Brembo Brake Rotor and Pad Install Tutorial in 5 minutes (BK2 Genesis Coupe)
HTML-код
- Опубликовано: 17 окт 2024
- How to install rotors and pads on 4-piston Brembo brakes! This is a surprisingly simple job that anybody with some basic tools can do.
Make sure to buy the correct size rotors for your setup, measure your current rotors so you don't make the same mistake I did!
I was gonna say "bro delete this it makes you look bad" but this is an important lesson.
Basically everyone that works on cars learns the hard way about triple checking the part you're ordering.
This videos really made my work so much easier!
Shall come in handy in the next few days. Thank you
Where did u get the front brakes I can only find the rears on brembo site :\\
Hey Man, What's the actual price of Brembo break for all 4 wheels?
Is this the same for the rear?
I ordered brembo pads for my 4runner, these brembos pretty good? I called Toyota and apparently oem rotors are brembo pads are akebono
good job Johnny
What’s the part number or type of ultra 8 rotors you buy?
Can I add aftermarket brembo's on a Hyundai Genesis Coupe 3.8 GT
I had a friend do that and he said the Brembos made almost no difference from the old stock brakes he had
Where did you get the calipers from?
Ehhhhh i was always trained (at home and at shops) if you dont have a brake decompressor or a speedy brake kit(lisle makes a good one) to always use a C-Clap and the old brake pad as a squishing mech so you dont ruin the pistons by giving un-even pressure.
Do you need to bleed the break fluid? Bout to change mine soon
As long as you don't disconnect the lines, you don't need to bleed them! I would double check how much brake fluid you have in your reservoir, because when you squeeze the brakes open you are pushing fluid back into the reservoir and you don't want it to spill over. A turkey baster or something like that can help.
Bro I just got the brembos but how do I know what rotars to use
should be 3.8L rotors
how do you get the rear caliper off with the caliper bolt buried in the lower control arm? (rear brembo brakes)
u find a answer?
@@stevenstickney3498 no. no one addresses the fact that you have to drop the lower control arm to get to the lower caliper bolt. I can't find a way to do it without dropping the control arm. 20106 Hyundai Genesys 3.8 ultimate coupe with brembos on all 4 corners. dealership wants north of $1,800 to do the job parts and labor. that's criminal.
@@1Bigduff hell no
@@1BigduffI'm late to the show, but impact drill with a socket extension. At least that's how I did it, lol
vehimcular mamslaumter
Wot