They Said This Yamaha Warrior Couldn't Be Saved...(FIXED!!)
HTML-код
- Опубликовано: 14 апр 2022
- I rebuild the engine on my Yamaha Warrior 350. Will it run and drive? #Yamaha, #Warrior, #Mystery,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
► ADD ME ON ALL SOCIAL MEDIA ◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.
You should get yourself a parts washer. Clean everything before re assembly. I got mine at harbor freight cheap, but works good enough for what we do.
We used to refer to those flex hones as dingleberry hones. Used 'em for the same thing you just did. We have a much better and more expensive, of course, hone for using after boring the cylinders. We use them to bring the cylinder to the exact size desired. Anyway, I saw you wiping the cylinder with the shop towel after honing. The cylinder should always be washed with soapy water after honing. Oil should be applied after washing. There are microscopic abrasive particles that no amount of wiping will remove and those particles will wear the rings quickly.
Very good pts indeed. Thanks for the information.
Ive always used rubbing alcohol or lacquer thinner on microfiber towels to wipe down cylinders or mating surfaces after being honed, bored, or machined and i dont stop wiping until the clean spot on the microfiber no longer changes color. I use tht instead of soapy water because it will really get off EVERYTHING, itll evaporate off on its own, and i dont have to worry sbout any flash rusting possibilites or water contamination in any bearings. I also use a spray bottle with a light weight oil in it and mist it over everything and give the cylinders a good wiping with an oily microfiber. works absolutely beautifully.
The old school term for those hones is bottle brushes.
You oughtta see what happens when folks use scotch brite on engines! Guaranteed to take out cranks and cams. Folks don't get the abrasive residue 100% removed and the oil filter will bypass.
Man, you have one hell of a mechanical mind. Really good at what you do on here. I can still remember that video where you got so upset about someone telling you that you didn't fix something right or it was something like that. You had a fit over it lol. Made a whole youtube video of the bike just running. I think you've made your point over the years my friend. You definitely know what you're doing. Stay safe, stay well, God Bless.
Your videos are always very helpful and thorough. You did a lot of work on this machine and it runs very well. Your videos probably help you out with your sales. People can see just exactly what has been done. Thanks again for your time and videos and enjoy your weekend.
i really like this show he is awsome i watch him every day keep up the show
Thanks for watching!
Are you looking around for cheap Quads and Two stroke now? I am hahaha 😎👍🏼
@@INORBET buy ..(fix properly) & sell em in your region. Good $ in it if you have the skills.
@@2vintage for sale?
I really enjoy watching your content, I’m happy to see a young man getting his hands dirty and (assumably) enjoying what you are doing. Where did you learn your trade of small engines?
Probably my favorite video series I’ve seen from you man. Nice work splitting the case and getting her back in the dirt!
I never get tired of watching this channel! This guy is an awesome mechanic!
Good job! Watching your journey through this one lets me know what I will have to go through on mine when it gets to that point. Mine was "warped" somehow, and I thought it was a bent frame. Turned out to be bent swingarm, but I tredged through a whole lengthy education (for myself) to figure out how to set it up to measure where and how it was warped. It was a fun education, though, and even more fun to make a set of videos on what I went through from beginning to end. Thanks for this series of videos!
Good job man, great seeing videos of a normal guy doing something he enjoys.
Love this channel and your videos. You’ve sparked a renewed interest in fourwheelers for me
Nice to watch another video, we all can learn something from u....
I've learned so much from your channel , just wanna say thanks as my confidence is going up and this summer I am starting my own projects 😁
BRAVO, you figured it out and took us on a ride - living the good life
Back when doing my first rebuild I used a hose clamp for a ring compressor. Worked like a charm.
Good work man! You brought her back to life! Really amazing work! Back 2002 i was in doubt between the Yamaha warrior 350 and the Suzuki LTZ400 , I'm glad I've went with the Suzuki (huge room for improvement+ it really grew up with me) but seeing your warrior 350 now makes me want one! They are really good quads when you compare them to their competitors back in the day (warrior 350, Suzuki z400, Honda 400ex - but the banshee 350 was the king back then 😀) because of the reverse, 6 speeds, air-cooled!
Good pts i agree 👍. You made a good choice w/ Suzuki LTZ400 quad..some ppl don't realize Suzuki invented the modern quads in late 80s plus had 1st performance quads (Quadracer). Try get a real clean used Yamaha Raptor 350 (has updated Warrior engine) or if you have the financial means a new Raptor 700R. *Prob the best all around sport quad ever made!* We are lucky Yamaha still makes em. Hard to find @dealers as well.
Should apply a good spray degreaser to frame, engine etc b4 goin to pressure washer in town. Will work well loosening grime on any machine on the way there! Tons brands on Ebay or @local parts store.
Nice job joe actually came out better than I thought it would cleaned up really well sounds really good too not a bad quad by any means great work mate take care and have a good Easter ps awesome channel buddy 🔧🔧🔧👍👌
great video, great channel, and super descriptions
Great Video. I had a 1987 Warrior that I had bought new. Loved that Quad. Tough to find a good one now. Thanks for putting this on RUclips. James
Awesome job as usual. Have a great Easter weekend.
Noticed the intake valve's rocker wasn't making complete contact with the valve stem. It's almost half way off the stem, off to the left. Never seen that on an un damaged valve train before. Not on a Japanese manufactured engine.
Yeah, I was hopping he’d address that in the video. He talked about it in the first video of this machine, but not this one.
I was hoping he would have talked about that too. Doesn't seem right to be off that much
It was off. Very surprising on a Yamaha motor especially! Cannot be orig like that from factory.
Great job! Bring me great satisfaction to watch you save another motor from the landfill. A+
Yz250 direct shifter would cure the slop in the factory linkage shifter. Mounts directly on the shaft.
Awesome job brother, you might have to work on that throttle position next, it looked very uncomfortable lol. Be safe :)
Way back on another build, I said u should use permatex ultra black 2:02 it's super great sealer and oil resitant and very strong.
Awesome videos bro. I love seeing other ppl that like taking stuff apart an fixing it them self. I have a very small shop were I build an fix stunt bikes. I love what I do an I can tell in your videos so do you keep up the killer work brother!
My Yamaha warrior was stolen from me, It was mi favorite atv ever.. now i own a yamaha blaster and runs pretty. Nice Video.
Great job man!. You are very good at what you do and i watch every one of your videos.
i was told by a shop that my grizzly couldnt be fixed and i fixed it myself
You should get a Yamaha raptor 350 and do a race with the Warrior 350 and see what is faster
same engine
Yea but differnt gearing and frame ?
@@MrDEANOSCOOLVIDS not sure on the gearing but I believe that raptor has to be lighter lol
@@MrDEANOSCOOLVIDS 6 speed no reverse i think
I know the ideal is to see what is faster
That one quiet compared ours, the power core 4 on it is excessively loud, but very nice. Love the 6 speed on those to.
I’ve learned alot from watching your videos and am getting a lot better myself on working on small engines. I plan on starting a channel recording my journey as well! Just started recording today
97 Warrior yellow was my first brand new Quad, very reliable. Ran mine for 15 years and sold it for 700 bucks in mint condition. By the way when you're shifting from reverse to forwards if you rock it and put it in first gear it'll engage easier👍
Good shit bud keep up the good work!
She’s a beauty now! Awesome job
👍👍
Haha that thing was rippin at the end! Awesome vid
Love the vids great job
If you ever have a set of "disposable" plastics for a quad or dirtbike, you might want to try "lightly" heating them up with a torch a bit. I watched it done and it works AMAZING on plastics that you would assume were beyond bringing back. Obviously just go carefully and don't completely melt them, but try it on something that doesn't matter first and see how it goes ! I think you will be amazed.
I'm done the same with great results
Awesome video! Love the content.
Look everyday for upcoming videos absolutely wicked channel so interesting and fun to watch great work
Thanks for watching!
Very nice rebuild job!..💯% Brought back some old memories 🤔💭 of me, my '74 Yamaha RD350, and the good times we had!..🥰 She was all black, "bored" to the max, ran gold anodized high compression heads, and two-into-one expansion chambers, all with a "café" styling!..😉👌🏾
#MyStreetRacer!..🏍💨💨💨
#AnAbsoluteStreetDemon!..😈
It's crazy how fast you put out videos
GJ! This quad was doomed. Thanks for spending the extra time to clean it up, nite and day.
Great job man!👍🇬🇧
Beautiful rebuild my man! Those Warrior are hard to die. I LOVE mine and will never part with it. Should of opted for a Banshee rear shock though and a YZ250 shifter to eliminate the slop.
Great job on that motor. Too bad it's got scattered parts. Great vid, 👍
Have power core 4 on our warrior, one loud s.o.b. nice quad man.
My first quad was a early 90’s warrior. I’d went from dirt bikes to a quad. I had the red and black color scheme. Loved reverse in the woods. I ended up snagging an 01 warrior later in life, ended up riding it an trading it for a predator.
I had a second generation and came from dirt bikes as well and had a blast on it. What year /cc Predator did you get and do you like it as much?
Really like watching your videos,You do good work👍🏼👍🏼
Got a blue and an old white one for parts. The motor in it is cherry but it's just sitting out back of shop in case u need parts. Holler if you need something.nice quad dude!
Awesome job man you really know your stuff that’s for sure 👍👍🇺🇸
Great video been binge watching your stuff bro! She sounds kinda nasty 👀🙌🏼 good work
I wish you would've showed the valve seal installation itself
I would really like to see how you do it exactly
because I just rebuilt a 1998 yamaha grizzly 600 and the valve seals didn't fit on the guides overly tight...
now it's smoking on start up and I have to redo them
Another ride brought back to life 👍😁
Could tell you really enjoyed that extra gear,hell yeah!!!was just wondering on that crooked valve rocker arm,other than having a new head and rocker components could a shim be used to get it better alingned to sit straight on valve stem or is it not that important,just as long as it pushes spring straight??snooky pa.💥👍💥
Yours would be the best quality warrior vs. blaster video on RUclips,trust me I looked
bloody hell you get parts quick in the USA
We’re not really Americans anymore but don’t tell anybody😮
Sheeesh. Good thing you checked that carburetor!!
watch like every video nice work man, I think its about time you up your video skills and make the videos a little more interesting. keep up the good work though man
Seems a good & steady supply of used quads & dirt bikes in Upper Midwest region. Keep up the buyin/sellin/restoring! You will make good $ and have a very nice collection to show for it. 👍-Ohio #Maxima #TwinAir #YamahaQuads
Amazing video waiting for moped videos
It cleaned up really nice!..👍🏾😁
Just sayn,,,when u get the bike u powerwash ,then when u have the engine apart you Parts wash all that liked the head that was filthy,,, while the engine's getting fixed you touch up the paint that's when you would put the new shark on text brakes clean all that stuff up almost perfect, so when you put everything back together all you're doing is wiping it down with a waxy rag you seem to be doing things backwards
It's almost like a mini restoration and you would get a lot more money for all your bikes..
It just seems that it would be easier when everything's apart and you can reach and get to everything
It seems like you get everything running so it wouldn't really be a waste of time cuz you always get the bike going
whispering oh yeah baby has he plays with the rod and crank movement... lmfao..
lol
I laughed so hard 🤣
Love the channel, like the car wizard, you need an Amazon affiliation link for tools used so you get a cut. What about merch - tees, mugs, caps, and gloves?
Think somebody needs a parts washer.
Great vid!!
Good job enjoy your videos
When putting in a fully built engine, I like to get it close and then stand on the foot pegs and wiggle it into place. It looks funny but works wonderfully
Good work Jo, will the advent of Spring bring back the two wheelers?
Working on one right now!
I was a big fan of AL Unser Jr racing cart cars, (Indy Cars). I went down to Portland to watch a race. He was promoting Valvoline Oil. So when I got home I changed to Valvoline. Yes I could certainly hear my valves after the oil change. Every valve. So I went back to Castrol Synthetic. Ever since.
you can pull cam out without losing the valves and there is another metal piece that goes over the piece that holds the cam in that locks the bolts from coming out
I miss my old warrior 350, I had that sucker built up with every part I could find for it including a edelbrock carb with dyno-jet jet kit DG stage 3 pipe and stage 2 hotcam had a quarter turn twist throttle on it so she was a sweet little ripper I beat the piss out of that thing for years and it never gave me any issues I ended up selling it for more than I paid for it like 6 yrs later but she was a good little machine!
Nice work broooooo
Awesome video, it is a nice warrior
Before you pressure wash it you should get a few bottles of engine degreaser and spray down what needs sprayed and let it sit on the way to the wash
You don’t want any!! Gasket maker to make its way into the internal engine parts
This is helping my buddy with his since his had same problem
I've got an entire complete motor for a Warrior in my shop if you need it. Can part it to, I guess.
I'd suggest using assembly lube if you're not. Aside from that looks like a job well done to me!
I’ve owned several warriors and loved them because it’s a some what sports bike with reverse
Your upload time fucks. I get off my first shift at 10am and I love eating breakfast and watching these. Keep at it. Get a table lift for the shop!
Ahh the matching crappy yellow replacement spring/shock what a find hahaha 👍🏼👍🏼👍🏼😎😎😎
A cleaning product call Mean Green is amazing for plastic. Cheers.
Magic Erasers were great on cleaning up plastics on atv works real good if there white plastic
Nice job.👍
lot of work been done on that quad recently before you got your hands on it, hope it pays you back . as it looks like it still wants more with the steering , but where do you stop with these things
Great video and I actually dig that color scheme. Maybe cuz I'm a Steelers fan. Lol. And speaking of Pittsburgh I've actually debated contacting you to see if you would be interesting o working on 2 projects I have. A 66 Suzuki k10 and a 74 Yamaha dt250. Just hate the thought of driving to Wisconsin from Pennsylvania if you said yes. Lol
hey joe , how you and jade are good ...... i have a question for you :) at 16.46 ..... i noticed your valve tapper is contacting slightly to one side of the valve , I'm asking as i recently rebuilt a yamaha tw (very similar to this warrior engine)......... how would you go about correcting the alignment , maybe removal rocker arms , check for wear ??
The bike seems to be running soundly , however it bothers me enough to want to take my engine back apart , i rebuilt it already as a mock up to make sure things were seating properly etc but yano ...... i havent ridden for a couple of months and well...... I may have XD
keep the vids coming dude
Good job!
man these video's are very entertaining
awesome job
Good morning, greetings from Pennsville nj..
Sounds sweet as a nut,lovely job!Props to u for saving it,idles nice too!🤔👍💪👍
My pops 87 warrior was in fact bullet proof. Nothing could kill it. We put a hi comp piston in 89 and run the bike to this day.
Dang it’s kinda crazy that you get ahold of most parts you ever need we’re do you go
I have a yellow warrior just like that and I had to scrub the plastics for hours with scotch brite and soapy water to get them looking decent
Nice job thumbs up
Hey I was wondering if ring end gap position matter that much on a 4 stroke if it off a little bit
Always impressive
Good job