If the last step doesn't work: - Make sure you turn the bottom face instead of turning the whole cube to get the next piece - Finish the 4 moves (don't stop at 3) If you still manage to solve the yellow side but ruin the white side, you might have a twisted piece that you will have to fix by twisting it or taking the cube apart. (To know for sure, the last step requires you to repeat the 4 moves either a total of 6 times or 12 times. If you get a different total, like 8, then you need to physically twist a piece)
I'm kind of embarrassed to say I can solve an 8x8 but it has been so long since I solved a 2x2 I had to look up a tutorial. A word of advice for anyone who is trying to learn bigger cubes, about once a month go back and solve every cube you have, it is worth it. Trust me.
Dude, this is the best 2x2 tutorial I've found online. You make the 'theory' simple, and aren't just focused on "memorize these 9x moves and repeat them until you have achieved success". I was actually able to "look at the cube", find the colour I wanted, and was able to "move it" where it needed to be thanks to you! Appreciate this!
@@cozzihoffmaann My friend got a one from McDonald’s and he got bored so he gave it to me. I did my first solve on that and was determined to get better. So I learned 2-look oll. But since I felt like it held me back I got a 5 dollar cube (which was way better). If it was not for that cube I would not be into cubing nor even be watching this video rn
Everyone else: succeeded Me: Can’t even solve the first step and crying and having a meltdown Edit: Now listen here virgins I dont have a 3x3, so pls stop telling me to solve a 3x3 😭
When I solved it the first time everything became easier and now after a couple days I’ve memorized the algorithm and can solve it in a couple of minutes
I struggled with 2x2 for a while years ago and now I'm back into puzzles I checked this out after learning to solve a 3x3 with your tutorial in under 2 minutes. As soon as you started teaching the algorithims and I was able to notice they were the same as corner solves and corner orientations for the 3x3 I got it in under 30 seconds. 4x4 next for me!
@@BloonPlays Not so much. Went 7 or 8 months or so without solving a cube and recently went back to see if I remembered. The solutions are engraved into my memory like a traumatic childhood incident now
Hands down the absolute best 2x2 instructions! I love that the video isn’t filled with a bunch of crazy algorithms. Very straight forward easy to remember patterns. Cheers
@@wasnexhere I imagine if you haven't learned 3x3 this might be a bit tricky. Coming here after getting a 29 second on the 3x3 and this 2x2 is extremely simple. Basically cause it's the same as the 3x3 but with a fraction of the steps. So if you haven't done 3x3 I could see how it would not be so easy. Hang in there though, eventually it all becomes very easy.
I know the beginners method for the 3x3 and I was able to figure out how to solve the 2x2 but it was taking me a longer time. Your tutorial really helped. Thank you! ☺️
Yeah, i solved it 4 times in a row in under 2 minutes when i first learned this.. right after that i tried one more time and it caaaaant be solved, i come to last step, all of them are aligned correctly, i do the first algoritm but it cant be done... white and yellow suddenly run in circles... whats the trick ? Im gonna cry
@@renatosorsak8946 it was a subtle comment before the last step. When you're solving the bottom (yellow?) You move the bottom with the right hand vs moving the entire cube with the right hand)
Hey buddy its a formula that consists of 4 steps namely r u r' u' even when you get your yellow to face downwards you have to complete the formula which means that you have to finish the whole r u r' u' so try it and all the best
@@wolfzeee823 I was almost crying like a wimp because I couldn't figure out this 2x2 like 2 years ago. I did it in 10 seconds just now. I haven't touched this 2x2 for more than a year.
I just did the white placing like a 3x3 white corner, then did the 3x3 yellow corner swapping and I thank you for the hint about having only 1 yellow corner placed correctly before doing it though. That would probably take me a few hours to figure out. Then just flipped the pieces like you did, but I am used to having the yellow up, so it is inverted. It is easier/faster to see the yellow aligned like this.
Thanks for this video. I've always wanted to be able to solve a standard Rubix cube. My daughter gave me her 2x2 to solve and I found my way here. Now my goal is to be able to do the 2x2 flawlessly, without even thinking, and then I'll move on to a standard 3x3. Thanks again!
j perm i know you wont see this but i just want to say thank you for teaching me and loads of other people solve the 2x2. i recently bought a drift 2x2 from cubelelo, an indian online cube store, i asked my friends to teach me however they were not the best at teaching me, being desperate i decided to go on yt and go to ur yt channel for the 2x2 tutorial, after some days, i got how to solve i can solve the 2x2 from 55 secs to 60 secs. the fastest time i have gotten so far is 43 secs. like i mentioned before, thanks for teaching me, i will now learn how to solve my 3x3 ❤
I spent an hour trying to figure out what I was doing wrong. Thought I was going crazy. It just wouldn't solve at the last step. Turns out one of my corners was flipped. Opened it up to try and fix it and it exploded on me. Couldn't get it back together so went to walmart to get a Rubik 2x2. Solved it my first try. Your tutorials are great btw. Thank you!
For the last step, how do you manage to get the yellow to the bottom right for all of the bottom faces? Because mine are on both the left and right, and I can't solve my cube
Hey! I learned how to solve 3x3 for the first time using the Yao method. It also works for this one especially at the end when you do the corners. I was watching this one just in case I couldn't solve it. I was half way and then I realized 😮 I think I know what to do. By doing the elevator corner move I solved it in a matter of seconds. Great videos! ❤
When you see that it's actually a "circle", you'll understand. I don't mean to make it sound more complicated, but if you heard him say that "you may have to do this up to five times..." it's because the sixth time brings you right back where you started. There's an even faster way if you just went left instead of right, but the purpose of his video was to keep it as simple as possible (one algorithm). I teach WITHOUT using algorithms. I want people to see what the "algorithm" is actually doing to the pieces. Cubing is a blast, 7x7 is my next challenge! Have fun, and good luck!
Thank you so much, J Perm! My brother had messed up my 2x2 Rubik's Cube, and I didn't know all the steps, and so your video helped me tons to solve my cube. Thanks!
NO WAY THANKS JPERM I DIDNT HAVE TO GO TO THE 3RD TIP I JUSTS FINISHED IT FOR SOME REASON AT THE SECOND PART THANK YOU VERY MUCH YOU HELPED ME DO MY FIRST TIME
I've been able to do 3x3 for so long using certain algorithms, but always had to use the cheat sheet for 2x2. Watched 2 minutes of this video and realized it is all the same. Boom, solving 2x2 in minutes with no cheating. Thank you good sir.
I got a new 2x2 for Christmas and I tried solving it. This method is exactly like the beginner method that I used for my 3x3 when I started cubing. LOL
Omg, for years ive been trying to figure out how to switch the last two corners that were side by side consistently... I never thought to move them so the two i had right were wrong and only one was right. Thank you so much. I could always solve it but only after messing around with it and stumbling into it.
Thanks a lot J Perm!!! I've had rubik's cubes for several years now but I could never solve them (got them back in middle school when my friend could solve them lightening fast and I thought it was the coolest thing in the world) so I gave up. Now I think I'm on my way to mastering the cube ;)
I just bought a 2x2x2 and 3x3x3 and a few hours ago ive learned to solve the 3x3, did it like 5 times already. And surprisingly 2x2 is pretty similar with 3x3 where the 3x3 needed 4 algorithms, the 2x2 only needs 2. Will try it tomorrow
xXSeanCuber22Xx i think he should do an ortega tutorial but cll is just this method but the last layer is one alg. (Also first layer is done differently)
Thanks mate! Nice to see the same "basic" algo applies as 3x3 cube. We're only solving the corners of a 3x3 essentially, so use the same algo as corners of 3x3. It's all making sense now. Only been cubing for 1 week. (following your vids brought solving 3x3 time down from 25+ mins to avg 5 mins in 1 week) Loving the challenge of getting better, and feel fairly confident that the basics can now extrapolate to any cube size....
Thank you JPerm just got my yj mgc elite 2x2 and after one follow thru with you I have learned how to solve. Btw I ordered it bc of your review and I love how buttery smooth it is and how well the tensions are out of the box.
I'm so lost! What does "Get 4 or 1 correct" mean at 3:37? As in 2 colours are right spot and match up, or 3 are right and match up on 1 side? Hard to explain! But also hard to follow. I could only solve Step 1.
![Twenty One Pilots - “The Line” (from Arcane Season 2) [Official Music Video]](http://i.ytimg.com/vi/E2Rj2gQAyPA/mqdefault.jpg)
If the last step doesn't work:
- Make sure you turn the bottom face instead of turning the whole cube to get the next piece
- Finish the 4 moves (don't stop at 3)
If you still manage to solve the yellow side but ruin the white side, you might have a twisted piece that you will have to fix by twisting it or taking the cube apart.
(To know for sure, the last step requires you to repeat the 4 moves either a total of 6 times or 12 times. If you get a different total, like 8, then you need to physically twist a piece)
I dont get it?
Thanks for making all video
Thank you this is exactly like the 3 by 3
Is there an advanced 2x2 method that you have a tutorial on?
Watch my 2x2 playlist! it starts with the Ortega method
This is actually remarkably similar to solving a 3x3
I agree, but it's shorter
Woofle Gaming I agree especially the four moves
@@akatsui6000 it's like solving only the corners in a 3x3
its first corners and last layer
if you can solve a 3x3 you can appy the same method to solve a 2x2 because 2x2 is just a 3x3 without edges
*Who else is watching without a 2x2x2 cube?*
me
Can just do 2x2 on a 4x4 xD
@@hehh7161 yes i do
*Who else is watching this on a 2x2x2 cube?*
me
(Edited)
Nah I’m not like that, the original comment said
Who’s knows how to solve a 3x3 but is watching a 2x2 video
Mustafa Khedapa i know how to solve them both but I’m trying to find a quicker algorithm
@@s-acuber1182 Then you should watch his links in the description for more advanced ways to solve. His videos are always really helpful
Me
Meeeeee. 😁
Me
I'm kind of embarrassed to say I can solve an 8x8 but it has been so long since I solved a 2x2 I had to look up a tutorial. A word of advice for anyone who is trying to learn bigger cubes, about once a month go back and solve every cube you have, it is worth it. Trust me.
😢
😢
😢
😢
A 2 by 2 is literally the same as a 3 x3 and 4x4 and probably higher I only solved a 4x4 so idk. How did u forget how to solve a 2x2 lol.
Timestamps :D
*First Layer :-*
# 0:04
[ Sequence of moves → R U R' U' ]
*Second Layer :-*
# 3:00 Align Top Pieces
# 4:47 Flip Top Pieces
Hope it helped👍
Tnx
Hi
You are the real MVP
Thank you
Thx
0:04: first layer
3:00 Align top pieces
4:48:Flip top pieces
5:02 Repeat algorithm and solve the cube
Thanks
Ty
@@ckblahblah4454 Google says it can translate this.
The heck is it gonna translate ty to
@@Existentialism8820 goggle do be on weed?
@@diamondwastaken2092 🤣
Dude, this is the best 2x2 tutorial I've found online. You make the 'theory' simple, and aren't just focused on "memorize these 9x moves and repeat them until you have achieved success". I was actually able to "look at the cube", find the colour I wanted, and was able to "move it" where it needed to be thanks to you! Appreciate this!
exacly. so true
I solved a 3×3 with the help of his vid and today my mom got me a 2×2 and solved it within 5 mins watching this vid 😃😃
@@virgilvandijkfan8473 Nice
@@NovaaZR thank you!!
every tutorial on solving any cube is confusing (including this one)
2x2 in hand. With 2 kids on either side. They were so happy to see it solved! ❤ years later, this video is still helping people, thanks.
❤
Npc ❤
@@brasen7672you’ll die alone❤
@@brasen7672may they find you cold❤
@@brasen7672May you be found years later fused to your couch❤
Woah this took such a long time for me but i finally solved my first rubik's cube even though it's only a 2x2 cube. Thanks so much!!
Which is still great
Good for u my G
TANUSH K P well du I mean that’s the hardest one.
Keep it up
the 3x3 is easier than the 2x2
Say’s blue: *points to orange*
Say’s orange: *points to blue*
LMAO
Says*
Says*
Btw so true lmao 😂
sucks to be colorblind
That’s what I thought lol
Visible confusion
i cant believe Mcdonalds gave out official Rubik's in their happy meal, this shit is the best.
Lol 🤣 that's where I also got mine too.
that one is garbage the one i bought for like 5$ somehow outperforms it. if its free then its a miracle
@@mallusaih This is why no one invites you to parties. It was a free cube and for some of us, it was the first cube that we solved.#keepitpositive.
@@cozzihoffmaann My friend got a one from McDonald’s and he got bored so he gave it to me. I did my first solve on that and was determined to get better. So I learned 2-look oll. But since I felt like it held me back I got a 5 dollar cube (which was way better). If it was not for that cube I would not be into cubing nor even be watching this video rn
sell that rubik's brand shit and buy a none rubik's brand because rubik's brand sucks
Who else is using a 4x4 as a 2x2?
Me
Mind readeeer
Me😂
I’m gonna use 4x4 as a 2x2 when I get one but I already have a 2x2 lol
Me
Other cube tutorials: 50000 hours long
J perm: 0.01 seconds long
Xander Divinagracia yep
Yessir, i loved the last part how he just turned it and like solved it.
His is 6:11 sec actually and others are 15-30 min
@@tujcaa ...
But it is also sometimes pretty hard to understand
Everyone else: succeeded
Me:
Can’t even solve the first step and crying and having a meltdown
Edit: Now listen here virgins I dont have a 3x3, so pls stop telling me to solve a 3x3 😭
Justin yay to you
Don't worry it took me 3 weeks to solve my first 3x3. You'll have it in no time. Take it from a cuber who's done this for 3 years
Aiden Kim I had my rubiks cube for a year and solved in just yesterday
Me too
When I solved it the first time everything became easier and now after a couple days I’ve memorized the algorithm and can solve it in a couple of minutes
I struggled with 2x2 for a while years ago and now I'm back into puzzles I checked this out after learning to solve a 3x3 with your tutorial in under 2 minutes. As soon as you started teaching the algorithims and I was able to notice they were the same as corner solves and corner orientations for the 3x3 I got it in under 30 seconds. 4x4 next for me!
Good luck! Are you still into puzzles?
Yeah a 2x2 is just a 3x3 but without edges and centers, only corners.
@@BloonPlays Not so much. Went 7 or 8 months or so without solving a cube and recently went back to see if I remembered. The solutions are engraved into my memory like a traumatic childhood incident now
@@hakkentosh i imagne you have the 4x4 down by now. just 3 extra algorithms to remember. edge swap, oll parity, and pll parity
I just returned to cubing with a 2x2 and took a break from 3x3
Who else is doing this on a 4×4 cube😂
Me
Me Right now.
Me too
I am in
Me
Hands down the absolute best 2x2 instructions!
I love that the video isn’t filled with a bunch of crazy algorithms. Very straight forward easy to remember patterns. Cheers
how is it easy
It is a good video I am just bad at this
Sometimes it doesn't work
@@wasnexhere I imagine if you haven't learned 3x3 this might be a bit tricky. Coming here after getting a 29 second on the 3x3 and this 2x2 is extremely simple. Basically cause it's the same as the 3x3 but with a fraction of the steps. So if you haven't done 3x3 I could see how it would not be so easy. Hang in there though, eventually it all becomes very easy.
@The Slow Cuber - Rubik's Cube Tips and Tricks i figure it out now, i can solve it an average of 12seconds
who else watched this when they already knew how to solve it?
Almost everyone
I already know how to solve one of these things, but I doubt my method's optimal.
I know ortega, but hey its another video from j perm.
Me
Who doesn't know to solve a 2x2 here??
If you left dylan in a room with a 2x2 and a 3x3 with a non cuber. When they step out, there will 1 more person to the cubing community
@@yoruba7807 oh geez
Its_Rad omg your English is horrible
Eye Shoot no he’s not he has just messed up and said than instead of then
@@h0m1ess boi he only made a typo
What? If someone, a 2x2, and a 3x3 were with me they'll be 2 jumbled up cubes with 1 face completed on each... Only 1 face
Who else is solving with a 4x4 to save money?
😂me
Me 😂
not it
I still don't know if i want to buy if so I'm solving with the corners of a 3x3
Me😂😂
The steps are kind of similar for the 3x3
Beacuse a 2x2 is a 3x3 without edges and centers ;)
It's the beginner's method
You're right
vireees like literally
Kind of?
Here’s how I solved it,I bought a new cube
Trent Rensburg you gonna cry?
Kinda smart but you don't really know how to solve a Rubiks cube
Trent Rensburg sad to hear. Go fuck yourself. People like you are fucking annoying. Who cared if he copied a comment. Maybe he didn’t see it
you are genus mann
Lame
I know the beginners method for the 3x3 and I was able to figure out how to solve the 2x2 but it was taking me a longer time. Your tutorial really helped. Thank you! ☺️
its really similar that i didt have to watch the whole vid to solve bec i had a idea of what to do
Same
Who is using a 4 by 4 and only turning half of the cube to make it seem like a 2 by 2😂
Meeee😂😂
The last step is making my cube go around in circles!!!
Yeah, i solved it 4 times in a row in under 2 minutes when i first learned this.. right after that i tried one more time and it caaaaant be solved, i come to last step, all of them are aligned correctly, i do the first algoritm but it cant be done... white and yellow suddenly run in circles... whats the trick ? Im gonna cry
@@renatosorsak8946 it was a subtle comment before the last step. When you're solving the bottom (yellow?) You move the bottom with the right hand vs moving the entire cube with the right hand)
Hey buddy its a formula that consists of 4 steps namely r u r' u' even when you get your yellow to face downwards you have to complete the formula which means that you have to finish the whole r u r' u' so try it and all the best
I learnt all this is 10 minutes!
Thanks J Perm!
I learnt this on a 3x3
@@wolfzeee823 try this scramble U,R,D,U,M,B just kidding
@@wolfzeee823 I was almost crying like a wimp because I couldn't figure out this 2x2 like 2 years ago. I did it in 10 seconds just now. I haven't touched this 2x2 for more than a year.
I just did the white placing like a 3x3 white corner, then did the 3x3 yellow corner swapping and I thank you for the hint about having only 1 yellow corner placed correctly before doing it though. That would probably take me a few hours to figure out. Then just flipped the pieces like you did, but I am used to having the yellow up, so it is inverted. It is easier/faster to see the yellow aligned like this.
Who is watching this in 2024
Me❤❤❤😢😢😢😢😢🎉🎉🎉😮😮😮😮
Me too and watching this with my mom.
Me because I forgot how to solve it again after 2 years
Me
Me
I recently just solved the 3x3 (Thanks to you!!) so I've bought a new cube being a 2x2 and I have just realized how close to a 3x3 these moves are.
Thanks for this video. I've always wanted to be able to solve a standard Rubix cube. My daughter gave me her 2x2 to solve and I found my way here. Now my goal is to be able to do the 2x2 flawlessly, without even thinking, and then I'll move on to a standard 3x3. Thanks again!
begginer method:
Step 1
Me: Yeah no
Snarka I saw you comment on jacksucksatlife
I watch jperm and jack too... The world is small
Bruh ur stupid
j perm i know you wont see this but i just want to say thank you for teaching me and loads of other people solve the 2x2. i recently bought a drift 2x2 from cubelelo, an indian online cube store, i asked my friends to teach me however they were not the best at teaching me, being desperate i decided to go on yt and go to ur yt channel for the 2x2 tutorial, after some days, i got how to solve i can solve the 2x2 from 55 secs to 60 secs. the fastest time i have gotten so far is 43 secs. like i mentioned before, thanks for teaching me, i will now learn how to solve my 3x3 ❤
thats amazing :)
I spent an hour trying to figure out what I was doing wrong. Thought I was going crazy. It just wouldn't solve at the last step. Turns out one of my corners was flipped. Opened it up to try and fix it and it exploded on me. Couldn't get it back together so went to walmart to get a Rubik 2x2. Solved it my first try. Your tutorials are great btw. Thank you!
That was one hell of a ride
Is it just me ? When ever I solve a rubix cube I get really exited
same
nah man its not just you
Its every human ever
used to be me when I just learned how to solve a Rubik's cube, now I'm a speedcuber who solves a 3x3 in 22-27 seconds
because you accomplished something and you get a hit of dopamine
For the last step, how do you manage to get the yellow to the bottom right for all of the bottom faces? Because mine are on both the left and right, and I can't solve my cube
exactly. This was a good explanation until that moment
Same issue here
just turn the whole cube, jesus christ
Hey! I learned how to solve 3x3 for the first time using the Yao method. It also works for this one especially at the end when you do the corners. I was watching this one just in case I couldn't solve it. I was half way and then I realized 😮 I think I know what to do. By doing the elevator corner move I solved it in a matter of seconds. Great videos! ❤
First Layer: R U R' U'
Last Layer:U R U' L' U R' U' L
Thank you, no idea why the ude didn't put It on the video
lol does this actually work bruh
I've been told by 8 people on RUclips to get to know my cube.....
I have for the past 4 hours and my cube still be looking like a cat fight😂😂
big rip. I recommend writing down the algorithms and try to do your cube like that
When you see that it's actually a "circle", you'll understand. I don't mean to make it sound more complicated, but if you heard him say that "you may have to do this up to five times..." it's because the sixth time brings you right back where you started. There's an even faster way if you just went left instead of right, but the purpose of his video was to keep it as simple as possible (one algorithm). I teach WITHOUT using algorithms. I want people to see what the "algorithm" is actually doing to the pieces. Cubing is a blast, 7x7 is my next challenge! Have fun, and good luck!
ruclips.net/video/otWrss6E0zQ/видео.html worth try this,won't be disappointed :-)
Lol
Thnx brooooo.....I learned both 3x3 and 2x2 from you....ur the bestttt🥳🥳🥳
legit solved in first try below two minutes because the algorithms are similar to a 3x3 which I have already solved.
Rockstar! Not only two simple moves that work, but the equally critical things to do and not do to maintain orientation between moves. Appreciated!
Thank you so much, J Perm! My brother had messed up my 2x2 Rubik's Cube, and I didn't know all the steps, and so your video helped me tons to solve my cube. Thanks!
Me too
Classic brother move :)
NO WAY THANKS JPERM
I DIDNT HAVE TO GO TO THE 3RD TIP I JUSTS FINISHED IT FOR SOME REASON AT THE SECOND PART THANK YOU VERY MUCH YOU HELPED ME DO MY FIRST TIME
I've been able to do 3x3 for so long using certain algorithms, but always had to use the cheat sheet for 2x2. Watched 2 minutes of this video and realized it is all the same. Boom, solving 2x2 in minutes with no cheating. Thank you good sir.
I got a new 2x2 for Christmas and I tried solving it. This method is exactly like the beginner method that I used for my 3x3 when I started cubing. LOL
Omg, for years ive been trying to figure out how to switch the last two corners that were side by side consistently... I never thought to move them so the two i had right were wrong and only one was right. Thank you so much. I could always solve it but only after messing around with it and stumbling into it.
I still don’t get how to solve it.
Me watching to solve a 2 by 2 using a 4 by 4 cube
Bruh
Same
same lmfao
I’m just using my 10x10 because why not
Lol😂😂😂
I learned how to do 3x3 from you like 3 days ago, and i decided to expand my knowledge and do 2x2. Thanks for the great tutorials
same but after I learnt 3x3 but I realised he used a lot of algrothim that you use in 3x3 too
Thanks a lot J Perm!!! I've had rubik's cubes for several years now but I could never solve them (got them back in middle school when my friend could solve them lightening fast and I thought it was the coolest thing in the world) so I gave up. Now I think I'm on my way to mastering the cube ;)
I had no idea how to solve a 2x2 until today. Thank you and keep up the good work!
Me who solved it by accident trying to do the first step: 😂
I just bought a 2x2x2 and 3x3x3 and a few hours ago ive learned to solve the 3x3, did it like 5 times already. And surprisingly 2x2 is pretty similar with 3x3 where the 3x3 needed 4 algorithms, the 2x2 only needs 2. Will try it tomorrow
What I’ve realized is that the last layer is just a battle for how long you can try to solve it without using PLL lol
I can't I gotta use PLL
@@divac442 me too
I know I’m late (this was currently made a year ago), but this really helped me! Thank you. 😊
Same for me!
After messing up three times watching this video over and over again, I have completed my first ever Rubik’s cube. Thank you for making this video!!
Thank you❤❤❤ completed🎉🎉🎉
People using 3 by 3 steps👇
I figured out the 2x2 on my own in like 30 minutes when I first got one so I want to see if J Perm does it the same way
Anyone already know how to solve the cube with Ortega, cll or something advanced
Me
I learned Ortega today
What’s Ortega?
@@isaacbttm9218 I did last night
Yup
Aayush sharma ❤
You helped me solve my first rubix cube today! It took about 3 hours… but I was pretty happy when I finally nailed it! 😅
Can you do advanced cll/ortega tutorial?
xXSeanCuber22Xx i think he should do an ortega tutorial but cll is just this method but the last layer is one alg. (Also first layer is done differently)
cll has 40 cases i think so no
@@rotiv8598 he has a coll tuturial
he might make a cll tutorial but i probably wont use it cos im fine averaging sub 5 with lbl and ortega
@@schmack221 he has an ortega method vid
BSK Cuber i said that before he uploaded that 😑
I am having trouble with the 1x1. Could you help me out with a tutorial?
I'm struggling with the 0x0.
i love how its basically an easier 3x3 easy algorithms i like that
Thanks mate! Nice to see the same "basic" algo applies as 3x3 cube. We're only solving the corners of a 3x3 essentially, so use the same algo as corners of 3x3. It's all making sense now.
Only been cubing for 1 week. (following your vids brought solving 3x3 time down from 25+ mins to avg 5 mins in 1 week) Loving the challenge of getting better, and feel fairly confident that the basics can now extrapolate to any cube size....
British
I am watching this cause I use 4x4 as 2x2
Same
same
not same
This beginner method is so much better than the other one that I saw. Thanks as usually Jperm for the quality vids.
True!!! It's was actually like solving 3×3 without focusing on the cross and stuffs--- 😂
Yo man, you taught me how to do my 3x3 and I'm back a year or so later to learn a 2x2. Thank you for the work you do, it's really appreciated.
tip: on the last step if the yellow faces towards u do the algorithm backwards
This is by far the easiest memorizable solution I have ever come across for 2 x 2. Thank you!
Ive never realized how much the 2by2 and 3by3 had in common for solving.
It's just the corners of the 3x3
Bro legit speaking u are the best cube teacher on the whole youtube no cap there might be someone better but in my point of view u are a legend man
Woaj at 1:53 he switched up orange and blue, trippy
Lol, I see what you mean
Caleb Raphael lol
I found this video confusing 😂🤦♂️
Jonathan Madi Roblox can you not be so rude
Jonathan Madi Roblox pls don’t be rude you can say it nicely you don’t need to call me stupid
This guy is not good cause he talks nonsense
@@TheLetterJ13 his directions are bad
J M Roblox I swear ur gonna be an entitled parent
i solved it at 4:45
what does he mean by correct pieces
Me too
smae
@@aharrypotterfan5951the corner under it has the same colors as the corner above
Nice i learned
So essentially like a 3x3 except no edge solving, gotcha!
3:57 what if 2 in correct spot?
Than u want to flip the top face so u only have one
@@electricityopens9128 that only gives me 2 or 0
@electricityopens9128 You cant always do that
@@PavleT012yes youcan
I can’t believe it actually worked 😂🔥🔥
I don’t know what I expected but this is literally just the 3x3 beginner strategy… but for 2x2. Nice!
What if the yellow is in the bottom left corner instead of the bottom right? 5:28
There just has to be a yellow there it doesn’t where
But I just have to do it like did the right?
Thank you JPerm just got my yj mgc elite 2x2 and after one follow thru with you I have learned how to solve. Btw I ordered it bc of your review and I love how buttery smooth it is and how well the tensions are out of the box.
i love ur vids bro keep it up man
Who else learned to solve a 3x3 with beginner cfop before you learned to solve a 2x2….. no one just me?
me when i see this:why we going so f**king fast
I average 5 seconds on 2x2 and I'm watching this... Anyone else?
Easy. It’s a Jperm Video.
Yep bcz it is jperm's video
Master of the Lollipops same but I average 10 sec
I average bout 6-7 but yeah.
Why can’t I find a tutorial that makes at least a little sense
I know rightttttttt
This is a piece of cake when you decide to learn the 2x2 only after the 3x3. Too easy 😅
the confusion i feel right now- one of my younger sisters messed up the others cube and now i have to fix it lmao
🤣🤣
What do u do when u have the 2 or 0 corners are correct but when it doesn’t allow u to have 1 or 4 right corners
Do left side up
Top right
Left side down
Top left
Turn cube left
Right up
Top left
Right down
Finally someone who can actually explain stuff good unlike HowToWeekly
Advanced megaminx tutorial please thanks! BTW I’m the kid who let you use my mega minx at UBC open 2019 comp!
wow that must have been noice
wjoa 2 videos in under 30 seconds
I'm so lost! What does "Get 4 or 1 correct" mean at 3:37? As in 2 colours are right spot and match up, or 3 are right and match up on 1 side? Hard to explain! But also hard to follow. I could only solve Step 1.
I don't want to just copy algorithms, I want to understand what I'm doing!
It’s means that you have to get all 4 corners in the right spot or only one. 3 correct corners and 2 corrects corners won’t work…
W tutorial 😮😮😮😮😮😮😮
NOT first!
I just watched this to give him an extra view
I feel like learning the 3x3 over again
Like I can solve the 3x3 in 45 seconds, but I don’t know how to properly solve the 2x2
😭
now you can fix both congratz
this was 4 months ago i can solve 3x3 in 20 sec and sub 7 on 2x2 im so pround not really
I didnt learn with a tutorial and ik how to solve it (learned 3x3 first)
I recently got a 4x4 cube and learned how to solve it so I decided to use it to learn how to solve a 2x2 just for fun 😊