Great video! A question about your resin use - Does that resin smell or have a toxic odour? You appeared to be rather comfortable using it indoors, and I'd love to know if it's viable to be used in an office without stinking out the house!
Thanks for the feedback. I have made changes on my website to make it easier to find the GCode and here is the code for each section of the Creation Workshop profile setup on this comment. You can just copy and paste each section between the ******* sections into Creation Workshop for your new resin profiles Start ;********** Header Start ******** ;Here you can set any G or M-Code which should be executed BEFORE the build process G21 ;Set units to be mm G91 ;Relative Positioning M17 ;Enable motors M106 S255 ;********** Header End ********** Pre-Slice ;********** Pre-Slice %d$CURSLICE ******** ; Printer G-code sequence before each slice G4 P0 ; Make sure any previous relative moves are complete ; %d$SettleTime Layer ;********** Layer %d$CURSLICE ******** ; Printer G-code sequence to print a slice ; %d$CURSLICE @cmdOpenShutter ; UV on ;{$CURSLICE
Hey man, great video!! It’s tricky to navigate the first few steps of getting this beast to work. Very well done. Could you figure out to wirelessly print to the D7 Box (or TPI) ? It has an Ethernet port and viewing its IP in a web browser shows some basic functions. Thanks again brother!
I am glad you enjoyed the video. I do not have a D7 Box to work with so I cannot help you there. However I have recently just setup a Raspberry Pi to work with my D7 wirelessly using NanoDLP software and I do plan to make a tutorial video for that process soon
Yes, it would be best to keep the cover on while printing. As long as there isn't a lot of light (particularly any light sources that would have a lot of UV light such as sunlight through windows) it is okay to have the cover off for short periods of time without having to worry about the resin in the vat curing
The model I chose is useful for testing a DLP machine as well as an SLA machine. The model has many intricate details that can be a challenge for either style of printer to produce. The model I chose has a wide variety of "tests" to see how the printer performs
Hello man, congratulations for the video ! I have one as same as yours, but after a couple months, the box stopped recognize layers... It can import the .cws file but on "layers" stay at 0/0 ... Can you help me, please?
@@theoddartisan2923 hey thanks for asking but i just bought the lcd for the printer. before i was having trouble with the displays Hdmi from computer to printer it kept printing mini size objects. than i bought me the raspberry pi to connected but was having trouble connecting it. But worries I the printer is working fine now and I'm happy thanks!
Here I am, three years after and I cannot find the scropt to put on the GCODE to make it work :(
Any help on that?
NEVERMIND! I FOUND IT ON ANOTHER COMMENT!
awesome video, its hard to find good tutorials for D7, please do more!
Great Video! Good luck with the channel. Looking forward to more D7 videos!
Awesome tutorial!
Great video! A question about your resin use - Does that resin smell or have a toxic odour? You appeared to be rather comfortable using it indoors, and I'd love to know if it's viable to be used in an office without stinking out the house!
Great video but skip the music! It is distracting and doesn't add to the video.
Hello! i have a D7PLUS, how do you reset to factory settings? my machine get stucked and dont read the files to print. Thanks!
Sorry, I don't have the D7 Plus just the regular version. I do now know what you need to do
Extremely helpful video.
Great video. only problem i have is the g-code to turn the lamp on. You mentioned it but i cant find the fix.
Thanks for the feedback. I have made changes on my website to make it easier to find the GCode and here is the code for each section of the Creation Workshop profile setup on this comment. You can just copy and paste each section between the ******* sections into Creation Workshop for your new resin profiles
Start
;********** Header Start ********
;Here you can set any G or M-Code which should be executed BEFORE the build process
G21 ;Set units to be mm
G91 ;Relative Positioning
M17 ;Enable motors
M106 S255
;********** Header End **********
Pre-Slice
;********** Pre-Slice %d$CURSLICE ********
; Printer G-code sequence before each slice
G4 P0 ; Make sure any previous relative moves are complete
; %d$SettleTime
Layer
;********** Layer %d$CURSLICE ********
; Printer G-code sequence to print a slice
; %d$CURSLICE
@cmdOpenShutter ; UV on
;{$CURSLICE
is your site down now?
What resin are you using? I saw a seal stamp photoresin bottle that looks like that and tought it might be used with these printers
In this video I was using Photocentric's Red Hard UV DLP Resin, photocentricgroup.us/product/uv-dlp-hard/
Hey man, great video!! It’s tricky to navigate the first few steps of getting this beast to work. Very well done. Could you figure out to wirelessly print to the D7 Box (or TPI) ? It has an Ethernet port and viewing its IP in a web browser shows some basic functions. Thanks again brother!
I am glad you enjoyed the video. I do not have a D7 Box to work with so I cannot help you there. However I have recently just setup a Raspberry Pi to work with my D7 wirelessly using NanoDLP software and I do plan to make a tutorial video for that process soon
Hello, for your print what were your setting for the exposure time of the resin ? thanks.
wanhaosupport.com is not work anymore
It looks like you can now find what you need at www.wanhao3dprinter.com/Down/ShowArticle.asp?ArticleID=83
Hi van you put a link or something to show what to écrite for the LCD screen to comme on ehile printing please
What we must to before start print? Bring the base to the surface?
If you follow the steps in the video the base will lower to the surface by itself after you click to start the print
I have yet to unbox my printer but should you put the cover on to print or did you have it off for demo purposes?
Yes, it would be best to keep the cover on while printing. As long as there isn't a lot of light (particularly any light sources that would have a lot of UV light such as sunlight through windows) it is okay to have the cover off for short periods of time without having to worry about the resin in the vat curing
hello do you want free licence for D7 workshop for make movie?
Hello! I am interested in your offer. You can send more information to my email at nick@theoddartisan.com
Why you chose sla file model for your dlp machine ?
The model I chose is useful for testing a DLP machine as well as an SLA machine. The model has many intricate details that can be a challenge for either style of printer to produce. The model I chose has a wide variety of "tests" to see how the printer performs
G codes doesn't work
Hello man, congratulations for the video !
I have one as same as yours, but after a couple months, the box stopped recognize layers...
It can import the .cws file but on "layers" stay at 0/0 ... Can you help me, please?
Is your printer the exact same model or do you have the D7 Plus which has a screen on the front of the printer?
I have resolved it. The file name must have no space character. Thanks !
Awesome! I am glad you figured it out. Thanks for leaving a comment with the solution so that other people can learn too!
IM USING THE RED VERSION OF CREATION WORKSHOP , DONT EVER GET TRICK TO SPEN 30 DOLLORS FOR IT BECAUSE I DID NOT TOO GOOD OF A PROGRAM
MINE STILL DOESNT WORK I THINK IM JUST GOING TO HAVE TO BUY ME THE LCD KIT
Why does your printer not seem to work? What part are you getting stuck on?
@@theoddartisan2923 hey thanks for asking but i just bought the lcd for the printer. before i was having trouble with the displays Hdmi from computer to printer it kept printing mini size objects. than i bought me the raspberry pi to connected but was having trouble connecting it. But worries I the printer is working fine now and I'm happy thanks!
The music is too loud but otherwise great tutorial. thanks.