I needed to watch. Thanks very much, fantastic video
Glad I could help!
Blimmey thought i was the only person still tying their baits like this😊
Easily the best tutorial videos out there by miles. Fantastic
Thanks - really appreciate comments like this!
YO THAT PUTTY TO FLOSS TRANSITION WAS ACTUALLY INSANE! I had to rewatch it like 10 times
Spot on again i know the guy below has given a negative response to it but i couldn't disagree more with it i would much rather watch a tutorial video from a trusted company and proven accomplished angler thanks John
No worries Luke - glad you enjoyed this!
Going to attempt this today but I need to watch this again as I missed how to do the D lol wish me luck 😅 must be so satisfying when catching fish on a made chod rig
Good Luck!
Another fantastic video thank you. Your page is my go to for any advice/tips.
Your vids are the best on RUclips 👍
Glad you like them!
This is awesome John, thanks!! I’ve never used floss in that way before. Always pulled it through the pop up
Glad to help!
@@MainlineBaitsCarpFishingTV Great vid as always. Is there any benefit to tying the floss this way, as opposed to pulling it through the boilie? Thanks
Never mind. Answered below. possible water retention. Thanks
These are really good vids that help me understand could you do a slip d and explain why you would use this rig as I don’t know
You would use a chod over something like heavy silt or weed, so the rig would present itself over the top without sinking into it.
Thanks, we will be covering lots of different presentations.
Hi Ghost I only got back into carp fishing about a year ago after several years off and there’s so much different information out there now. I went through a phase of getting really confused with rigs and tied up the slip D as it looked great. Came back more often than not with the D and hookbait tangled around the hook, never used it again. Hope this saves you some time, a blowback rig, D rig or German rig will largely do the same thing I believe. Good luck
Great video! Been fishing with a chod rig for quite a while now and it works great!
Thanks - glad you liked it!
Muy bueno 👌 from Argentina 🇦🇷
Thanks David!
I'm hooked on these vids and you answer question luv it
No worries we're here to help!
Great stuff guys very clear and concise keep'em coming.
Thanks, will do!
Cheers mate watched and taken in
No probs Dean!
As usual makes it nice and easy to follow.
Thanks Jim glad you're enjoying these videos!
A good tip is to use a bait screw. That way you can switch popups quicker and easier
Ruins the buyoncy
When using beads on the chod rig, whether that being on your main line with a piece of silicone of if you’re using leader …. How do you know where to put the top bead of you’re unsure of the lake bed?
Thanks everyone 👍🏼
I just be a little bit over generous on the top Bead just to be certain it’s sitting on the weed ya can’t over do it has it will settle itself hope this helps
Great vid, when you see two beads the same like on most sets ups can you still move the first one higher?
Yes you can!
Love the videos they teach you a lot and help out quite a bit my favourite bait is krill and bloodworm
Glad you're enjoying the videos Paul!
A great tutorial video as always, just wondering would it make any difference if I was to feed the bait floss through the pop-up with a boilie needle then blob it off, like you did in the spinner rig tutorial? Just feels alot easier and quicker that way.
Hi if you used a micro ring swivel on the 'D' section and not a rig ring then yes you could. Ideally when using the floss blob method you want the pop-up pulled onto the micro swivel for secure hold of the hookbait.
Great video could you use a bait screw instead of a ring????
Hi yes you can.
Great video thank you. The only thing is if you are using a safety heli system and you drop the lead then snap off. How will the hook length run up the leader ? I had this happen to me and was like thank god I used a helisafe then thought how is the fish going to get rid of the leader ? I now use naked chod if I need to dump the lead
Hi Dash, the top bead needs to be able to come free under pressure to allow the hook link to slide off in the event of a break off - we use the 'no-trace' beads from Korda which have a side split to ensure this happens easily.
@@MainlineBaitsCarpFishingTV thanks for replying , do you think the hook length will run up the leader especially lead core if it’s next to the buffer bead without the weight of a lead ? I just can’t see how it can with the leader hanging down unless the heli clip catches on to something.
Another great vid thanks , is it for buoyancy your looping the floss and not piercing the boilie ?
Hi, yes, by not piercing the pop-up it won't absorb water (as quickly) and remain buoyant for the longer periods.
Great video John 👍🏻
Thanks Steve!
Brilliant video thanks
No worries Gary!
How come you don't put the bait floff through the pop up? Luv ur vids
Hi Jack, mainly because that's how I've always done it - it also means you don't pierce the pop-up, potentially letting water to get in (over long periods of time) and effect the buoyancy.
@@MainlineBaitsCarpFishingTV thank you very much always rely on ur baits👍
Hello Mainline, I am loving the how to vids but when it comes to the chod rig I find it a pain to do the way you have shown so tie it multi rig style.
Thats okay Mark - it can always be adapted to your style - glad you're enjoying the videos!
Alot of fisheries have bans on leaders, can you do this same kind of set up with your mainline instead of a leader?
Yes you can, I'd recommend the Korda Naked Chod system that has really well designed buffer beads.
I thread my bait floss through the baits. I don’t trust the hoops I’ve had baits come off before
They must be super-tight.
Normally the bait swells a bit which helps it stay on
With the attachment of the boilie, can it be done using a normal type hair, or does it actually need the filament tied around the outside of it?
Great explanation. Is that system good for mud, especially is deep and soft or is better solution hely sistem? Thx
Yes, it is.
Yes great for mud - but you have to fish on a heli set up. If you use this on a lead clip set up in deep mud/silt, the lead will drag this under the silt with it.
I’ve seen with rig tutorials for the hinge stuff rig people use a whipping knot instead of the knotless knot.
As the chod rig is the same section as the Hinge Stiff would you use a whipping knot?
Yes you could, I personally prefer the Knotless Knot as it fills the eye with two passes of the mono, which I feel prevents twist and rubbing of the mono on the eye while playing carp.
Fantastic video mate. Thanks
Thanks Andrew - glad you enjoyed it!
can you use a bait screw instead of bait floss?
Yes you could Jay.
Yes I'm going to use a bait screw instead of floss
If you have a fixed lead and saftey stoppers at the top, will this cause hook pulls with the lead being so close to the hook?
can i use a bait screw instead or micro ring swivvel dont know how i feel about the bait floss being around the bait like that
Yes you can.
Any tips for using the chod rig with tubing as there’s leader bans on my water
In that case I'd probably go for a 'naked' set-up. So having the hooklink running on the main line without any kind of leader using the Naked Chod Safety System (all the correct beads and tubes etc) from Korda.
Would it work if you mount the pop up on a screw not floss??
Yes it would.
Great video! How would you attach the chod rig to the lead core if the lead core is ready made up?
I'm new to this and was given loads of ready made rigs and can't for the life of me figure out how he attached them 🤦🤦
Can you really get 25lb mouthtrap through a size 6 chod hook 3 times. Or did you use 20lb when tying this
Haha yes you can, but it is a tight fit - cutting the end of the Mouthtrap at a sharp angle and keeping it taught while tying is key.
Can you overweight pop ups if fishing over chod or does it need to always need to sink slowly?
I struggle when I comes to treading the small section that makes the D as there’s already 2 loads of line running through the eye..? I use size 6 chod hooks aswel. Any advise?
Cutting the tag end at an angle so it has more of a sharp point can help.
Blobb it after its gone through the eye😂
Can u use 2 bbs instead of putty ?
Much better to use putty with this rig.
Great, use a background which means you can see naff all
Super explanation, but I still have a Question: Why is the microphone bigger than your head??
Only thing i would do different is use a bait screw
Thats an option.
What do I do if I the mouth trap wont go through the eye of the hook when I'm making the d section I'm using size 6 chod hooks
If you cut the Mouthtrap at an angle so the tag end is pointed it should go through if not you can use a whipping knot also known as a Snail Knot.
@@MainlineBaitsCarpFishingTV ok thanks
Great vid,but you have the sleave the wrong way round, the taper should be facing the lead🤔🤔
Thanks Chris, yep the sleeve ideally needs to be the other way around not that it will be detrimental this way just not ideal - the problems of concentrating too much on filming the rig not tying it! Doh!
Someone please tell me how the 3rd time going through the hook eye fits? Mine won’t go through just after using the small rig ring
Hi, try cutting the tag end at an angle so its sharp,
@@MainlineBaitsCarpFishingTV worked thanks alot
Size 11 or size 8 ring swivel?
What Leader are you using?
Thats the Leadcore from Korda.
@@MainlineBaitsCarpFishingTV Thank you!
Of course it is . There only allowed to use korda in there vids . As the goo boys only fish with mainline bait
I always have trouble with the D section fitting back through the eye after the knotless knot. I use size 6 krank choddys and 25lb mouth trap. Any advice?
It can be a tight fit but should be okay - cutting the tag end diagonally so its arrow-like can help.
@@MainlineBaitsCarpFishingTV just tried it. Works great. Even the way you tie the knotless knot makes it neater and tighter. Thanks a lot!!! Can finally tie my own now!!
@@andymcmillan9260 Great - glad we could help Andy!
What can you use instead of Chod filament?
Any thing with good memory will work but not an elephant
Let’s see if this works on Wednesday 🙏🏼🤞🏻👊🏻❤️
Good luck!
Hi John, I saw in one of the comments where you said one can still use a micro ring swivel. How deep do you push it inside the pop-up to ensure it doesn't interfere with the mechanics of the rig? Will a bait screw still achieve the same results here?
I'll put the whole of the micro swivel in the pop-up leaving the ring to move freely - yep you can also use a bait screw.
Why not use a micro swivel?
darker background will help show the line better.
Yep - think we're going to settle on the dark blue used in the Spinner Rig video.
Why tie the bait on rather than pulling the floss through with a needle?
Tying the bait on just helps pop-up remain buoyant for longer as piercing the bait allows water into the bait, which is fine in most cases - John is just in the habit of tying on pop-ups with this rig.
Fantastic yet another video of how to tie a chord rig! The other 25'000 videos of how to tie this rig were really feeling lonely without this definitive version!! It might be more helpful to anglers to give them a how to tie a side hooked rig or the original hair rig than yet another one of these.
Hi Gary, the first how to tie the Chod Rig video on our channel and part of a conclusive series of 'how to' video's that wouldn't be complete without covering this presentation - sorry it wasn't for you, but thank you for taking the time to comment. Good luck on the bank!
"Create a slipknot" alright im just gonna push the mouthtrap into myyyyyyyyyyy EEEEEEEEYYYEEEEEEEEEEEE!!!!!!!!!!!
Noooooooooo!!!!!
@@MainlineBaitsCarpFishingTV you are getting this all wrong. The appropriate answer would have been "its the only thing that slowly stops the ache"
@@MainlineBaitsCarpFishingTV listen to Duality by Slipknot and @ me again later😅
@@theblobfish9614 We get it!
@@MainlineBaitsCarpFishingTV i have said nothing👍❤️
On the part showing how to tie the rig when attaching the swivel you say its a number 8 swivel not size 11 chod swivel.. could confuse foke thats all.. Nice videos tho 👌 👏
Ah - sorry about that. Yeah should say size 11.
Im sorry, I disagree with all the comments. I think the rig is very shoddy looking and you've over complicated it with the bait floss. Why on earth didnt you just stick a baiting needle through your popup, pull the baiting floss through the popup with the baiting needle and then blob the ends of the floss to seal it? This gives the bait far better natural movement near the hook and a far more presentable rig.
I suggest people take a look t a few more video's of tying a chord rig before taking the advice from this one, its honestly not that good. Sorry, just my opinion.
that background
👏👏👏👏👏👍
Thanks!
Probably better with a bait screw imo
I guess some people will find that easier - just always tied it this way...
😂😂😂 we cant see the line only see the hook. Blends in with bck ground.
Dont use lead core leader . Its to abrasive on the fish when playing .. Fish are getting injured by lead core leaders
Why so complicated on connection your bait!!
Stupidly itself. Put it against a darker background and the we can see the line
I lost a lot of fish with this method not the best choice
I like the rig, but the thing about throwing a led every time? I know why but do you guys lose so many fish that you need to do that? I have been fishing carps since 1997 and have never been so stupid as to waste my money on that.