You guys need to get a Huben GK1 pistol (25cal) with a red dot and do a hunt inside the barn! This gun is bad ass and a blast to shoot… it’s basically a rifle in a pistol form, very powerful and accurate! You won’t regret getting one!
Newbie here. I take it, you fill a tank up from a compressor of some sort? Then take a hose from the tank and fill the air tank on the rifle? Or can you go from the compressor straight to the rifle? And what about those hand pumps I have seen on YT being used straight the rifle. That looks like a real job to perform? Thanks
Not sure what I`m doing wrong,after bleeding the hose I cannot disconnect the foster from gun as pressure is coming back from gun. Have to remove bottle to relieve pressure and then disconnect.
Hi 68.Whiskey Great fan of yours from the UK. Probably a stupid question but whens the best time to refill a 250 BAR bottle on an Impact M3 .25cal with 1st stage reg set to @185 BAR and the 2nd reg @135 BAR. Would you refill when your bottle manometer drops to 135, 185 or 205 BAR? You will be my hero if you could let me know Best regards Tony Airgun Mad UK
The bleeder is the small screw on the side of the bottle head. If it is open it drains the air from the head and hose. If it is closed it will hold the pressure in .
Always on is a radar like node guaranteed, always a card fan wishing much more success 🇧🇷
Best supporter!
You guys need to get a Huben GK1 pistol (25cal) with a red dot and do a hunt inside the barn! This gun is bad ass and a blast to shoot… it’s basically a rifle in a pistol form, very powerful and accurate! You won’t regret getting one!
Teach us how to tune for bench rest, comp accuracy. That would be sweet. Thanks
Nice
Newbie here.
I take it, you fill a tank up from a compressor of some sort? Then take a hose from the tank and fill the air tank on the rifle? Or can you go from the compressor straight to the rifle?
And what about those hand pumps I have seen on YT being used straight the rifle. That looks like a real job to perform? Thanks
Not sure what I`m doing wrong,after bleeding the hose I cannot disconnect the foster from gun as pressure is coming back from gun. Have to remove bottle to relieve pressure and then disconnect.
Hi 68.Whiskey
Great fan of yours from the UK.
Probably a stupid question but whens the best time to refill a 250 BAR bottle on an Impact M3 .25cal with 1st stage reg set to @185 BAR and the 2nd reg @135 BAR.
Would you refill when your bottle manometer drops to 135, 185 or 205 BAR?
You will be my hero if you could let me know
Best regards
Tony
Airgun Mad UK
I’m not sure I understand. Why do some 300 bar 4L air tanks cost $200 and why do some cost $500? Are the cheaper ones scuba tanks?
👍👍👏👏 saludos 👍
I’m still getting hung up on close the bleeder step.
The bleeder is the small screw on the side of the bottle head. If it is open it drains the air from the head and hose. If it is closed it will hold the pressure in .
@@68Whiskey thanks buddy. I needed that
Be smart to keep a hand on that line
😂😂😂😂
Next time : how to pull a trigger