Why oh why do the people who lived in your house before you do they use the cheapest screws in the universe? I've spent hours ( in total) getting them out. That's going to help . Cheers!
With the tools that I had a available this was my only option. I broke the drill bit but I manage to drill into the screw enough to use the star bit. It worked!!! Thanks, @tipcentric!!
I have to try this. I have a small stripped kitchen knob screw that needs to be removed immediately. I wasn't sure how to do it other than buy a stripped removal tool which would take another 2 weeks to deliver. That's to long. Thank you MountainAngel
@@tipcentric it took me a few tries since I’m not really sure what I’m doing it’s now a learning experience, but at least now I have this method to use again thanks to you!!
Would somebody please explain this process, step by step for me? Yes, I'm a girl that needs to take out 4 small rusted in screws so I can fix (re-glue) a torn speaker cone.
My elderly mum just had some bloke replace some door handles today. On closer inspection a lot of the screws he put in have the screw head absolutely stripped/destroyed. It looks like he actually drilled out the screw heads! That's not good is it? Seems like a right bodge job to me. Any replies would be appreciated cos I hate seeing my mum ripped off.
There’s a ton of ways to remove stripped screws. Sometimes you can get them out with a rubber band, other times you need a bit more brute force like in this video. You can also buy reverse thread spiral bits to get them out, but the good ones cost a fair bit. I’d try the rubber band method first, failing that, I’d try this method. Then replace with new screws, and either drive them by hand, or make sure your clutch on your drill is set to a low setting to prevent stripping 👍
This actually worked when a stripped screw removal tool didn’t even work, thank you!!!!
You’re welcome! I have tried them removal tools a few times. They do work, but not as well as this method can 👍👍
What size drill bit do you use for that t15?
@@kyleharrison4878 yeah that’s right.
Is it the jn reverse strip it? @@tipcentric
@@TotalWarriorLegendsno, just a Torx bit 👍
LEGEND. I spent 2 hours trying all different methods. This one worked like a charm
Love comments like this! Glad it helped out! :)
I had one striped last week on a ceiling fan light, i was lucky enough to remove it w 4. Inch vise grip
Don't think my Aldi bits could withstand that hammering 😅
Can aldi bits even survive a drill?? 😂😂
@@tipcentric I never strip my screws - my screws strip my bits
@@BlackoutCreatively 😂😂😂👍
@@BlackoutCreativelylmao same
Parkside 😂
OMG! I used masking tape as additional grip and it worked like a charm. Thank you!!
it just ripped off
Worked great today!!! Saved us, Thanks
@@mmonty3438 no problem at all! Glad it helped!
This is the best method. Even for hard to reach places
OMG it worked finally! Thanks!!!
No problem! Happy to help! :)
Tried it and it worked for me. Thanks for sharing it!
Why oh why do the people who lived in your house before you do they use the cheapest screws in the universe? I've spent hours ( in total) getting them out. That's going to help . Cheers!
3mm drill bit and a t15 worked well for me. Thanks
Very welcome 🥳👍
What size t15 please 🙏🏼
@@solinworld632t15 is the size lol
Omg I’ve been googling and buying things and returning things to do this. You made it so easy and quit to the chase. Thank you fr this!!!
no problem at all!! I hope it helps you out! :)
Im at home depot in the parking lot looking for a good stripped removal tool before i go in, and im gonna go home and try this before i buy anything😂
Worked like a charm! Ty,
@@Denih360 glad it helped! :)
Excellent DIY hack ....it worked . Thanks !
You're welcome!
With the tools that I had a available this was my only option. I broke the drill bit but I manage to drill into the screw enough to use the star bit. It worked!!! Thanks, @tipcentric!!
most welcome! :)
It worked!!!! Thank you sir!
Most welcome! :)
I have to try this. I have a small stripped kitchen knob screw that needs to be removed immediately. I wasn't sure how to do it other than buy a stripped removal tool which would take another 2 weeks to deliver. That's to long. Thank you MountainAngel
Hope it works!! 😀
THANK YOU SO MUCH👍
Thank you this worked!!
Cheers that actually worked on my cylinder lock screw.
Most welcome, glad it helped :)
This worked amazingly thank you!!!
You're welcome!
It is really working. Thanks
Thanks! This definitely fix a stripped screw on my laptop. 😊
I've actually saved myself a lot of frustration at work with a sharp 3/16 and 3/32 bit and a throwaway star bit
Thank you!!! This worked and the screw removal tool didn’t.
Thanks bro!
@@kravennupe no worries! 👍👍
Tried it and it definitely worked. Saved me so much time. Thank you!🙏🏽
Speed out tool didn’t work. Was getting ready to cut the screw.. tried this and it worked.. wow!
Worked for me! New skill unlocked. Thanks man.
My experience, worked just fine after I bought set of GOOD hex bits.
Great that's good to know
Brilliant, thanks.
Thanks! Did this and it worked!
My dad used this trick to get a stripped screw out from my e scooter, worked perfectly
Awesome! 👍👍
What size drill bit for the T-15. Also is he going forward or backwards.
That's what I want to know too of the size drill bit.
Worked for me and 6 stripped out Phillips ! Thanks
Very welcome :)
what size drill bit ?
Whichever fits
I believe its called a torx
why no manufacturer comes with T16 T 21 T26 etc , now the tolerance is useless because the screws use maximum tolerance too
This just saved me 😮💨
Happy to help! 👍😀
Now do one for a stripped drill bit haha
😂
Will this work for flat head screws?
You're my hero!
Just the proper tool
Like what?
Bien joué comme vidéo mais sans le diametre du foret et la taille de l'embout étoilé, je ne vois pas l'intérêt de cette vidéo pour les néophytes 😂
a little bit smaller than the torx bit.
tnxxx it worked for me!!!
I have a lawn mower shaft with a stripped grub screw. I'll try this when I get the chance! Gotta get the broken ez-out out first
Thank you!! I used this to get a screw stuck in my rc truck chassis. I was starting to get really frustrated lmao
Awesome! I’m glad it helped!! 👍👍
@@tipcentric it took me a few tries since I’m not really sure what I’m doing it’s now a learning experience, but at least now I have this method to use again thanks to you!!
As a person who tried to install ssd card on my ps5 and got screw stripped i call tell if i do that my ps5 will die.
We must make sacrifices to make his screws life living gell
The video is kind of pointless when you don't tell him what size bit to use with the t15
common sense will prevail
yeah its moustly easy from wood shoow us howe to remowe from locking mehanisam
Is that an eighth inch bit?
Its metric, probably a 3mm I think.
Stripped screw turn a 2 hour job into a all day activity
Before doing that, put a small piece of duct tape on the screw and use a manual screwdriver. It turns it right out.
That does not always work.
@@ELScorcho0110yup I already tried that didn’t work screw was too rounded and is still stuck 😂
What are these bits called? I tried everything. I even tried to extraction tools and it does not work.
HI, What size drill bit do you use for that t15?
Impressive.
What do you call this screw?
Thank you perro
Nice, good idea
You dont need to use the drill bit just use a different size screw bit
Would somebody please explain this process, step by step for me?
Yes, I'm a girl that needs to take out 4 small rusted in screws so I can fix (re-glue) a torn speaker cone.
Иногда работает, а иногда бита обламывается. Поэтому надо брать не очень нужную биту.
Worked, you saved my scooter
EN LA TABLITA HASTA MI ABUELITA
Or put a rubber band in it then reverse your drill whilst the end is in the band does the same thing
Did that one in another video. It’s a bit hit and miss, depends how much grab it can get in the screw head and how tight the screw is. 👍👍
Yeah no not always😢
Hey how do I do it for a flat head screw that is stripped?
he used a different bit on the screw🤦🏾♂️
yes, that was the whole point of the tip 🤷♂️
I can't do that with my motherboard 😢
That poor bit. You can see that it's been damaged from (presumably) previous attempts. Still - if you're desperate, I suppose...
Man did not work. I didn’t have 3mm bit though had to use 1/8
Is that a torx bit?
Yeah t15 I think
My screw head had chipped off, how do i remove the screw?
It worked!!!
Did you try it? Awesome! 😀👍👍
fak i have 2 really badly stripped screws, in my windows, I dont see me hammering the drill bit in to get it out x), the windows will smash
What sizes to use though, surely every situation different
What is the size of the drill bet
Please help me without tools technique
My elderly mum just had some bloke replace some door handles today. On closer inspection a lot of the screws he put in have the screw head absolutely stripped/destroyed. It looks like he actually drilled out the screw heads! That's not good is it? Seems like a right bodge job to me. Any replies would be appreciated cos I hate seeing my mum ripped off.
There’s a ton of ways to remove stripped screws. Sometimes you can get them out with a rubber band, other times you need a bit more brute force like in this video. You can also buy reverse thread spiral bits to get them out, but the good ones cost a fair bit. I’d try the rubber band method first, failing that, I’d try this method. Then replace with new screws, and either drive them by hand, or make sure your clutch on your drill is set to a low setting to prevent stripping 👍
Bro just changed that screw's gender
What size drill bit?
That’s smart !!!
I hate these screws. 😤
Which do you prefer?
If this works ur saving me money my friend
Unfortunately, this didn’t work for me. Still can’t get the screw out.
Podrías usar un extractor de tornillos
Wish I seen this about half an hour ago. Just been fucked on a screw for past 20 minutes
Для такой операции нужна бита очень хорошего качества. Как резец по металлу.
Been doing this for years
How about at glass door?
What's the rotation of the drill? clockwise or counter clockwise?
You would want to go the opposite of the screws threads so in most cases, you would go counter clockwise.
@@user-wi3qz6fx6yclockwise while drilling. Counter clockwise when removing. Remember the old saying. "Lefty loosy
.. righty tighty
In the start you used the wrong bit
Im thinking about using this method on an expensive set of balisongs with T-10 screws.
What’s the drill b it size?
I am not doing this to my Steam Deck lol
What size drill bit is that drilling
In screw
2.5mm I think.
What size drill bit
can't wait to do this on my $2000 laptop
Good luck 😬
Даже ногти пострич некогда, весь в делах бедненький
Insert Screw on the Loose
Are you reverse drilling or in forward mode?
forward drill, reverse screw