Sundown Audio 10" Xv2 Shift Fix + Convert to 12" Pair Ti Frame & .25 DVC Coils by The Lord of Bass
HTML-код
- Опубликовано: 15 окт 2024
- "Land of the Free, Home of the "Slave", by Jahlael Bey: amzn.to/3zz9F8l
"How the Police Get Away with Murder", by Jahlael Bey: amzn.to/3JhY9Dc
Music by Cantoma: "The Call", Banzai Remix
• The Call (Banzai Repub...
Subwoofer is only $400 local or $500 shipped with 3yr warranty. Add $50 for removable top assembly version. MSRP: $1999.95
Order direct from Robot Underground - text your name and shipping address to 6023126504
The 180 mm carbon fiber dust caps are only $15 each shipped.
Get those gap dimensions: amzn.to/45Lda9X
Bank online with Chime! Sign up today and WE BOTH get $100: chime.com/r/pa...
WLLDSE Subs:
(Needs mass) 15" 650w w/ 3" vc: amzn.to/3JMft3i
(Needs mass) 12" 650w w/ 3" vc: amzn.to/3Dg3bwJ
12" w/ 31Hz Fs, 3" coil & 1500w power: amzn.to/445MNKe
(Needs mass) 15" version, SPL as is. Add mass for SQ: amzn.to/3Q5Gdjk
12v relay voltage monitor / controller: amzn.to/3Xx2qbZ
Sine wave generator #1: amzn.to/3OjvHnl
Sine wave gen #2: amzn.to/3Q0Ln00
Solder re-work station: amzn.to/43xIGWM
Only Fans: amzn.to/44tEPeP
USB's: amzn.to/3XVOAji
Angle air grinder: amzn.to/3Q5WHrJ
I use 36grit 2" Roll-Loc types
Love these: amzn.to/3rz17xc
BT5 mods: amzn.to/46YchLZ
For Devil's Jizz: amzn.to/3DmUNLT
My fave hardcore dykes: amzn.to/46WzuhO
Handheld battery tester: amzn.to/3K7bZbZ
Recoil B-Stock & Clearance on eBay: OriginalDutchBoy
shorturl.at/vFH34
Don't forget to end violence by unloading that prostate BEFORE you leave the casa.
#HandysNotHate
CumGobbler 9000: amzn.to/3V695bT
Dayton Audio DATSv3 amzn.to/3ZxE1CQ
Blank, GONZO Brazilian 8k is just $450 shipped.
5k is only $350 each shipped or 2x for $650 shipped.
3k 1 ohm is $250 shipped
3k 2 ohm is $250 shipped
600.4 is only $275 shipped.
Recoil DSP w/ 50wpc 4ch class D amp & Bluetooth $150 shipped.
DIY Anything libgen.rs/
Harvard pll.harvard.edu/catalog/free
Google: grow.google/gr...
Loudspeaker Cookbook bityl.co/FE18
LMS goodness - web.archive.or...
4ga copper 17' kit is only $65 from Robot. $75 on Amazon: amzn.to/3wNKJcj
Recoil RAM65 Rose Gold series 6.5" components: bityl.co/J4Gr
just text me direct for the best pricing
Have you interacted with our church T.C.O.Z. or the outreach program, Robot Underground?
We'd appreciate 5 stars but if you don't agree, PLEASE let us know so that we can earn that rating.
g.page/r/CTgbF...
Learn more about Robot: • About Us - Robot Under...
Carbon and glass fiber 180mm caps are only $15 each shipped to the lower 48 states from Robot
12" Johnny 5 cones with no mount holes in blue stitch, black stitch or NO stitch are just $25 each shipped. Compare to LOB on the CN1235
PPI / Precision Power, Phoenix Gold, Orion power and speaker plugs, text me
BlackJack Audio glass fiber coaxials.
3yr warranty against defects. Rubber surround and swivel metal tweeter. 100uf Bass Blockers also included. Grills are also available for FREE on most sizes.
3yr warranty against defects and we can drop ship direct to your client with your return address to keep The Underground... .Underground.
All prices include CONUS shipping.
3.5" pair $85
4" pair $90
4x6" pair $95
5x7" pair $165
5.25" pair $165
6.5" pair $165 Compare to Focal Flax: amzn.to/30JKcdJ
6x9" dual tweeters $185 per pair.
9x 18ga OFC 20' speaker wire with remote $15 shipped by Robot: bityl.co/J4H9
5x 18ga OFC 20' speaker wire w/ remote $10 shipped by Robot: bityl.co/J4HS
Share the Starlink Studios video - • Starlink Studios "Star...
Don't forget to help end violence with #HandysNotHate
The power of peace is in your fist, (well your weener anyway)
I never want to compromise my freedom of speech for payouts from Google....That means I will not monetize these videos. So, if you want to support us, there are other ways to do it.... And that way you get to hear me say curse words.
Another way to support the channel, apply for a Discover Card. CREDIT IS YOUR FRIEND! Use it to buy assets and then SELL THOSE ASSETS at a profit.
refer.discover...
I don't run a business, NOR AM I PROFESSIONAL.
TCOZ is our church, Robot Underground is the outreach program for that church.
Links to stuff:
OG page: www.RobotUnderground.com
RobotUnderground2
Google page: shorturl.at/lKORV
www.Patreon.com/RobotUnderground
/ robotunderground
Blogspot: robotundergroun...
Cash App signup: cash.app/app/Z...
Make sure you sign up and send from your phone only. Otherwise you'll have problems.
I bought a 15 custom built and a 5k amp from him 2 years ago for my work truck and wow still going strong and i run the hell out of that 15 he does wonders to a sub great work
He uses nothing but the best chinese parts
@@ah4800 and going on the 3rd year and still hitting hard af
Awesome work Pat! I can’t wait to see mine. You got some serious skills my man.
I did this to my Skar evl 15's all 4 of them on a TI frame from Lord of bass with soft parts man LOWs now. But a awesome mix here on them sub nice work sir
Cool, thanks
Great subwoofer build. 😊
The spiders sounded like a work table when you were showing the mini wrenches. I liked both center caps.
Pat keep up the good hard work
This 3:06 was made for sunclown fans they can take the basket off and sit on it😂😂😂😂😂😂😂😂😂😂😂😂😂😂 geeeeesuhhhhhs
I guess you could put casters in the mounting holes
Cold solder
Get “bob smith CA” your life will change. Been using the brand since I was 11 years old. We have been using both smith bsi glue products for over 40 years at my hobby shop
back in 2010 I got a JL 6W3v3 for $120 from crutchfield to replace a dry rot factory sub. The market for small subs was very limited back then so IIRC my only options were Kicker or JL. Today the same JL subwoofer at crutchfield now cost $280. IMO it was totally worth the $120 since its been in constant use for 13yrs and counting but no way in hell would I buy one at todays price of $280.
Amazing DIY video
I wish I could work at your shop ❤
Love your videos please keep up the good work
Do you build any 8” subs anymore?
Yes I'm developing a GONZO 8 that I can be proud of
@@RobotUnderground awesome I have a 12 in my truck now but it takes up a seat space and someone crushed it’s dust cap I can fit 2 8s behind the seat with enough space to put both seats up I’ll wait until their ready
@@Justthemow Text me direct. I'd rather see you with two bad ass 10's. 6023126504
how exactly did you get the top plate of that motor? i can see its glued but which way would be the easiest without accidentally shifting magnets or ruining parts?
Just text me direct with your name and shipping address. I'll add you to the phone and then we can review your options. 6023126504
@@RobotUnderground nah I live in Sweden, no way to get in contact by phone. I'm just wondering which way would be easiest to remove the top plate since im currently in need of regluing the shorting ring
Just email me direct, robotunderground@yahoo.com Note: You don't need the shorting ring.
I wonder if you can do that with my wolfram 10s. Also, why don't you dont like 10s ?
Tens are fine but the problem is people typically expect more out of them it just depends on how powerful the magnet is and how much excursion you can get out of them. Typically to compensate people will often put them in a large box but at that point you might as well get 12s
@RobotUnderground yeah my wolframs get down they surprised me. I always had 10s until i got my 18. But im gonna go back to my dayton audio 10s i love those.
Whats the most indestructible voice coil? Or does one exist?
No such thing
Is this a 3” coil woofer ? And say your balls start to itch could this be made into a 4” woofer ? I’m just trying to learn more about their parts and compatibility I would appreciate some knowledge
Yes, 3". No, cannot be made into a 4" without mill work to the steel parts. Better to start from scratch.
My question is with these "mega surrounds" and large dustcaps doesn't this reduce the effective piston displacement, in this case making a 10" more like a 8"?
No not true
The excursion allowed by the larger surround makes up for it in displacement / excursion
@@RobotUnderground Thanks for clarifying that.👍
That orange wrench u gave me is handy!
If you're tough like me you can fit it in your pee hole.
#HandysNotHate
@@RobotUnderground I prefer the butt hole, but I'll try🤷♂️
I like to pick up subs from the pawn shop and disassemble them and then rebuild them it’s really cheap as hell to make your own subs and to follow your directions.
Get them for as cheap as possible.
@@RobotUnderground hell yes and love the channel my buddy and I make custom speaker boxes to and sound proper would love for you to look at the boxes and see what you think
@@txpate2009 Post to your IG or YT channels. Send me the links.
Will this new sub have a better fs than the old sub?
Well the FS is right around 32 hz
Tech question, on the Jerry ain loud channel he just bought 6 new DS18 xx15 subs and he was all excited saying the reason he chose them was they had 42mm of one way x max!!?? With a typical 3" coiled triple stack with what looked like a 20mm +/- top plate I do not see how 42mm 1 way is even remotely possible... My quick math using the 1 way x max formula (which if I'm correct is ww minus top plate/gap thickness divided by 2) figures the coil would have to be roughly 4" tall...! Is my math correct? I personally don't know of any brand using a 3"x4" coil especially with a run of the mill 300oz ferrite triple 1" stack motor. I'm guessing that's 42mm a 2 way measurement or just 100% bullshit. The motor I built has a 3"/76.2mm tall coil and a not very thick 5/8/15.8mm top plate and that still only yields 30.2mm of one way x max of my formula is right.... my 400oz motors have a 2.5"/ 63.5mm tall coil with a 21mm top plate and that yields 21.25mm of 1 way x max... Now that seems oddly exact to half of his supposedly one way number....? Hmmm could DS18 be lying? Huh If so someone bought a product exclusively for a reason that's not real thing.... So his "upgrade" was a samegrade!
Well, many companies tend to skew the Xmax numbers to work in their favor. That's why I prefer to just let people know the wind height of the coil.
@@RobotUndergroundthat Jerry ain loud guys gonna be disappointed he bought 6 new subs to replace his G2 Genesis subs to get more Xmax when he probably has the exact same. Probably the same 300oz motor. I did burst his bubble in the comments earlier this week but no reply lol
@@95Sn95 Not sure why he's wasting his time with 300oz motors. I really need to get that bank loan so I can import some real subs for you guys. Fully built and ready to go.
What cone is that you used?
GONZO
someone loves sundown i see lol
Well I love taking poops too
How can I buy some woofers from this guy. Want some custom 15s w no brand affiliation. Would be dope asf
Just text me direct when you're ready let me know your name and your shipping address 602-3126-504
Sunnex akes a bad ass mini 1/4 dirve kit its a nice set finer tooth ratchet im sure youd love it
LISTEN TO " HAUNTED BUMPS" BY ICP
Basshead attack by icp is also awsome
but u on here reconing they subs u do a video using they subs for then
They exist, so what. They make good products they just charge too much.
I love the part of South Park when the emo kids say something like we don't conform to society if you wanna hang out with up you gotta act and dress like us lol
Lol. Yes this is true
Isn’t robot underground a brand? Screw the name, I buy the subs for their aesthetics, performance, reliability and recone availability if ever needed. The Ti basket is a slut 😂. Some actually like the product and not so much the brand. I for sure ain’t gonna build my own NSV6 so I go to sundown.
Not that you care, but I'm out bro. Can't get down with all the $#!+ talkin'.
Bye Felicia.
One of my super powers is not caring what people think and just calling out mofo's on their shit. If you don't want to hear it, go visit DIY Audio Guy or EXO. They're kid friendly.
Ill never EVER spend sundown money,someone elses sure but not my money. Way overpriced, over hyped for bearded chodes who want to think that all the woman want .
Speaking of which I got to pick up more rubber gloves to wax my choad in the shower. You really get a good grip with those rubber gloves!
@@RobotUnderground lmao!! Yeah ya do!!
What a thief
I will never own sundown it’s overpriced junk 😂😂
lol. Wait until you get a dead one. Hit me up for parts.
@@RobotUnderground I run FI MTs lol
Put that Ti frame on them.
@@RobotUnderground I’m thinking about the neo 4.11s on my next subs
If you heard it yet your welcome🦾