See how great the headrush folks are fixing the looper! A company that actually listens and acts!! And great video that you instantly put out! Headrush and the pedal guy are both top notch!!!
Hey man! Great video! I just left a comment on a year old video asking this same question...but especially afte the update....if we are to use the MX5 as an usb audio interface, would there be any bad latency or any latency that would make me wanna use a separate Audio interface like my Evo4??? Really lost and torn between this and the HX Stomp 😅😅😅 need some help.
Hi master.. Please help me to find my way. Which one you prefer for best sound quality, this MX5 or POD GO? (Feel, sound quality of amps, and more punchy or real) I am metal guitarist.
Hi! Your videos convinced me of buying a MX5, awesome little box. However, i wanted to ask you, can you switch between rigs without leaving the looper screen after the newest upgrade? I can't make it happen. I've seen you do it pressing two buttons at once, but that was with the older firmware..
Your videos are just excellent! Dude.. could you tell me how I can restore the factory settings on the MX5? I got to see a video or another about how to do it on the pedal board and gig board. But on the MX5 I'm not finding how to do it!
I just upgraded and then had to roll back. Something has changed with the processor utilisation/optimisation. I was working on a preset for headphone practice last night. It was sounding great. After the update, i wanted to change the overdrive block to try one of the new ones. However, everything was greyed out. If it deleted the block it still would not let me add another, all greyed out. It was like i was out of processing juice. So I reverted to previous firmware and now it's fine again. I can change the overdrive. Maybe they tweaked it for performance reasons, or maybe it's a bug. I'll let them know, but be warned.
@@ThePedalGuy It might be my experimentation with IRs. I loaded a few free ones I got and i'm also doing something weird with loading two IR blocks. So that might be why i'm pushing it harder than others might. But still the issue is only in v2.4 so there must be something to it. I'm a software engineer and I seem to always spot the bugs. Anyway, here is a video I put up to help the support guys, when i figure out how to reach them. ruclips.net/video/WKCWfuFd4Fc/видео.html
i just received my refurbished headrush in the mail and it is stuck on the loading screen, do you know how i could possibly get off of the loading screen because none of the buttons are working.
Hi! I'm using a Headrush Pedalboard but I think the interface on the MX5 is way more clear and accessible with all controls on the screen. On the Pedalboard you see onle three parameters at a time. Is there a way to switch the view to MX5 mode or something?
Hey, I just get a headrush pedalboard but when I try to download the latest firmware 2.4 from the web page it says "403 - forbidden" is it possible to get the firmware from any other place or can someone sent me that file? Thank you in advance!
Thanks. I wrote those. But there really wasn't anything to it. I used the default setting in most cases or the presets that were already provided. Except for the reverb, which I would pull the mix and reflection time back. Nothing to it really.
@@Charvel4ever I’ve actually done that with the main Headrush pedalboard on this channel. It’s exactly the same. Have a look on that playlist and check it out
@@ThePedalGuy - ugh, thanks for the info. Not sure I can justify at the $500 price point as there are other contenders out there for not much more. It was REALLY appealing for $400 new though. Maybe I’ll just wait for some used ones to pop up at around $250ish
@@THE_Secular_Conservative - I found a used one for $275 on Craigslist since my last comment. I’m digging it for that price, I wouldn’t have bought it at $500 new though.
See how great the headrush folks are fixing the looper! A company that actually listens and acts!! And great video that you instantly put out! Headrush and the pedal guy are both top notch!!!
Thanks!
Tuner and looper upgrades! I can now recommend the mx5 without reservation.
Cool
Nice! I love that groove you were jamming over.
Thanks.
Hey man! Great video! I just left a comment on a year old video asking this same question...but especially afte the update....if we are to use the MX5 as an usb audio interface, would there be any bad latency or any latency that would make me wanna use a separate Audio interface like my Evo4???
Really lost and torn between this and the HX Stomp 😅😅😅 need some help.
I never had any outrageous latency issues myself, but it does depend from system to system.
@@ThePedalGuy thank you sir!!
Good explanation and demo of the Firmware upgrade
Thanks
Hi master.. Please help me to find my way. Which one you prefer for best sound quality, this MX5 or POD GO? (Feel, sound quality of amps, and more punchy or real) I am metal guitarist.
Hi. If you're choosing between these two specific models, the MX5 gets my vote
Hi! Your videos convinced me of buying a MX5, awesome little box. However, i wanted to ask you, can you switch between rigs without leaving the looper screen after the newest upgrade? I can't make it happen. I've seen you do it pressing two buttons at once, but that was with the older firmware..
Your videos are just excellent! Dude.. could you tell me how I can restore the factory settings on the MX5? I got to see a video or another about how to do it on the pedal board and gig board. But on the MX5 I'm not finding how to do it!
Nice work Scott great video!🎸
Thanks!
I just upgraded and then had to roll back. Something has changed with the processor utilisation/optimisation. I was working on a preset for headphone practice last night. It was sounding great. After the update, i wanted to change the overdrive block to try one of the new ones. However, everything was greyed out. If it deleted the block it still would not let me add another, all greyed out. It was like i was out of processing juice. So I reverted to previous firmware and now it's fine again. I can change the overdrive. Maybe they tweaked it for performance reasons, or maybe it's a bug. I'll let them know, but be warned.
Strange indeed. I literally have never maxed out the processors on this board. Please let the HR team know.
@@ThePedalGuy It might be my experimentation with IRs. I loaded a few free ones I got and i'm also doing something weird with loading two IR blocks. So that might be why i'm pushing it harder than others might. But still the issue is only in v2.4 so there must be something to it. I'm a software engineer and I seem to always spot the bugs. Anyway, here is a video I put up to help the support guys, when i figure out how to reach them. ruclips.net/video/WKCWfuFd4Fc/видео.html
i just received my refurbished headrush in the mail and it is stuck on the loading screen, do you know how i could possibly get off of the loading screen because none of the buttons are working.
Not sure. I would contact who you bought it from.
Hi! I'm using a Headrush Pedalboard but I think the interface on the MX5 is way more clear and accessible with all controls on the screen. On the Pedalboard you see onle three parameters at a time. Is there a way to switch the view to MX5 mode or something?
no
No but that is an interesting question
Hey Scott, just saw this. Where can I get the drum beats?
I bought the loops from a site awhile back
Hey, I just get a headrush pedalboard but when I try to download the latest firmware 2.4 from the web page it says "403 - forbidden" is it possible to get the firmware from any other place or can someone sent me that file? Thank you in advance!
Strange. You might want to reach out to the Headrush FB group
@@ThePedalGuy thank you!
Hi, thank you for the demo. One quick question : Did you write the new rigs or did they come with the update ?
Thanks. I wrote those. But there really wasn't anything to it. I used the default setting in most cases or the presets that were already provided. Except for the reverb, which I would pull the mix and reflection time back. Nothing to it really.
Does it have a good harmony guitar program?
Hi. It has two different whammy effects, a smart harmony effect, and a drop tune. They got ya covered
@@ThePedalGuy Could you demo that 👍
@@Charvel4ever I’ve actually done that with the main Headrush pedalboard on this channel. It’s exactly the same. Have a look on that playlist and check it out
I don't see the new amps. I am not seeing the EPB amps
They should be towards the top of the amp list
@@ThePedalGuy Hi Scott, silly me, I had to download the 2.4 updater first. Now it works! Thank you. You're the greatest.
@@AngelMartinez-qs3cf LOL. Glad to hear it
Great..... 👌👌👌🍻
Thanks
I could have swore the MX5 was $399 everywhere just a few weeks ago. I just went to purchase one now, and all I’m seeing is $499?!
It was originally $399 but the price increased on Jan 1 to $499.
They are in tight supply at the moment.
@@ThePedalGuy - ugh, thanks for the info. Not sure I can justify at the $500 price point as there are other contenders out there for not much more. It was REALLY appealing for $400 new though. Maybe I’ll just wait for some used ones to pop up at around $250ish
@@NickfromHighTide welcome to inflation my friend 😉
@@NickfromHighTide Its worth 500.
@@THE_Secular_Conservative - I found a used one for $275 on Craigslist since my last comment. I’m digging it for that price, I wouldn’t have bought it at $500 new though.
Is the trio p comeing out with new peals new an more on it
Not sure I understand your question