Can-Am Outlander Synthetic Winch Rope Install step-by-step guide
HTML-код
- Опубликовано: 6 сен 2024
- In this one I install a synthetic rope onto the Can-Am outlander 850 XMR if you have any questions leave them in the comments below thank you for watching
As an Amazon Associate I earn from qualifying purchases
Synthetic Winch Rope: amzn.to/3JAnx6D
TOOLS I USE!!!
DeWalt Impact/Drill Combo: amzn.to/3F0m5sF
T-Handle Allen and Torx: amzn.to/3KTHRSF
Bike Stand: amzn.to/3Zyig5Q
amzn.to/3ZFf34y
Tire Spoons: amzn.to/3mtIoRb
Rim Saver: amzn.to/3ZJTRKq
Oil Filter: amzn.to/3naHyco
Can-Am Oil Change Kit 0W-40: amzn.to/40hSVgW
Can-Am Oil Change Kit 10W-50: amzn.to/3ZYrzg4
ATV Cover: amzn.to/3LcLmUh
Synthetic Winch Rope: amzn.to/3JUHgPx
Alot more work than I expected. Gonna give it a try today, but outside, in a blizzard
Try the decafe coffee, it would make watching your videos easier.
Add me to the lost of people hating the design and winch that comes on these machines. The pocket the winch is installed doesn’t allow one to watch the line spool. Can’t see it to guide it in properly so it gets kinked and breaks prematurely. Also, the HD winches are cheap and die prematurely, and the solenoid is poop as well. I had dealer install an hd3500 in 2020, on my 650 xmr and it died after a few uses.. Just bought a new one because it installs easily, but don’t expect it to last. Thanks for the video. I wasn’t sure how to deal with the front of the plastic skid plate cover and now I know. Also, thanks for naming the fastener sizes.
Thank you for your videos. Very informative. I have a new winch and it’s just about a year old. It’s used for plowing. And cable broke. Going to fix it tomorrow. But am really pondering getting synthetic rope. Don’t look like it’s bad to change out. Thanks again for the video.
What happens when you get to the very end of the line that eye let will not hold
Should always keep 6 to 8 wraps on the spool. That puts the load on the spindle not the cheap and point of failure eyelet. Secure point just keeps it tidy.
@@Jerrys_missing_finger in my opinion several wrappings is ok but will also hold not too much. Best will using the right rope size so it fits in the holes, but if not i would go for a half hitch, because so you are automatically press the rope underneath and you have some more friction which prevent slipping of the spool.
That was a good video
🔥👍
I think a 3/16" rope might have fit through the drum holes. If it had fit, would you have threaded it through all the holes like the original steel cable? Do you think the set screw and friction would have been enough to hold the rope securely?
Yes, if you get a smaller rope and passes through the same way as stock, you will be just fine
Awesome video. Did the “fair lead?”” come with the cable ?😊
What size thickness was the synthetic rope u installed? Great Video Man👍
I heard if u use 3/16 thickness you can put 50 feet on but if you use 1/4 only 40 feet……but not sure
I’m pretty sure it was the quarter inch I was installing
Awesome🤘
Nice shop!🤘🤘
I have a 2024 Outlander 700 xt and I'm taking out the steel cable and installing synthetic rope but I forgot to measure the distance between holes for the bolts for a new hawse fairlead. Do you happen to know that measurement on the new gen3's? Thanks.
Max, i have a 23 850XTP and Im following your steps. Does the cover just pull back to gain access to the winch mounting bolts? I removed the bottom 2 but it feels like I will break it pulling it away. How does the cover pull back after removing the bottom 2 bolts?
I’m into the same problem here atm, how did you got about taking the winch out?
That's what I'm putting on mine. Cable breaks alot .thanks
👍
Just replaced the cable after very light duty twice. It was already starting to kink etc. My new rope is already showing signs of wear? I bought Hunter 3/8. Should I have bought heavier? Also, it's a 2022 650 XL and only has 18hrs on it, I added a plow recently and the button for in & out is backward. In is out, out is in, can I simply change a connection, if so where would I.
3/8 as a pretty heavy rope maybe check your fairlead and make sure there’s nothing sharp or gouges that could be causing premature where… as for the old is in and in his out you can simply change the two power cables going to the winch swap them over👍
Could have wound the new rope on by pressing the out button and instead of in as well. I Done that before lol.
Newbie here. Can I use synthetic cable if I have a snow plow?
Great video. Informative and to the point. Did you put the red paint near the end of the cable to mark the unspooled end or did it come that way?
The rope I used came that way
Is this the same installation as on a 2022 Canam 650 MAX Outlander?
Yes
Nice job!
Thank you the support means a lot👍
What size fairlead do I need to match the holes of the old one
I don’t know never check the measurements just installed the one that the dealership sold me for my machine
i lost one of the screws for the mount any one know where i can order some more?
I would try taking one of the other ones to the hardware store. And see if they can match it up.
Synthetic Winch Rope: amzn.to/3JUHgPx
Your going to make someone mess their quad up by leaving the battery hooked up they going to watch you and thinks its ok should have been the first thing you did pretty much 🤦
If you understood what you’re talking about at all you would know there are no power going to those cables