On this unit, the wire speed is the right knob and left is amps. The display is kind of meaningless. Below a couple of responses to questions left on Amazon might help clarify. ++++++++++ Q: settings For Mig mode 1mm, where should the voltage and current knobs be set? A: Dear Customer, the Voltage knob is used to adjust the speed of feeding wire. For the currents you can start with 5 and adjust to 10 according to the thickness of the object to be welded. By sunny huang in the United States on January 11, 2022 Q: I noticed that there is no wire speed control why is that? A: when u look at the front the wire speed control is the knob on the right that controls your wire feed and the knob on the left controls the amount of heat to penetrate steel. By john… in the United States on March 14, 2022 ++++++++++ And here's a general quickie on V, A and wire speed as it pertains to reducing MIG flux core spatter due to "Incorrect Settings"-- you should be able to understand how this translates to the controls found on the unit in the video: Improper settings Everything has to be right when you are doing flux core welding. One of the first causes for spatter is incorrect amperage settings. The wire feed speed determines the kind of amperage you will be using. If you set too high then you will experience spatter. You can solve this in two main ways - lowering amperage (or wire reducing wire speed) or increasing voltage. You will need to constantly test the welds until you find the right settings.
let me ask a real dumb question? so the ground goes in the positive side and the part you weld with goes on the negative side. or just on this machine.. im very new at this and genuinely asking..
I'm a girl and I really want to learn mig welding to make simple furniture like an exposed metal frame love seat for my studio condo that is puppy chew proof and cat claws proof too
Check out this generator review: ruclips.net/video/jt-rDtqBvi4/видео.html
Thanks a million. I was having some difficulties but your explanations was helpful.
Glad it helped!
Picked one up. Was going to go with a Forney 110v welder but this one has both voltages and at $109 I had to take a chance on it.
I like it a lot.
Thank you very much for the help. It was great video. Big hug.👍
You're welcome!
On this unit, the wire speed is the right knob and left is amps. The display is kind of meaningless. Below a couple of responses to questions left on Amazon might help clarify.
++++++++++
Q: settings For Mig mode 1mm, where should the voltage and current knobs be set?
A: Dear Customer, the Voltage knob is used to adjust the speed of feeding wire. For the currents you can start with 5 and adjust to 10 according to the thickness of the object to be welded.
By sunny huang in the United States on January 11, 2022
Q: I noticed that there is no wire speed control why is that?
A: when u look at the front the wire speed control is the knob on the right that controls your wire feed and the knob on the left controls the amount of heat to penetrate steel.
By john… in the United States on March 14, 2022
++++++++++
And here's a general quickie on V, A and wire speed as it pertains to reducing MIG flux core spatter due to "Incorrect Settings"-- you should be able to understand how this translates to the controls found on the unit in the video:
Improper settings
Everything has to be right when you are doing flux core welding. One of the first causes for spatter is incorrect amperage settings. The wire feed speed determines the kind of amperage you will be using. If you set too high then you will experience spatter. You can solve this in two main ways - lowering amperage (or wire reducing wire speed) or increasing voltage. You will need to constantly test the welds until you find the right settings.
Thanks for the info!
Great video sir
Thank you!
let me ask a real dumb question? so the ground goes in the positive side and the part you weld with goes on the negative side. or just on this machine.. im very new at this and genuinely asking..
Yeah it's weird, just follow the instruction and pictures and it works. Have a great day.
Waiting for mine to come in. Thanks for swift reply.. appreciate you
I'm a girl and I really want to learn mig welding to make simple furniture like an exposed metal frame love seat for my studio condo that is puppy chew proof and cat claws proof too
You can do it!! Have fun!
You'll burn the condo unit down. Have a man do it.
.8 mm is the best size for cheap brand
Thanks
Exposed circuit board. Maybe use that welder to fabricate a cover for that.
I just got one too. My circuit board was covered.
😅
The newer ones do have those wires covered.
@@garylee9738 I agree, just received mine and no exposed circuit board.
@@Warpfield GOOD! Mine is on the delivery truck now so hopefully mine has the covered board also.