Thanks for watching! If you have questions about this printer, leave them below and I'll do my best to answer them. Feel free to check out the printer on Amazon: amzn.to/2ZBTs0P
I got this printer and now running it with Precision color inks and I tell you the colors coming out of it is better than cannon oem and way cheaper too
I plan on printing stickers and low poly large and small images. Looking for something that can print 16- 19 inch in width. Do you have any recommendations
hi , I am interested in this printer or something similar but mostly for graphic work (A3 posters, booklets, brochures etc) I am wondering if it is possible for using it for normal documents aswell? thanks in advance
Could I print watercolour paper through this printer? Does it have to be canon photo paper? I’m an illustrator here so I’m curious about purchasing a printer that can allow me to print different kinds of substrates! Thanks!
Hi! thanks for this very informative review about this, I'm about to buy this printer but I have difficulties choosing between this and Epson L1800. Do you have any suggestion which one I need to buy for printing photos for my business? Thanks!
Hey, Harald! Unfortunately, I never did figure out my problem with B&W prints. Anytime I ever printed b&w they just never turned out well. I’m sorry I couldn’t help you!
@@NickHoeller ok, thank you, that was fast! would you say, that your new imageprograf 300 printer performs much better all in all compared to the pixma pro 100s? what about the consumption/cost of ink, is it a big difference between both models??
Oh my gosh, it is 1000x better! I am more than pleased with the pro-300 printer! I’ll be doing more videos on printing here very soon, including black and white prints with my new printer. Ink seems like it goes down the same amount, maybe a tad more? I’ll be doing more tests for that too!
Hi I wonder if you could help me, I have the same printer but for some reason the ink carriage will not come the middle for me to change the inks it prints as normal but it won’t allow me to change the inks i have tried everything, Thanks
Hey there! I wonder if you would know the answer to this: I am on my 2nd pixma pro and using macOS, many talks with canon trying to resolve my issue with borders, no matter what software I use when i try to get even borders of any size, they end up very uneven on the print. whether i use margins. shrink the image cell or even put a layer over the image with measured out borders. if i set it to 10mm each side, I will usually get 10mm. 8mm, 9mm and 5mm or something like that. have tried on multiple versions of macOS and see here you are using a mac so wonder if you are getting better results. (Both of my printers were doing this, 1st was replaced because they believed it was defective)
Hey Zach! Wow, that sounds like that can be frustrating. Silly question, but have you run a print head alignment test? For me, that usually fixes the problem. Also, make sure the sliders on both ends are always hitting up on the paper nice and snug. Another way I make borders on my prints is by making the actual photo smaller on the paper itself. So, if I'm in Photoshop about to print with an 8x10 photo, I'll go to the scale area and type in 7.5x5 and it'll be smaller on the 8x10 paper, leaving white borders. But this one stumped me! I'm sorry you're having this problem. I appreciate you watching! :)
am i missing something....you state tht the printer is about $350 but with a rebate it can be $99. but when I go to the amazon link you provide for this printer, the cost is crazy expensive....between $690 and $999....what the what the......
At the time I bought it, it was at that price. It was that price because it was someone selling it after they received it as a rebate. So they were up selling it to make profit, but not retail price.
Thanks for the video! 30 to 40 8x20 runs you all the ink? What does that reduce the cost to of each print? I'm looking into getting this printer but it worries me to need to print quite a lot of prints and the cost of the inks not matching up. Thanks!
It does use quite a bit of ink when printing larger photos. I’m not too good with math, so take this with a grain of salt , but you’re looking at around $3 per print with the $120 ink by Canon.
@@NickHoeller Thank you ver much! Yeah, it's a bit pricey maybe for a starter; would you recommend Epson Ecotanks or any printer with less pricey ink to do a good job on quality prints as well? I'm looking to print illustration work, not photography. Or would you say it's the same? I've heard so far Canon Pixma Pro were the best ones for photoprint quality, but I'm not sure if that is also taking art-prints, postcards and digital art being printed too? Thanks a lot!
Hey! Do you think that printing thank you cards with three colors and few graphics (like one) would get a good use out of the ink? Like maybe more than 50 sheets
I can’t find this printer anywhere in Canada, even the cannon website sold out, I’m thinking it’s discontinued, do you know of any other printer in this price range that can print on thick card stock? Like 300 gsm...
The guy at Best Buy told me printers have been hard to obtain since March. The pandemic pushed alot of people to take whatever they could find, where ever they could find it. I'm sorry you're having such a tough time. I found one on OfferUp. A photographer had it in the box un opened! Try Mercari too... Good luck
Check Kijiji. I have seen quite a few for sale. Could be many are selling their pro-100 because they are looking to buy the new Pro-300, although it costs a lot more!
Thank you so much for this video. I do have a few questions. How would this work with sticker paper? Or vinyl stickers and decals? My main use for this printer would be photos and high quality waterproof glossy stickers. Also you mentioned having issues with software. I have a iMac and am concerned about not being compatible as I have read many reviews that canon printers do not work well with iMac. ? Also if one color runs out of ink will the printer continue printing? Or does it stop until you get that color replaced? Is it best to purchase and replace all colors at the same time or whenever they run out? Sorry so many questions. This printer is expensive for my budget and want to make sure I get one that is worth the cost. Appreciate any advice. :)
Hi, Jodi! No worries about all the questions. I’ll try my best in answering them! I’ve printed stickers before with this printer and had no problems at all. I have not had a chance to print vinyl or decals. I also run an iMac and MacBook Pro with this printer and can honestly say I don’t have that many issues with compatibility. Everything usually runs smoothly. As mentioned in the video, I sometimes run into software not printing the correct colors. But it’s an easy fix with re-installing the software. If one color runs out, I believe it’ll still run, but your colors will be off. It’ll keep warning you that your ink is low and that you should replace it. I’d recommend just replacing the ink that ran out instead of replacing all. Overall it’s an incredible printer and highly recommend it! Thanks for watching! 😊
Nick, thanks for responding the questions. It’s not clear to me if we can print vinyls and if it will be waterproof pictures... please advise. THANKS AGAIN Also, did you find the driver to instal the printer on your MacBook Pro? If so, can you add the link in the description of the video? Thankssssa
Anybody have problems of the ink drying out? How long can you usually let it be idle before having to print drafts just to keep it from drying out? I want these to print photos but I won't be printing every week
Hi! I’ve never ran into dry ink problems. Although I’m printing maybe once a week. But a few times I haven’t printed for 2+ weeks and nothing dried up on me.
I agree! Check out my newest video on Canon’s brand new printer. They’ve updated their black ink for incredible B&W prints! ruclips.net/video/sJflovzpcLE/видео.html
In your opinion will this be good for business cards & thank you cards on heavyweight cardstock paper ? I can't really find any reviews about that . As I'm starting a graphic design business I need the best printer.
Hi Brejaun! I have used 14PT card stock postcards and I’ve been pleased with the results. For me, printing photos on them, the colors become a little muted and have a heavy matted look. I guess it would depend on the paper you get. But I wouldn’t go any heavier than 14PT. Lettering is pretty crisp, so I’d think printing business cards would look very nice with this printer! Hope that helps.
Hello guys! I have a little business printing invitations, thank you cards and party supplies for children. I highly, highly recommend the HP laserjet 200. A laser printer is great for high capacity prints. The toner is expensive, but it lasts me several months and to me is so worth it. The prints are so vivid and crisp! I have the pixma printer in this video also and have yet to find a cardstock that it will print nicely on with a crisp and not blury image. It prints nicely on photo paper.
Hi Nick, thanks a lot for sharing this video, It helps a lot. I have a question about as photographer, do you use this printer to print big size for sale or gallery show?
I am a tiny not successful photographer, so I don’t know if it worth to spend this much money to buy this. Just wondering it really gonna help with photography career ? Thanks a lot 😅
Hey! I appreciate it, thanks for watching! I used to sell my images. But I’ve moved all of my prints/ sales to my online shop now. I don’t think you need a printer to help your career. I think you need the printer for self appreciation of your work. Printing your own work is one of the best feelings ever!
I really appreciate you getting back to all the comment questions so I’ll throw in one more for you. Do you know if there’s a custom paper size option where you can print panoramas? I’ve seen some reviews talking about the pro-10 and pro-10s being able to but I can’t find any locally.
Although I’ve never printed panoramas, I believe there is an option to enter a custom paper size in the printer dialog box. I apologize for not helping more!
Hi Nick thanks for this video but can you make also a video how you print ... how to use the borders or now borders ect ect... would be great if you can make it
Hi! I have a video on how to print here: ruclips.net/video/e9bGdZS-2ew/видео.html - I’ll be making a new video here shortly on how to print and matte! I’ll keep how to print with borders in mind!
Nick Hoeller Thanks for replying ok I will keep an eye on your RUclips channel and follow you also so .... thanks also for the video about the smugmug website know bussy with it to set it up 👊🏻
Mine lasted for a little over a year and won't power up. I tried all the stupid things Canon said to try...like hold the on/off button for 20 seconds and you'll be fine. I even replaced the power supply (basically a plug in box) with a known good one. After the printer died, crappy tech support, crazy high shipping fees and the "IF we can fix the problem" is moving me away from Canon for good. I'm not sure I can even trust their cameras any more due to the amount of electronics crammed inside of them. However the print quality was great....while it lasted.
Not gonna this printer is overrated rubbish in my experience. Kept splodging black ink or all the prints, which eventually fixed itself over time. The colours are dull and not all that. It’s now claiming there’s low ink when just just spent a bunch of money replacing the ink cartridges. Piece of tat if you ask me, especially for £360 I paid.
This isn’t a video on the print quality. It’s a review of the printer. I have two other videos that go over the print quality and it’s a brighter environment.
Some examples of printed photos would’ve been good. Ive basically just been talked at for 5 minutes about why it’s good. I could’ve read several reviews on Canon’s site instead.
I bought this printer ruclips.net/user/postUgkxciSwynMJ7PnUvvx11rewiu-yFBkZTl53 to replace an aging HP printer. It is just used for casual home printing so I don't need anything more. Installation went easily though the HP Smart Printing doesn't work well with our laptops - having to select the actual device. Will have to see how the HP Instant Ink program works out. Plus haven't been able to set up printing from smartphone yet - either direct or WiFi
I’ve never printed vinyl, but I have printed stickers before. They didn’t come out too bad. Maybe a little faded, but nothing drastic. There are settings to change that though.
Hey Luke! What’re you expecting from a photo printer? 20-30 full bleed 8x10 photos is A LOT considering this is a photo printer and not your usual inkjet printer.
Thanks for watching! If you have questions about this printer, leave them below and I'll do my best to answer them. Feel free to check out the printer on Amazon: amzn.to/2ZBTs0P
So this printer is not recommend for fineart matt b&w printing?
you should definitely follow Jose Rodriguez when troubleshooting your pro 100 . magenta mask and other color anomalies are very easy to fix
I like the prints from it, B&W or color. I've had it over 9 years.
damn how'd you get it so cheap its like $650 now
i was looking for a comment about this ! Cheapest i see is $400 on craigslist
I got this printer and now running it with Precision color inks and I tell you the colors coming out of it is better than cannon oem and way cheaper too
That’s great! Thanks for letting me know. I’ll have to look into those!
I plan on printing stickers and low poly large and small images. Looking for something that can print 16- 19 inch in width. Do you have any recommendations
Hi. What do you think about PRO-200, especially in comparison of PRO-100?
Good assessment
hi , I am interested in this printer or something similar but mostly for graphic work (A3 posters, booklets, brochures etc) I am wondering if it is possible for using it for normal documents aswell? thanks in advance
Yes you can print normal documents you just have to switch the paper
Could I print watercolour paper through this printer? Does it have to be canon photo paper? I’m an illustrator here so I’m curious about purchasing a printer that can allow me to print different kinds of substrates! Thanks!
Hi! thanks for this very informative review about this, I'm about to buy this printer but I have difficulties choosing between this and Epson L1800. Do you have any suggestion which one I need to buy for printing photos for my business? Thanks!
Would I be able to print quality stickers on this printer?
I’ve printed a few stickers and they’ve turned out nice!
Does it printed on canvas
Hello Nick, how did you solve the problems with b+w prints, that you mentioned?
Hey, Harald! Unfortunately, I never did figure out my problem with B&W prints. Anytime I ever printed b&w they just never turned out well. I’m sorry I couldn’t help you!
@@NickHoeller ok, thank you, that was fast! would you say, that your new imageprograf 300 printer performs much better all in all compared to the pixma pro 100s? what about the consumption/cost of ink, is it a big difference between both models??
Oh my gosh, it is 1000x better! I am more than pleased with the pro-300 printer! I’ll be doing more videos on printing here very soon, including black and white prints with my new printer. Ink seems like it goes down the same amount, maybe a tad more? I’ll be doing more tests for that too!
@@NickHoeller ok, thank you, good to know, that you will do some more videos about the pro 300.
Hi
I wonder if you could help me, I have the same printer but for some reason the ink carriage will not come the middle for me to change the inks it prints as normal but it won’t allow me to change the inks i have tried everything,
Thanks
HI, Thank you for the review, i have a question, if you want to print 5x7 can you do 2 pictures in the same page? Thanks
Sure! Just create a document in PS that is 5x7in, place your photos on it and print how you normally would with the printer! Hope that helps!
I did not know it had head, two eyes. Where do you feed paper anyway?
Hey there! I wonder if you would know the answer to this:
I am on my 2nd pixma pro and using macOS, many talks with canon trying to resolve my issue with borders, no matter what software I use when i try to get even borders of any size, they end up very uneven on the print. whether i use margins. shrink the image cell or even put a layer over the image with measured out borders. if i set it to 10mm each side, I will usually get 10mm. 8mm, 9mm and 5mm or something like that. have tried on multiple versions of macOS and see here you are using a mac so wonder if you are getting better results. (Both of my printers were doing this, 1st was replaced because they believed it was defective)
Hey Zach! Wow, that sounds like that can be frustrating. Silly question, but have you run a print head alignment test? For me, that usually fixes the problem. Also, make sure the sliders on both ends are always hitting up on the paper nice and snug. Another way I make borders on my prints is by making the actual photo smaller on the paper itself. So, if I'm in Photoshop about to print with an 8x10 photo, I'll go to the scale area and type in 7.5x5 and it'll be smaller on the 8x10 paper, leaving white borders. But this one stumped me! I'm sorry you're having this problem. I appreciate you watching! :)
Zach Driftwood , hi try Qimage it’s amazing for doing easy borders and a lot more watch Jose Rodriguez on RUclips
is it good for heat transfer papers?
Can we use canvas to print with this printer ?
Wondering if it would be able to print on vinyl?
Would u recommend over the epson expression hd xp-15000
hi there! i wanted to know how the print lasts - like if you display them, do the inks fade?
I’ve had a few fade if they’re in direct sun. So just be sure they’re not in the direct sun and they should be good!
Hello, thx for explaining in details of pros n cons. One question: is this printer qualified to print good quality canvas for sale online?
am i missing something....you state tht the printer is about $350 but with a rebate it can be $99. but when I go to the amazon link you provide for this printer, the cost is crazy expensive....between $690 and $999....what the what the......
At the time I bought it, it was at that price. It was that price because it was someone selling it after they received it as a rebate. So they were up selling it to make profit, but not retail price.
Thanks for the video! 30 to 40 8x20 runs you all the ink? What does that reduce the cost to of each print? I'm looking into getting this printer but it worries me to need to print quite a lot of prints and the cost of the inks not matching up. Thanks!
It does use quite a bit of ink when printing larger photos. I’m not too good with math, so take this with a grain of salt , but you’re looking at around $3 per print with the $120 ink by Canon.
@@NickHoeller Thank you ver much! Yeah, it's a bit pricey maybe for a starter; would you recommend Epson Ecotanks or any printer with less pricey ink to do a good job on quality prints as well? I'm looking to print illustration work, not photography. Or would you say it's the same? I've heard so far Canon Pixma Pro were the best ones for photoprint quality, but I'm not sure if that is also taking art-prints, postcards and digital art being printed too? Thanks a lot!
Hey! Do you think that printing thank you cards with three colors and few graphics (like one) would get a good use out of the ink? Like maybe more than 50 sheets
I could see getting good use out of the ink! It’s tough to say, but you may get close to 50!
Is it better than epson l800?
Would you recommend this printer for printing labels?
Yes! I print labels all the time with this printer, sharp text and good colors!
I can’t find this printer anywhere in Canada, even the cannon website sold out, I’m thinking it’s discontinued, do you know of any other printer in this price range that can print on thick card stock? Like 300 gsm...
The guy at Best Buy told me printers have been hard to obtain since March. The pandemic pushed alot of people to take whatever they could find, where ever they could find it. I'm sorry you're having such a tough time. I found one on OfferUp. A photographer had it in the box un opened! Try Mercari too... Good luck
As mentioned above, 2nd hand selling apps are a great place to look. I’ve seen a lot on Facebook Marketplace and eBay.
Check Kijiji. I have seen quite a few for sale. Could be many are selling their pro-100 because they are looking to buy the new Pro-300, although it costs a lot more!
Thank you so much for this video. I do have a few questions. How would this work with sticker paper? Or vinyl stickers and decals? My main use for this printer would be photos and high quality waterproof glossy stickers. Also you mentioned having issues with software. I have a iMac and am concerned about not being compatible as I have read many reviews that canon printers do not work well with iMac. ? Also if one color runs out of ink will the printer continue printing? Or does it stop until you get that color replaced? Is it best to purchase and replace all colors at the same time or whenever they run out? Sorry so many questions. This printer is expensive for my budget and want to make sure I get one that is worth the cost. Appreciate any advice. :)
Hi, Jodi! No worries about all the questions. I’ll try my best in answering them! I’ve printed stickers before with this printer and had no problems at all. I have not had a chance to print vinyl or decals. I also run an iMac and MacBook Pro with this printer and can honestly say I don’t have that many issues with compatibility. Everything usually runs smoothly. As mentioned in the video, I sometimes run into software not printing the correct colors. But it’s an easy fix with re-installing the software. If one color runs out, I believe it’ll still run, but your colors will be off. It’ll keep warning you that your ink is low and that you should replace it. I’d recommend just replacing the ink that ran out instead of replacing all. Overall it’s an incredible printer and highly recommend it! Thanks for watching! 😊
Nick Hoeller
Thank you very much for answering my questions. Super helpful!
Nick, thanks for responding the questions. It’s not clear to me if we can print vinyls and if it will be waterproof pictures... please advise. THANKS AGAIN Also, did you find the driver to instal the printer on your MacBook Pro? If so, can you add the link in the description of the video? Thankssssa
Can this Canon print on Cardstock? Was looking into making business cards and stickers. Thanks and endorsed.
I’ve printed on 14PT card stock without a problem!
@@NickHoeller Hey Nick, thanks for the heads up.
Can the ink also be purchased on Amazon? Or is it direct from Canon each time?
Anybody have problems of the ink drying out? How long can you usually let it be idle before having to print drafts just to keep it from drying out? I want these to print photos but I won't be printing every week
Hi! I’ve never ran into dry ink problems. Although I’m printing maybe once a week. But a few times I haven’t printed for 2+ weeks and nothing dried up on me.
@@NickHoeller that's a relief to hear! I'm set on getting this printer!
Bad black and white is a deal breaker. Black and white is the Essence of dramatic photography.
I agree! Check out my newest video on Canon’s brand new printer. They’ve updated their black ink for incredible B&W prints! ruclips.net/video/sJflovzpcLE/видео.html
In your opinion will this be good for business cards & thank you cards on heavyweight cardstock paper ? I can't really find any reviews about that . As I'm starting a graphic design business I need the best printer.
Hi Brejaun! I have used 14PT card stock postcards and I’ve been pleased with the results. For me, printing photos on them, the colors become a little muted and have a heavy matted look. I guess it would depend on the paper you get. But I wouldn’t go any heavier than 14PT. Lettering is pretty crisp, so I’d think printing business cards would look very nice with this printer! Hope that helps.
@@NickHoeller Thanks so much for the response! Definitely will keep that in mind.
Brejaun Lauren Hello, did you end up deciding on a printer ? I’m looking for one for the same reason. Thank you
Hello guys! I have a little business printing invitations, thank you cards and party supplies for children. I highly, highly recommend the HP laserjet 200. A laser printer is great for high capacity prints. The toner is expensive, but it lasts me several months and to me is so worth it. The prints are so vivid and crisp! I have the pixma printer in this video also and have yet to find a cardstock that it will print nicely on with a crisp and not blury image. It prints nicely on photo paper.
Hi Nick, thanks a lot for sharing this video, It helps a lot. I have a question about as photographer, do you use this printer to print big size for sale or gallery show?
I am a tiny not successful photographer, so I don’t know if it worth to spend this much money to buy this. Just wondering it really gonna help with photography career ? Thanks a lot 😅
Hey! I appreciate it, thanks for watching! I used to sell my images. But I’ve moved all of my prints/ sales to my online shop now. I don’t think you need a printer to help your career. I think you need the printer for self appreciation of your work. Printing your own work is one of the best feelings ever!
@@NickHoeller Which lab does the printing for your online shop?
Hello.. Review about canon pro 200 plzz.. Tq.
Great video man!!👍
Thanks a ton, Frank!
I really appreciate you getting back to all the comment questions so I’ll throw in one more for you. Do you know if there’s a custom paper size option where you can print panoramas? I’ve seen some reviews talking about the pro-10 and pro-10s being able to but I can’t find any locally.
Although I’ve never printed panoramas, I believe there is an option to enter a custom paper size in the printer dialog box. I apologize for not helping more!
I know it's a year old but enjoyed this video anyway because I'm borrowing one from a friend who's not using it anymore.
Hi Nick thanks for this video but can you make also a video how you print ... how to use the borders or now borders ect ect... would be great if you can make it
Hi! I have a video on how to print here: ruclips.net/video/e9bGdZS-2ew/видео.html - I’ll be making a new video here shortly on how to print and matte! I’ll keep how to print with borders in mind!
Nick Hoeller
Thanks for replying ok I will keep an eye on your RUclips channel and follow you also so .... thanks also for the video about the smugmug website know bussy with it to set it up 👊🏻
Mine lasted for a little over a year and won't power up. I tried all the stupid things Canon said to try...like hold the on/off button for 20 seconds and you'll be fine. I even replaced the power supply (basically a plug in box) with a known good one. After the printer died, crappy tech support, crazy high shipping fees and the "IF we can fix the problem" is moving me away from Canon for good. I'm not sure I can even trust their cameras any more due to the amount of electronics crammed inside of them. However the print quality was great....while it lasted.
Not gonna this printer is overrated rubbish in my experience. Kept splodging black ink or all the prints, which eventually fixed itself over time. The colours are dull and not all that. It’s now claiming there’s low ink when just just spent a bunch of money replacing the ink cartridges. Piece of tat if you ask me, especially for £360 I paid.
Up to 30 8x10 photos for a set of ink cartridges is too expensive at $110 per set
$3 a photo...how is that bad
How is this printer on matte paper?
Fantastic! I used to print matte all the time.
Is it borderless?
How can you show good print in dim light on your video.
This isn’t a video on the print quality. It’s a review of the printer. I have two other videos that go over the print quality and it’s a brighter environment.
Can it also print fineart paper?
It sure can! Freedom Paper makes high quality fine art paper!
Why do i see them selling on ebay for $600 if you say you can get them for $99?
@3:11 is that a shot of cleveland?
That’s actually downtown Columbus!
@@NickHoellerjesus I have no idea how I mixed those 2 up lol
You found this printer for $99? I just paid $550 for it lol
“”””$99””””*
With the purchase of $1700 in camera gear
@@EricLS where lol
I just bought one in a charity shop UK for £45 :D
Can you also print documents ?
Yes! I always print text documents with this printer.
Thanks
Some examples of printed photos would’ve been good. Ive basically just been talked at for 5 minutes about why it’s good. I could’ve read several reviews on Canon’s site instead.
He did
I bought this printer ruclips.net/user/postUgkxciSwynMJ7PnUvvx11rewiu-yFBkZTl53 to replace an aging HP printer. It is just used for casual home printing so I don't need anything more. Installation went easily though the HP Smart Printing doesn't work well with our laptops - having to select the actual device. Will have to see how the HP Instant Ink program works out. Plus haven't been able to set up printing from smartphone yet - either direct or WiFi
I paid $47 after tax three years ago, and I got two packs of 13x19 canon photo paper Lust, 100 papers for free. And I didn’t buy a new camera.. :-)
Does vinyl or sticker paper print well on this? I’ve heard of people having issues with vinyl.
I’ve never printed vinyl, but I have printed stickers before. They didn’t come out too bad. Maybe a little faded, but nothing drastic. There are settings to change that though.
Hey everyone, if you have questions regarding printers, canon have a live chat available. www.canon.co.uk/canonlive/live-chat/ hope this is helpful
You said you got it for $350 but it’s $899 right now lol
I think it got replaced by Pro 200 or 300 so it's now obsolete
Still recommend this in 2024? Have an opportunity to grab it for under $200...
canon had this printer for as low as $50 after rebate.
Man said the ink last long then said he gets 20-30 pages 😭
Hey Luke! What’re you expecting from a photo printer? 20-30 full bleed 8x10 photos is A LOT considering this is a photo printer and not your usual inkjet printer.
@@NickHoeller I suppose. How much do you think it would print 4x6? I’ll probably not print that many 8x10’s
@@imsavor 50 or more 4x6 size.
looks like door salesman, where is the damn printer?
100 bucks? Going price is 740.00
I have one I’m selling it if anyone is interested
How much?
Wtf....this stupid thing is almost $600 now
fHell all you did was show pictures. Nothing about the printer!
I don't think you have the printer
I sure do. I’m not sure why I would make a video about it if I didn’t have it.