Thank you for making the video, I would like to add two points, (a) the plastic trim running along the sill is lower than the metal jacking area of the sill, so when you placed those jack stands under the sill you must have distorted the plastic trim. (b) No need to use pliers to remove plastic covers off wheel nuts, there is a special tool in the vehicle made of plastic shaped like large tweezers for pulling those covers off without marking them.
Thank you making a beneficial set. Of Videos about the xc 40. I own one with T5 r-design too. Wondering is there anyway to physically inspect the engine oil to ensure the workshop really do engine oil replacement.
Thanks! Since XC40 doesn't have the dip stick you can partially unscrew the drain bolt, let some oil drip into the container. If it is light and clean, it was replaced. If it is black, it was not replaced. I believe the drain plug torque is 28 ft/lbs.
Еще бы передние и задние тюнинговые накладки на бампера как самому установить и где заказать, можно дешевле ,цена в салоне 2000 евро и сервис , руки из заднего места.
TOOLS REQUIRED:
1. TIRE TREAD DEPTH GAUGE - GODESON 88702 Smart Color Coded Tire Tread Depth Gauge - amzn.to/3IMlcpG.
2. NEEDLE NOSE PLIERS - Facom Straight Half-Round Long Nose Pliers - amzn.to/3ESNhJZ.
3. 19MM SOCKET 1/2" DRIVE - GEARWRENCH 1/2" Drive 6 Pt. Deep Impact Socket, 19mm - amzn.to/3Zfwp7W.
4. BREAKER BAR - GEARWRENCH 1/2" Drive Flex Handle/Breaker Bar, 24" - amzn.to/3IhgQp6.
5. 1/2" DRIVE TORQUE WRENCH - GEARWRENCH 1/2" Drive Micrometer Torque Wrench, 20-150 ft/lbs. - amzn.to/3I6ja3p.
6. WHEEL CHOCKS - MAXXHAUL 70472 Solid Rubber Heavy Duty Black Wheel Chock 2-Pack, 8" x 4" x 6" - amzn.to/3DTPyDZ.
7. FLOOR JACK - Pittsburgh 3 Tons Aluminum Racing Floor Jack With Rapid Pump - amzn.to/3JHEttC.
8. JACK STANDS - Pittsburgh 3 Ton Light Weight Aluminum Racing Jack Stands, Set of 2 - amzn.to/3RwdS4x.
Thank you so much for the XC40 videos. I have a T4 in Thunder Grey and it's really helpful.
Thank you!
Thank you for making the video, I would like to add two points, (a) the plastic trim running along the sill is lower than the metal jacking area of the sill, so when you placed those jack stands under the sill you must have distorted the plastic trim. (b) No need to use pliers to remove plastic covers off wheel nuts, there is a special tool in the vehicle made of plastic shaped like large tweezers for pulling those covers off without marking them.
Thank you making a beneficial set. Of Videos about the xc 40. I own one with T5 r-design too.
Wondering is there anyway to physically inspect the engine oil to ensure the workshop really do engine oil replacement.
Thanks! Since XC40 doesn't have the dip stick you can partially unscrew the drain bolt, let some oil drip into the container. If it is light and clean, it was replaced. If it is black, it was not replaced. I believe the drain plug torque is 28 ft/lbs.
Is there a TPMS sensor that needs to be reset?
У меня такие же диски летние
What about TPM? Due to the new tire b position
Еще бы передние и задние тюнинговые накладки на бампера как самому установить и где заказать, можно дешевле ,цена в салоне 2000 евро и сервис , руки из заднего места.
It's tyre by the way....
It depends on where you live. grammarist.com/spelling/tire-tyre/#:~:text=Tire%20and%20tyre%20both%20mean,the%20sense%20to%20grow%20weary.
@@MorozovAutomotive Australia