Fixing The Yamaha Raptor 660r...Good Thing I Checked This!
HTML-код
- Опубликовано: 20 окт 2020
- I fix up everything wrong on the Yamaha Raptor 660r. I end up finding out a major problem it was having...Good thing I check this out! #Yamaha #Raptor, #Problems,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
►FORUM: 2vintagerider.com/community/
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
►►► ADD ME ON ALL SOCIAL MEDIA ◄◄◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.
The Yamaha Raptor still has that noise! What could it be?
New project starting next video! It's a change up from the quads!
Please SUBSCRIBE an LIKE the video if you enjoyed! It really helps me out a lot!
Thank you for all the support!
I saw you got a three wheeler I think nice keep up the good work I'll keep giving you support.
Remove the skid plate Completly
Exhaust heat shield
Sounds too high a pitch for inside motor.
I could use one of the rear break packs
Oh lord can someone please bless this man with a pipe😂😂
hahah
I’ll take the stock one
Looks like he has money 😂
I found your channel as i was in search of buying my first bike and i have learned many things from your videos, They're very informative and you're super clear with explanations so thanks for the knowledge vintage, to much more to learn!
I would have took the whole skid plate off to see if it was the problem
yep this guy is a bozo the “extra brake pads” are for the front lol
Anything I can help you with or I notice similar to mine, I'll try and help you out. Not a mechanic but I've been working on it and been on every raptor forum. It's a great machine, wait until you get use to it. I did 88 miles in one afternoon in upstate NY near Adirondacks this summer, literally one of the best days of my life. I just love the machine, very happy for you.
U get 3 in a pack 2 for the front 1 for the back brakes
Also, pretty sure they will fit honda as well.
Some people can't think that hard
And you will need all the extras lol 660’s eat pads
Trash the front brake calipers and convert them to the yfz450 calipers
Those intake valves being tight will def affect the pressure. I think ur fine on compression myself. Noise is def skid plate. Good stuff man.
Dude you got a lot of good vids keep up the stuff.😃👍
I've used a mechanics stethoscope for my car to find a whining noise. That would help you find it I believe. Keep up the good vids
I think I might know a trick for that compression release. On some of the old tractors I work on there is a compression release on the camshaft. To get an accurate reading I would roll the engine over backwards and that usually works. Maybe it would work on your 660.
Not certain but i dont think 660s have a compression release. My 02 doesn't anyways. Now my ktm 525exc did and it was a twat
I love your voids and I could use some new breaks. But I have a 2007 Honda 400ex so those pads won't work. Keep up the great work much love from Michigan.
great job as always! enjoying how you are making videos now! keep it up and still wannna collab!!
Take the skid plate off and still see if it rattles 👍🏻good vid
Love the content brother, I could use the pads definitely
Try snatching second in the middle of your wheelies. Or pop it up in second at a roll. Wheelies will be more controllable. 👍
Hey Joe I'm not mistaking that sounds like an exhaust clamp that is loose or something with the exhaust keep up with the good videos and don't pay no mind to the haters
Aint no one hating
Good catch on the bolt. Is it coming from in the silencer? Exhaust heat shield? Maybe u could put thick o rings on between the frame and the skid plate. Put an oring on each bolt, maybe 2. Did that on my 250r.
I'll take the rear brake pads? I have a 01 660 r... great job on the fix!!
Keep up the awesome content 👍👍
Enjoyed this video, could see better what you were working on. Don’t know if it’s because the light in the garage was better for it maybe.
Whatever is rattling is thin light metal, a heat shield , baffles in exhaust, some cover ?
You should recheck the compression now that you've adjusted the valves.. a slightly open valve (tight) can cause loss of compression
Yeah I was going to but forgot haha. I will check compression again. I'm pretty sure it's just the decompression messing with the compression though.
I got raptor 700 and for some reason it is really easy for me to plow trough the brake pads so I would recommend keeping some extras.
I’ve been waiting for this 😀🤪
Joe , check the heat shield once again. I think that’s where the rattles coming from. Also they have you 3 pads for the front too.
Check the clutch throw arm rod maybe twisted out of alignment. Is the muffler bolts loose around the crush sleeve.& on the engine itself. Those will make that rattling noise to.
Check your exhaust heat shields for that rattle I could use a set of them brake pads but great show thanks a lot
I don't know what gear you got on that one but I've been liking the 15 in the front and the 42 in the back
You should get it some spacers at least for the front wheels. It’ll help a lot with stability
Front and rear brake pads are all the same, you received a complete set of pads for the quad. Also check your exhaust and make sure the rattle isn't coming from there.
The exhaust heat shield mabye rattling?
I checked...not it unfortunately
@@2vintage age
@@2vintage metal skids plate can rattle put foam on skid plate to minimize vibration
Take the whole skid plate off and see if it eliminates the noise
Awesome video man
I had a raptor 660r before and I had the same rattle noise I found out there was a rock between the skid plate. I would take off the skid plate to see if there’s a rock or something rattling
you should check the rear skid plat under the swing arm or the exhaust bolts
Hey 2vintage, I commented on your last video and I don’t know if you seen it. But if you watch the front passenger side lower a arm you can watch something move only when you hear the rattle noise. Go to previous video and watch it were I put the time stamp. Hope it helps!
You can buy skid plate foam. From motorsport or Dennis Kirk or something. Sold in sheets made for vibration I believe
The extra pads are probably for the front
Hey love the vids man can you please do a 400ex and 660r race I have a 400ex and I’m looking into getting a 660 too so just curious lol
Raptor with big 3 will smoke a 400. Stock they are pretty close. Raptors airbox is very restrictive.
The 660r is gonna smoke it. Me and my homie raced them. Both had exhaust and intake
So did the compression change after valve adjustment?
Amazon sells Raptor bolt kit, awesome to have for the 660’s 🤙🏻
And for the rattle check the exhaust heat shields or could possibly be something broke loose inside the muffler with a slight rattle to it
Those brake pads also fit on the Honda 400 and they use the same parking brake delete plate as well
I have a raptor 250 those break pads would be a bless :)
sick vid and my quads been needing brake XD but becuase youre vidz im getting a 660 most likeley lol take care thoo i watch you dauly when i can
It's the baffle or spark arrestor my buddy's trx 250x makes the same noise from that area
Amazon has a stainless reverse knob bracket for $10 not sure if that's your issue but it worked for my 660
Thank you, I will check it out!
Check pipes are all tight. It sounds worse under high rev may also be loose cam chain. It doesn't sound like its skipped a tooth but it does kinda sound like the chain slapping the side of case inside.
Hey is there a swing arm skid plate on that quad Maybe thats rattling? And check the heat shield and all the exhaust bolts
It is the skid plate I had mine tightened all the way and had to add little slivers of rubber to get it to stop from rattling
I think its the starter clutch if it's been replaced and wasn't tightened to spec it will sound like that good at idle and open throttle but reving it will sound like that mine had the same problem when I replaced mine
Did the compressor get better after adjusting the intake valves?
I have a 07 Yamaha raptor 350 the rattle that you have sounds like coming from heat shield or muffler bracket
Take the skid plate off and se if it still makes the noise
Hey check all the bolts my warrior had a bolt loose down near the chain somewhere
Those tires grip grass really good
The rattle could be broken exhaust baffles in muffler or no copper washers between the head pipe and cylinder
I love your vids man I’m picking up a blaster on Friday I’m 13 and exited
Awesome! Good luck with it! They are fun!
Man I’m 12 and I got a blaster about 1 year ago running great. Every time we took it on a big ride it would blow up. Then we figured out a bunch of the seals inside the cases were cracked and the case had gasket maker on it sucking in air. Good luck
Blasters are fun. Great for your age. They have a pretty smooth power delivery for a two stroke. They are powerful enough to have plenty of fun but are still safe if you know what you are doing.
@@2vintage I'm 11 with a raptor 700r bit big bhore kit and it's a 780 now
Thank u man
The noise is the skid plate, had the same thing on mine. You need to get a raptor 700 next
I’m not the greatest at wheelies but one thing I did learn which helped a lot is that when you get it up try not to be choppy with the throttle try to keep it smooth it helped me maybe it will help you
Thanks for the tip!
Was that crazy buzzing or rattle the front brake lever vibrating i watched your riding it and when you rev up the lever vibrates ????.
Should’ve put a new rotor on that ones heat warped I bet from that pad that was only metal and it’s gonna chew those new pads apart
Hey man just got a new 660r, thing needs new break pads, would love if I could grab a set. Thanks!
Very good build on fix it yamaha raptor 660
Try tightening ur exhaust shields and try taking off the skid plate then testing it there is also a cover that goes over ur throttle cable on the carburetor try tightening that cover
The Rattling noise could be the heat Shield on the exhaust
Did you check compression after adjusting valve?
No he blamed the battery for the low reading he said the valves r fine it was just the battery giving it a low reading haha I've heard it all now
I had the same problem and it was a washer that fell between the skid and the frame.
I think it would be cool if you put an after market exhaust and the exhaust shield might be rattling.
Check the Black things where you put your feet cause mine rattles cause of loose screws on the feet rest.
I just subbed and if you still have those break pads I just got a Yamaha raptor 660 today
2 vintage u should get a motion pro tester they are a little more but way better then the cheap ones
leakdown test is the true way to check for any internal engine problems. compression test is not very accurate with compression releases and it doesnt tell you what is causing the low compression like the leakdown will
Don’t know if you picked the two people yet, but I would love some brake pads. I don’t know if they would fit my quad. It’s a 2006 Yamaha 350 raptor. I’m assuming they use the same pads and rotors.
Check all the exhaust bolts for the raddling or the spark arreste
You do good work for a backyard mechanic
It’s is full time job. Not backyard
Now I'm worried about my valve adjustment. Gee thanks.
Seriously though Nice Video thanks 👍🙏
Timing chain slapping or Maybe the motor mount bolts are loose
Would love brakes for my raptor 350. The brakes squeak and were just re-bled so it is definitely pads
That noise sounded like sheet metal vibrating. Maybe a heat shield loose? I've heard similar noises on loose internal muffler baffles - rare but it happens.
Would use a pack of those pads. I have an 02 660r thats been built as a 686. Is the rattle your timing chain? Been there done that, bad tensioner.
I just bought a raptor 660r would love thoes brake pads
You have got to do a Raptor v Banshee and Quadzilla race!
We need some old bikes in here
Next video
I'm hoping so me and my dad rebuilt a d old honda
Check exhaust system for rattling specialty the box Alan Northern Ireland 👍 Love all your videos!
That noise that you hearing is coming from the muffler the Exhaus part I own the same bike And the owner before me try to make it louder so he left the stuff inside the Exhaus loose And I hated that noise every 2nd Until I figured it out
Think maybe exhaust mate by the sounds of it
Take the skid plate off btw. Just kuzu it seems tight doesn't mean it's not rattling
I will have to do that
I have a 2007 raptor 700 and it rattle when it was in high rev and it was the skid plate the bolts where tight but still rattle so i bought this tape cushion and put it around the skid plate where it touches the frame and tighten it again and the rattle was gone.
@@2vintage I think it could be the heat cover on the pipe
@@itsyoboydaniel8570 That's funny i have the same exact quad as you and i had to do the same thing! lol
@@loganw4189 looks like its missing a bolt?
Check motor mounts for rattling.
Got a question I have a 1996 rm 250 2 stroke runs cherry but won't stay on when idle in gear only stays on in nuteral what can be the promblem?
I'm going with compression release.
When you wheelie try a gear higher go all the way back and learn to use the back break also try switching thew the gears in a wheelie it will help a lot I use to chase it before I learned the back break
Pull the skid plate and see if it still makes noise. If so you can get some rubber hose the same size as your frame cut it in half and bolt the plate back up. You will need a new rotor also or you pads not going to last long
@2vintage I have a 2005 rmz 450 it runs strong as hell just dosn't wanna idle for more than about 5 seconds would that be valves or carb?
I have the same machine, got it brand new. The only time I ever flopped it was doing doughnuts and landed on the right side fenders causing the white stress marks and broke my reverse knob. Looks like the same thing happened to yours.
You should check the spark arrestor in the exhaust
You should be looking for up around 160-180 psi that is great
I bet it is the skid plate making noise had a z-400 did the same thing get you some rubber washers and put them between the plate and the frame
Hey you still got a set of those rear brakes left for the raptor? My name is Greg, I've got an 05 raptor 660r that also needs rear pads unless you already got rid of them.
Take the skid plate of bro and check for loose stones etc rattling on it
I had to do a valve adjustment 1st year, top end 2nd year.
Could the rattling be from the heat shield on the exhaust
My guess as well. My Warrior did the same thing