Instead of mix use darken for the MixRGB node mode. It will pick the deepest groove from either the crack or grainy texture and you don't have to use a third colorRamp for the mix factor.
I don't even undestand what is the "trick" in this video. Masking textures? Hardly a trick. Combining textures before plugging into the bump node? I thought it was how everyone does it.
@@patakk8145 This dude is about making his own "brand" by showing noobs some tricky things, like how to delete default cube or save a file. Some fastfood feel good epitome of youtube tutorial right here. Saw some of his tutorials before and didn't have any hope for this one also, 2xed speed and skipped straight to his "trick" thinking "common, are you gona show us the math node or something" and he did not disappoint. For real stuff Default Cube guy is very good. Lost some braincells and time watching this one.
@@Sirin111 Gonna be real, Default Cube doesn't always do his research and talks out of his ass a lot too. I appreciate what these guys do though, even though QC is pretty bad sometimes.
@@Sirin111 This is the second one in a row from him that was recommended to me and both were disappointing. Neither of them explained upfront what the viewer will actually be learning. I watched an entire step-by-step tutorial for a geonode animation and the actual animation was never showed. Not at the beginning so you know what you're about to get into, or even at the end where you'd expect to see the final render. I've seen a lot of people in the comment sections who are happy to just click a random video and replicate every step, and if that works for them that's great. But I wish D3D (and similar channels, but this is definitely the worst offender I've stumbled across) would respect people's time by being upfront and honest about what to expect. You shouldn't have to watch at 2x speed or skip through an educational video to find out what you're supposed to be learning.
I think it'd be more realistic if you switched it and had the scratches on top of the texture so that the texture wasn't showing inside the scratches That's how it would look if you had a textured surface and then scratched it, you'd scratch the surface texture off and have a smooth scratch inside.
I need to remember this. Super useful! I'm not sure I would apply it the same way but that's just preference; I feel that in this example the roughed up surface almost looks mossy whenever it crosses a crack. Inside a crack like the ones shown here you wouldn''t have that kind of rough texture, since almost nothing get easily get in those types of cracks to rough up the surface in the first place. It would be relatively clean looking.
White is 1.0, Black is 0.0 . The voronoi texture's edge is 0.0, the voronoi texture's face is 1.0 . The noise texture's range is 0.0 to 1.0. If you subtract the noise texture from the voronoi texture and clamp the result (so it doesn't go below zero) you may get a similar result. Shape the noise, map the range, get different effects.
Request: Love your videos. I cannot find a good tutorial for that effect where something explodes or particles flow out of a source and come to rest in a perfect final shape or logo. It sounded like something you would know how to hit well. Please help.
lol it's funny because I just learned how to make donut on blender and now yt recommended me this, I don't even understand what're you talking but it's interesting
You are really skillful in blender and this is another good tip. However to my ey the old one looks more realistic. It surely does look like the erosion "ate" all the grooves but oit also wouldn't be straight cut as in the second method. But hey, is is only my opinion. great work!
Looks really great. I played a bit with the values, but the cracks are too straight for my taste. So I added a Noise Texture with a Colorramp into the Randomness of Voronoi. And to tweak the width of the cracks better I put a Map Range Node between Voronoi and the Colorramp. Nevertheless, great hack!
Love it! I'm looking forward to applying this technique in my projects. Your tutorial videos are always next level! Thanks so much for sharing my friend! 😃
Imho the first version looked by far more realistic. In the second version the "erosion" lies OVER the grooves and makes no sense. In the first version the grooves were always visible as they are a much deeper surface detail. The "erosion" was then applyed to that surface detail as in reality.
A darken node in the MixRGB shader would be far superior as it calculates the darkest colour from the two bump maps and uses that for the bump depth. This allows either texture to "eat" into the other along their edges based upon which is deeper.
Could you Make a video Tutorial for the denoiser of Blender 3.0 . Since Blender 3.0 I have problems with my cycles renders. Sometimes Blender detect my material as noise and denoise ist but thats not whats i want to…😅
What’s the difference between real time materials and pbr nexus? I used to use substance for texturing and with it being 30$ a month I don’t really have the money to justify that. Is this as simple to use as substance and what does this do and doesn’t do compared to pbr nexus?
Hey there! I recently found your channel while trying to figure out how to mess with lights and such in Blender, and I am loving your work! However, I have been banging my head against this project I'm working on, where I cannot get my metallic materials to reflect the emissions of objects properly. So I was wondering if you guyus still had that discord server up? Because I would love to join, and perhaps ask for some assistance in getting this to work.
Hi Braphics. I found a tutorial from "Blender Tutorials" regarding reflections. But it's for Eevee. Hope this helps. ruclips.net/video/zSeOqTXhuSM/видео.html
confused how having the bump ON TOP of the crack is more realistic, the crack is literally the absence of material there should be zero texture on top of it
You could try masking. Basically get the your desired cracked texture, then use a mix shader to combine the texture to an emission texture. Use the same bump map node collection to put it into the factor of the mix shader, duplicate the colour ramp just in case you need to slide around with it. You be able to get the desired result
Is it possible to make a realistic teslacoil effect with geomtry nodes? I want to make a very realistic teslacoild effet in a glas ball. But I can only find stuff that fell kinda half assed attempt.
hey @ducky3d, i bought your addon with materials. but if i apply i on big walls for example i find it complicated to scale it ( im like a begginer for shadings stuff). Any tips?
Am I the only person this doesn't work for? Using the noise texture as a mask did not effect the cracks, save for a small reduction. They are still clearly apparant. Adjusting the sliders on the third colour ramp for the mask only changes the noise, and does not effect the cracks.
Hi. I have a question about BLENDER 3D 3.0. I know CPU rendering takes more time, but why when rendering just cube with no textures and single light it wants to render over 25 minutes ???? What is wrong???? I know it was rendering faster two days ago. Can you help me???
@@blindshellvideos my CPU i7 7700 3,6GHZ, my GPU is gtx 1060 6GB an 16GB RAM. I rendered just cube because I wanted to test. I opened new file and there are default settings.
Instead of mix use darken for the MixRGB node mode. It will pick the deepest groove from either the crack or grainy texture and you don't have to use a third colorRamp for the mix factor.
I don't even undestand what is the "trick" in this video. Masking textures? Hardly a trick. Combining textures before plugging into the bump node? I thought it was how everyone does it.
@@patakk8145 This dude is about making his own "brand" by showing noobs some tricky things, like how to delete default cube or save a file. Some fastfood feel good epitome of youtube tutorial right here. Saw some of his tutorials before and didn't have any hope for this one also, 2xed speed and skipped straight to his "trick" thinking "common, are you gona show us the math node or something" and he did not disappoint. For real stuff Default Cube guy is very good. Lost some braincells and time watching this one.
@@Sirin111 Gonna be real, Default Cube doesn't always do his research and talks out of his ass a lot too. I appreciate what these guys do though, even though QC is pretty bad sometimes.
@@Sirin111 This is the second one in a row from him that was recommended to me and both were disappointing. Neither of them explained upfront what the viewer will actually be learning. I watched an entire step-by-step tutorial for a geonode animation and the actual animation was never showed. Not at the beginning so you know what you're about to get into, or even at the end where you'd expect to see the final render.
I've seen a lot of people in the comment sections who are happy to just click a random video and replicate every step, and if that works for them that's great. But I wish D3D (and similar channels, but this is definitely the worst offender I've stumbled across) would respect people's time by being upfront and honest about what to expect. You shouldn't have to watch at 2x speed or skip through an educational video to find out what you're supposed to be learning.
@@noaburr Anything else?
I think it'd be more realistic if you switched it and had the scratches on top of the texture so that the texture wasn't showing inside the scratches That's how it would look if you had a textured surface and then scratched it, you'd scratch the surface texture off and have a smooth scratch inside.
what if you put the noise into the scratches to give them more detail?
I need to remember this. Super useful! I'm not sure I would apply it the same way but that's just preference; I feel that in this example the roughed up surface almost looks mossy whenever it crosses a crack. Inside a crack like the ones shown here you wouldn''t have that kind of rough texture, since almost nothing get easily get in those types of cracks to rough up the surface in the first place. It would be relatively clean looking.
White is 1.0, Black is 0.0 . The voronoi texture's edge is 0.0, the voronoi texture's face is 1.0 . The noise texture's range is 0.0 to 1.0.
If you subtract the noise texture from the voronoi texture and clamp the result (so it doesn't go below zero) you may get a similar result. Shape the noise, map the range, get different effects.
You can actually use as factor a less than 1 node after the color ramp to have a perfect match
Love this idea. Thanks for sharing Ducky!
you are my saviour
Request: Love your videos. I cannot find a good tutorial for that effect where something explodes or particles flow out of a source and come to rest in a perfect final shape or logo. It sounded like something you would know how to hit well. Please help.
Try useing the object you want the particles to flow into as an emitter, then use a force field to acctract the particles, and reverse the animation
set the force field strangth to -1
and make sure your emitter is set to emit form volume.
Awesome tutorial, thanks for sharing!
Amazing Trick Dude!
Great stuff! Thanks for the tutorial!
lol it's funny because I just learned how to make donut on blender and now yt recommended me this, I don't even understand what're you talking but it's interesting
Amazing!
Very Thanks.
Great tip!!!
Great video
if it's not too much trouble can you make a video on manifold mesh error fix please !!??
You are really skillful in blender and this is another good tip. However to my ey the old one looks more realistic. It surely does look like the erosion "ate" all the grooves but oit also wouldn't be straight cut as in the second method. But hey, is is only my opinion. great work!
I have been useing the mix RGB to combo bump textures for a long time. I didn't know about the double bump nodes.
Looks really great. I played a bit with the values, but the cracks are too straight for my taste. So I added a Noise Texture with a Colorramp into the Randomness of Voronoi. And to tweak the width of the cracks better I put a Map Range Node between Voronoi and the Colorramp. Nevertheless, great hack!
എനിക്ക് എല്ലാ വീഡിയോകൾ ഇഷ്ട്ടപെട്ടു.
Can you do a "tentacle like" tutorial using geometry nodes similar to your old one from 2 years ago?
Right now you can’t achieve that with Geometry Nodes
@@TheDucky3D thank you for an updated tutorial though, absolutely love it!
Love this
You're awesome 🥰
Very clever
Love it! I'm looking forward to applying this technique in my projects.
Your tutorial videos are always next level!
Thanks so much for sharing my friend! 😃
Imho the first version looked by far more realistic. In the second version the "erosion" lies OVER the grooves and makes no sense. In the first version the grooves were always visible as they are a much deeper surface detail. The "erosion" was then applyed to that surface detail as in reality.
A darken node in the MixRGB shader would be far superior as it calculates the darkest colour from the two bump maps and uses that for the bump depth. This allows either texture to "eat" into the other along their edges based upon which is deeper.
Could you Make a video Tutorial for the denoiser of Blender 3.0 . Since Blender 3.0 I have problems with my cycles renders. Sometimes Blender detect my material as noise and denoise ist but thats not whats i want to…😅
Denoise in composition.
What’s the difference between real time materials and pbr nexus? I used to use substance for texturing and with it being 30$ a month I don’t really have the money to justify that. Is this as simple to use as substance and what does this do and doesn’t do compared to pbr nexus?
“Now we’re revealing the crack and that’s what we wanted”
hey is there a easy way to save preset procedural textures. in the new material library? would like a video on that, thanks
Hey there! I recently found your channel while trying to figure out how to mess with lights and such in Blender, and I am loving your work!
However, I have been banging my head against this project I'm working on, where I cannot get my metallic materials to reflect the emissions of objects properly. So I was wondering if you guyus still had that discord server up? Because I would love to join, and perhaps ask for some assistance in getting this to work.
Hi Braphics.
I found a tutorial from "Blender Tutorials" regarding reflections. But it's for Eevee.
Hope this helps.
ruclips.net/video/zSeOqTXhuSM/видео.html
confused how having the bump ON TOP of the crack is more realistic, the crack is literally the absence of material there should be zero texture on top of it
Nice
Question..How would you add an emission, or glow where the cracks are at?
You could try masking. Basically get the your desired cracked texture, then use a mix shader to combine the texture to an emission texture. Use the same bump map node collection to put it into the factor of the mix shader, duplicate the colour ramp just in case you need to slide around with it. You be able to get the desired result
Is it possible to make a realistic teslacoil effect with geomtry nodes? I want to make a very realistic teslacoild effet in a glas ball. But I can only find stuff that fell kinda half assed attempt.
Can I challenge you to reproduce the intro from the last The Witcher season 2 episode with the spheres colliding and then reforming into a tree?
What pc/laptop do you work on ?
My favorite trick is to pay for materials and textures
How do you get that quality of lighting?
woot!
I will be needing this soon
How to apply Change done in shading to layout?
Nicee
hey @ducky3d, i bought your addon with materials. but if i apply i on big walls for example i find it complicated to scale it ( im like a begginer for shadings stuff).
Any tips?
i already tried to recreate some material myself but can't have a good wall paint material with noise etc..
to be honest i have checked the materials and most of them looks fake
Am I the only person this doesn't work for? Using the noise texture as a mask did not effect the cracks, save for a small reduction. They are still clearly apparant. Adjusting the sliders on the third colour ramp for the mask only changes the noise, and does not effect the cracks.
your noise texture looks rough.. looks wet ... why ?
Pls do a intro Tutorial
At @3:07 we have a dead planet
my mix node is different :(
Like Jean Pierre has suggested: just use minimum instead of mix!
(it will look much cleaner than in the video)
@4:17 that's what she said? Or nah
Hi. I have a question about BLENDER 3D 3.0. I know CPU rendering takes more time, but why when rendering just cube with no textures and single light it wants to render over 25 minutes ???? What is wrong???? I know it was rendering faster two days ago. Can you help me???
Whats your CPU / Whats your rendering-settings? Without your specific blendfile its hard to tell you what mistake you made.
Maybe bring down the max sample count, 4096 is overkill
Try something like 512 or even less. If it's a single cube 32 could even be ok
@@blindshellvideos my CPU i7 7700 3,6GHZ, my GPU is gtx 1060 6GB an 16GB RAM. I rendered just cube because I wanted to test. I opened new file and there are default settings.
@@valovanonym cube was just for test. Default settings so I will try what you said.
@@19JustMike83 you can also set a time limit but I never used it so not sure what the results would be
more photo realism before this 'hack' :\
noice
The thumbnail looks like carrots
Можно было и не покупать курс твой))
Hmm
don't understand anything
👍🏿
Mehhhh