Thanks so much for your information. I spent almost $2000.00 just 18 months ago for a poorly made clunker. My husband has NPH relies on a recliner for safety and comfort. It was purchased from a dealer who sang praises about warranty, quality and service.....all of which became a total nightmare. Within 3 months the hand control stopped working and we were told it would be 8 weeks to get another. There is no manual backup to operate the chair resulting in my having to call EMS to get him out of the chair. Within 4 months the padding on the left arm rest wore down so badly that sitting in the chair was painful. It was like leaning on the edge of a piece of lumber.....I mean no padding or even batting on the frame....just lumber with a piece of fabric over it. I warranty people refused to respond, telling me it was the manufacturer’s problem not theirs.I called the dealer who told me he would get it fixed. They sent a repairman to the house who replaced a piece and showed me how the thing was poorly made and designed. He said it would breakdown again and he was right. The owner of the chair dealership was nasty to the point of even insulting me with political comments....was that nuts! He didn’t even have any idea about my personal political leanings and I honestly don’t know why politics was an issue in buying a piece of furniture. All I wanted was to get the chair fixed . It was a horrible nightmare. Avoid Pride products and dealers! I now have a pillow strapped on the left side until I find another chair. Iam going to swallow the loss and have a bonfire in my backyard! Sometime ago I had a La-Z-Boy for over 15 years and it is still being used by a friend. I’m going back to La-Z-Boy . Warranty scams and so called American manufactures are capable of being crooked liars!
Thanks for sharing your knowledge and experience! I have been putting off buying a recliner for years because it is an expensive item of furniture and I never felt like I was confident in finding the right one and having buyer's remorse. I've been to various showrooms and just randomly sat in chairs without properly having a way to evaluate other than general "this feels good". Which almost all of them do. Knowing how to properly check various aspects of a recliner as you mentioned has definitely helped me feel more confident as I continue my shopping journey! PS - Also awesome that you're doing a video on buying the right recliner... but, didn't shoot the video while sitting in the comfort of your recliner! PPS - Thanks again for the video. All the best!
Great presentation. Thank you. Just retired, hoping to buy a recliner for my bedroom - saw a lot of options, your guidance will surely help. Thank you again. Sydney, Australia.
Man, I wish I had seen this video before I went out and bought a $1,100. Lazy Boy recliner. Although, I think I did pretty much the right thing in the store. I did not settle until I found one that fit me comfortably. Thanks for the info!
@@GeorgeWPush I have no complaints about the quality and sturdy build of the recliner: it is MY fault that I did not measure the depth of the seat, as clearly explained in this excellent video. It is MY fault that I did not know about this crucial aspect of fitting the seat to your personal leg length.
Thank you for this video. Well done and informative. I would appreciate examples of high quality manufacturers who sell parts direct to consumers. So far, I haven't found any.
Your advise comes from absolute knowledge and skill and I'm so lucky I found you before I made such a big purchase. You seem to have covered most of it for me which has helped enormously. Thanks so much for taking the time to make this video. Brilliant! :)
Thank you this is very very helpful. My wife will enjoy it. At least I hope she knows I sent it off to her so she can figure out which one she needs. We have all kinds of recliners at our house and I told her the one she sitting in was horrible for her back. She’s already got pins in her back so She needs to do something I thought giving her my old recliner was going to help because it was a little more adjustable, but now she didn’t like that. It was too short for her legs when she kicks back it hit her in the wrong place right on the ankles, so I don’t know will this probably will be much more easy at least if she hast to go get another chair
Great video. I will offer as I am currently in the throws of finding a chair. NOT easy to check all the boxes. Get the right width and the height is off, get a great look and the comfort isn't there etc etc. I think "Comfort" and a look your Wife can tolerate is about as close as you can get.
Very good video. Thank you for sharing. Im 6'9" and 320. All muscle of course. (LOL). Trying to find a recliner online that I can order as going into showrooms has been worse than buying a car. Many sales people do not understand that Big and Tall presents other concerns. Can you recommend a top brand list of companies that have a line of products for guys like me AND hit the requirements on your video? Especially the shipping to parts directly. Did this with my office chair awhile ago and it was a wonderful experience to have a company (LifeForm) warranty out a seat pan with a brand new one for an issue after 6 years and for $20 shipping. This office chair is going on 8 years old. If only they made recliners huh? Thanks again.
Excellent video. Wish I would have seen it without laying out 1500 on an electric chair with a headrest that is adjustable. Useless unless you have the right fit. Thank you again.
What a great helpful video. Thank you! I only wish you would have actually shared some brands that you trust. With your experience, that would be such valuable information.
@Patty Sisk - The brand selection in my area is quite small. So, I don't get a good look at a lot of different brands. However, I do have videos that address furniture construction quality and what to look for. Including the video, 'Who Makes the Best Furniture / Recliners?" on the ReclinerRepairGuy.com website. Spoiler alert: The mass-produced furniture brands -- La-z-boy, Lane, Ashley, Flexsteel, etc. -- no longer produce good quality products throughout their product lines. Check out the video's (referenced above) description on the website to learn more.
Thank you for making this video. I only wish I had seen it before I invested in a power chair where my feet don't quite touch the ground and where there is insufficient padding in the seat cushion (too firm). After watching your video I think I now have some valuable guidelines to follow in selecting my next chair ! Thanks.
could you kindly suggest best non power recliner for person less than 5ft 5 inches and less than 130 lbs. -for very elderly person -pref. leather (for easy cleaning) .Thank you. very gratifying to see awesome and very educative videos.
Actually there is a third issue regarding the electric recliners and that is when there is a power outage you are stuck if you are in the recliner in a foot up reclining position you will have a hell of a time getting out of it.
I just bought my first recliner, I'm 6'4 and most chair's at the store are too small. I ended up buying a lazyboy that is made for 6'3 and up. I've only had it a week but I feel it's just a tad too big. Sometimes I have buyers remorse about the chair. My feet are flat on the ground with shoes on and barefoot the balls of my feet touch the ground. The problem with me is I've spent my whole life with knees up in most sitting situations, so I can't tell if I'm finally sitting right or it's just too big. I wish I knew if i made a mistake or if breaking it in will be better or worse.
After having my sectional sofa for 21 years, I bought new furniture- a sofa & 2 recliners. It was so soft and plush and felt so comfortable at first. But now, I am experiencing back, shoulder and neck pain and I don’t know what to do. This furniture was rather expensive. I wish I’d seen this video before I purchased my new furniture. It does not affect my significant other like it is doing me☹️ Do you have suggestions on inserts or cushions/pillows that would help? Thank you in advance
@Janice McGatlin - If your furniture is less than a year old and is a name brand product, it should still have warranty coverage. Contact the dealer (seller) to report the problem. If the furniture is more than 1 year old, you can still contact the dealer to report the problem. They may service the products they sell. You most likely will have to pay a service call charge to have someone can come out and make an assessment. Once that's done, they can quote you the cost of adding/replacing padding, etc. If they don't do service after the sale, ask them to refer you to someone in your area that can help you.
Oh man, I once bought Bonzy off of amazon, sure they are cheap, so is the quality. Utter rubbish, and thankfully I could return without any hassles, thanks to Amazon
I am 65, and I was having difficulty closing my footrest. I found that if I put my heals at the bottom edge of the footrest, it will close with very little effort. Furthermore, I presume this is because of the proper use of leverage.
Lazy Boy is the only answer! Buy one on sale, get fitted by a sales person and it will last you 30 years with daily comfort. Get one with lumbar adjustment and head rest adjustment
Great video alot of good information. One question, are the ones with lower seat being lifted under the knees better ( like in cars ) or the ones that are flat ( paralel with the floor )
Seines -- The angle of the seat is a personal preference factor that I did not cover in the video. And whether an angled seat is actually lower in the back than a standard seat, is a good question. If it is, it could make getting out of these chairs more difficult for some people. I'd try them both out to see which works better for you.
I have watched many of your videos; thanks, they are very informative! One question I had: our La-Z-Boy (2018) has begun to make a "ping" sound (from a spring) when it rocks, and we can't find a way to stop it. Do you have any thoughts on a remedy for this problem? THX!
@Nancy Duffer - It's not unusual for motion furniture to develop noises as it ages. In fact, as Rocker/Recliners age, it's highly unusual when they don't make any noise. Having said that, the thing to do when you hear a new noise -- particularly a loud one -- is to make sure it's not being caused by a mechanical problem. I.E. - parts that are bent, broken, binding, rubbing, loose, etc. Many Rocker/Recliner models allow a bit of sideways motion by design. An occasional '"ping" type sound may be heard when the springs pull the Rocker Base back into alignment. That's normal and does not necessarily indicate a problem.
Who do you suggest that we use to purchase an electric reclining sofa? We have tried Flex Steel X 2 and Lay Z Boy, all of which have structurally failed within a year. I am a big guy, but 6'5", 250 lbs should not mean that I cannot have a reliable sofa. My serious back issues prevent me from sleeping in a bed and I rely on the electric control to get myself in the "just right" position. Surely there is a company out there that produces a quality, structurally reliable unit. Hope you have a suggestion as we are at our wits end, about to return the LZB for a refund after 3 repair jobs in 6 months.....
@Jon Gordon - Mass-produced furniture, like the brands you mentioned, are not the best quality. They are simply brands that most people can afford. You'll have to spend more to find furniture that has better frame construction and uses better-quality padding. I work on the mass-produced stuff, so I'm afraid I can't refer you to any specific brands. In my area, Norwalk Furniture is one company that produces better-quality furniture. But as I mentioned, it's more expensive as well...
@@reclinerrepairguy4155 Thanks for the reply. At this point price is not really an object. I am not rich per se, but well off enough to buy a quality piece so we can stop this merry-go-round of silliness. Thanks for the info, I'll check with the company you mentioned and see if they can recommend a manufacturer..thanks very much!!
I wear out backs like crazy, because I spend a lot of time in my recliner. Specifically the middle and lower part of the back. I sit in it for about 8 hours a day, for my job. How should I fix this problem? Just learn to repair them and keep fixing them? Or is there a brand that has really strong back and lumbars? Any particular model? Thank you!
@Enermax Stephens - I'm not clear on whether you're referring to padding replacement or frame problems. If it's padding, simply use better quality padding that will last longer. You can have an upholsterer install it. If it's frame failure, see my Closer Look video series on frame construction on the ReclinerRepairGuy.com website.
@Manape - There are no specific recommendations for recliner arm rest height that I'm aware of. Since people have different torso & arm lengths, I think it would be difficult to achieve a position that would be ideal for most users. My guess is that manufacturers most likely arbitrarily establish arm rest height as a specific distance from the top of the seat, when designing and building their chairs.
@@reclinerrepairguy4155 i did some serious dhopping at a couple local establishments yesterday. Wow it was eye opening. I learned real fast what would work for me. Your tips about proper sitting position was spot on.
Would have been helpful if you named the gold name brands. The only one I know for sure is Lazy Boy. I recently bought a couch from Ashley that I got a good deal on and I love the look of and it felt comfortable in the store, but I’ve had to modify it by stuffing pillows under the cushions and what. It because particularly the chaise part sinks down super low and gets very uncomfortable.
@DavidMalcolm - If by "gold" name brands you mean top-quality brands, there are no such brands in the mass-produced furniture market. That includes companies like La-z-boy, Flexsteel, Ashley, Catnapper & others.
Is there a brand you feel is best quality ? I’m short and would prefer 20” or less seat depth and I’m looking for a loveseat that reclines. We bought a La Z Boy Brooks yesterday. But it’s not too late to cancel . Based on your videos, I’m concerned that it may become uncomfortable over time . I really only picked the Brooks cuz we couldn’t afford anything else at that store . And I kept encountering the seat / back gap when I’d recline at other stores with cheaper recliners . La Z Boy didn’t have the gap and the seat depth of Brooks seemed pretty good . But I read that it’s 21” deep . We were in a hurry because they were closing and I need a chair ASAP ! I thought it was in stock there or if not have bought it . We will get it Wednesday if I don’t cancel . My husband loves it . But he doesn’t sit in things long enough to know .
@Roger Whiting - Yes, low-quality padding and poor frame construction are common in the furniture industry today. To learn more about the different levels of quality out there, see the video, 'Who Makes the Best Furniture / Recliners?' on the ReclinerRepairGuy.com website. But a much cheaper option (than buying expensive new furniture) is to hire an upholsterer or repair tech to refresh your seat with a higher density (better-quality) foam. IF the rest of the recliner is still in decent shape, of course.
catnapper series Recliners are stapled together particleboard frames . broke in 3 months by a tiny woman who is not abusive. I hucklebucked some substantial bracing and cross members to repair . Buyers beware . And to find out they were made down near Tupelo MS, where Action Lane and many known good brands are produced is an embarrassment to the US workforce .
can one use a recliner for a computer chair i only seen one person on youtube that did. this is the computer chair and recliner i was thinking to get but as a computer chair : POWERSTONE Gaming Recliner Massage Gaming Chair with Footrest Ergonomic PU Leather Single Sofa with Cup Holder Headrest and Side Pouch, Adjustable Living Room Chair Home Theater Seating
God bless you,. Perhaps I can use this when I’m able to get another one. I’ve been having a terrible time as I’m chronically ill and pretty weak. I am also in the chair far too much for my liking. In addition to being mentally taxing, it is physically excruciating. I’m afraid I just got another crappy feeling chair I will have to deal with for months if not years, to come. 😭
@Let It Roll - Microfiber used to be the standard, as for as low maintenance is concerned. (I don't know how healthy it is, however.) Since I don't work on new furniture these days, I don't know what fabric(s) would meet that standard today. My guess is that most name brand furniture fabrics would not be very healthy because they are often produced overseas with little or no quality control to maximize profit margin. For "healthy" fabrics, you'll most likely have to seek out companies that specialize in such products. Like companies that produce new carpeting that doesn't leach chemical fumes / odors in your home.
Gary F - Yes, I've heard of this being done, though I've never done the procedure myself. You'll need to order a new Drive Rod (left-hand version) -- the square, solid-steel rod that runs thru the middle of your mechanism & attaches to the Handle. You should also order (replace) any worn or damaged parts you may have along the Drive Rod, including Retaining Spacers, clips, etc. A hole will have to be cut thru the Outside Arm Panel on the left-hand side to accommodate the new handle placement. All parts attached to the Drive Rod will have to be removed & then reattached to the new rod. I recommend using an experienced La-z-boy repair tech for this procedure. Your local La-z-boy dealer should be able to help you with this conversion.
Is there a way to limit the forward rocking I have to push with my hands when I get up and my the chair rocks so far forward and down it’s difficult to get up. We just bought our 3rd set of recliners the others were all gliders these were supposed to be gliders also. I should have sent them back but thought I could get accustomed to it. I’ve had them for a week not satisfied. Also I still have the old recliners would it be a huge job to swap out the glider mechanization into the new recliners
@russelledsall2984 - La-z-boy Rocker Recliner bases can be swapped out with Swivel Rocker bases. But the gliders have a different mechanism. Let the seller know that you didn't get the correct chair. Otherwise you'll have to "rig it" so it won't dip forward as much when you exit the chair.
@reclinerrepairguy4155 3:34 This exact chair that you demo in this exact time stamp of the video, what model of La-z-boy chair is this? Is this the pinnacle rocking recliner? Also what color is this chair, and is this a micro-fiber recliner, or is this chair made of chenille? Will definitely stop by La-z-boy with my dad one of these days so I can demo a pinnacle recliner before i get one. Can't wait to get a new recliner! a blue soft chenille la-z-boy pinnacle recliner to replace my cozy precious old blue la-z-boy chair i miss so much!
Thank you for posting. Can you recommend a recliner for someone who is heavyset (~430 lbs.) and 6'3" tall? What was the recliner model at the beginning of your video?
@FromHere2Where - You'll want to look for chairs that are specifically made for larger users. Some of them are rated by the manufacturer as to the max weight they can support. Find one rated to support your weight. Typically know as a "Big Man's" chair, I briefly cover this topic toward the end of this video ---> www.reclinerrepairguy.com/advice_tips.htm#tipover
John Gaspar - I believe the manual La-z-boy recliners have always been designed that way. For those bothered by the sound, there's an easy work around. Simply rock back slightly just before lowering the handle. Or, if your legs are long enough, move 1 leg off the footrest and onto the floor. Push against the floor just before closing the footrest. Both methods take pressure off the parts that engage to hold the recliner in the desired reclining position. Many La-z-boy owners use these methods to avoid the "clunk" sound when closing their recliner. In fact, that's where I learned about it myself, from La-z-boy customers! :)
@True Hope - Sorry, I don't know the style# or name of the chair. The recliners used in my videos are often a few years old or older and are not necessarily still available for sale as new models.
@tenniearmybarbie1959 - See this video to learn more about the 3-Position Footrest Feature (& parts) on older La-z-boys ----> ruclips.net/video/FjCJAzuY9MQ/видео.html
@@reclinerrepairguy4155 okay so i replaced the teeth oon my 1983 lazyboy to lock in the recline levels but how do i replace the other peice? i cant get the 2 wirer thing apart and off that holds the Ratchet & Pawl
@@tenniearmybarbie1959 - There's usually a set screw that holds the 2 ends of the wire together inside a small metal cylinder. Sometimes the wire remains stuck in there after the screw has been removed. I use a pointy scratch awl that will fit in the hole to try to break the wire loose. It can be challenging & take some time.
Until, say, la z boy can offer a recliner with seat foam option that is high resiliency foam that is at least a 2.5lb density with at least a 35 ILD - i can't buy one, as I'll be sitting in the thing all day every day. Comparable back padding to match as well. I may have to shop for commercial grade furniture in order to fit my need; sad. Brother, with your experience with la z boy failures, you could literally redesign their recliner using better, longer lasting components and then sell them online - I'd would buy that recliner from you!
In fact, if you could acquire a la z boy that fits me and if you would replace the seat and back materials...never mind the mechanical parts - I would buy that new and improved chair from you. Doable?
@Vidya's Haute Cuisine - Fit is purely an individual thing, just like the shoe size you wear. When you have to compromise that fit with others -- when purchasing a sofa or loveseat, for example -- the best you can hope for is to find some middle ground where you can easily tolerate the fit not being perfect for both of you. However, if either of you has to struggle when using the furniture -- opening a recliner or whatever -- that's not a good compromise. A better solution may be to get a separate chair (or recliner) for one person, or perhaps 2 recliners, 1 built to match each individual body type.
@@reclinerrepairguy4155 Thank u Sir for replying to my question... I have one more question... can we use a pillow for back support if the seat is wide or will it cause back pain in the long run?
@@vidyashautecuisine720 - You can try that to see if it works for you. But I would recommend using a tall (long) pillow that supports your entire back. And remember, the pillow has to be thick enough so that your leg reach over the front of the seat cushion is correct. However, even if you can achieve that, the recliner may not operate as well (or at all if your weight causes the nose of the seat cushion to obstruct the footrest) because your body weight is more forward on the seat than is normal. So, never buy new furniture hoping you can come up with a quick fix to overcome a bad fit, because It may not work. But if you already own furniture that doesn't fit, you can experiment all you like. ;)
Is there a smaller brand that makes excellent quality recliners? I bought push back RH recliners that are uncomfortable and the backs of both of them are loose. Help!
@No Hate - If you're looking for excellent quality, then stay away from the mass-produced furniture brands, such as La-z-boy, Lane, Flexsteel, Ashley, etc. There are better-quality furniture makers out there, but the cost will be significantly higher than most people are used to paying for furniture.
@@reclinerrepairguy4155 It is irritating that you keep repeating this statement. Why not list some makers of higher quality furniture and let US decide if we can afford it?
@@proteus5 - I don't follow the new furniture market, so I don't have any specific recommendations for you. The last time we purchased new furniture, it was from Norwalk Furniture, 14-years ago. The frame construction & padding was head-and-shoulders above mass-produced brands at that time. However, we did have problems with the cover (fabric). So, for those who might think that paying more will guarantee a worry-free buying experience, think again. That's not always the case. As for the quality of Norwalk Furniture products today... as I said, I don't follow that. So I would only be guessing at the quality level of their products now. Buying tips: If the furniture is better quality, the warranty will be better (than the mass-produced brands). Also, you may find examples of cut-a-ways showing actual frame construction -- whether in-store or on the manufacturer's website. Although it helps to know a bit about furniture frame construction, as a general rule, you're not likely to find any cut-a-ways examples of mass-produced furniture. Because that's typically something they prefer to hide underneath the cover. ;) Also, many furniture companies use low-quality padding. Learn more about padding quality to make more informed buying choices ------> ruclips.net/video/_NwGbCUTG8Y/видео.html
@Rob Thorne - Actually, I used 2 different chairs in that video. I don't know the names. The first was similar to a Big Man's chair in size. The other was smaller. The chairs I use are often several years old. Since marketing terms (including chair names) are refreshed from time to time, I'm not sure that the name of an 8 year-old La-z-boy, as an example, would still be in use with their new models today.
Don't buy one from the coaster brand. Mine finally broke with less than 2 years of on and off use. The wood used is so cheap... this should be illegal.
@KingdomUploader - I have more experience with repairing La-z-boys. That's why I've made so many videos covering that brand. Historically La-z-boys have also been more serviceable/repairable than most of its competitors in the mass-produced furniture market. (But unfortunately that has been changing in recent years.) As far as quality is concerned, I don't recommend purchasing any of the mass-produced brands -- Catnapper, Flexsteel, Ashley, La-z-boy etc. Sub-par quality can be found throughout these brands in important areas such as: frame construction, padding density (quality), etc. However, better-quality furniture is not within most people's budgets. That's where my repair videos come in, to help consumers extend the life of their mass-produced furniture when possible.
@@reclinerrepairguy4155 Thank you so much for the time you took in replying. You're a good man in my book. Now, in your opinion which are the quality brands that don't need frequent repairs and how much are we talking - 3 or 4 thousand or what? IOW, what is the least I'd need to spend in order to get a recliner that I don't have to worry about? I'm 69 now and would love to die in it :) Thanks Oh; I only need a handle/lever manual type - no power or cupholders or any frills. Thanks again friend.
So lots of experience repairing La-Z-boy & among those brands not recommended to buy. Thank you. Have you ever heard of the brand Ultra Comfort? Very pricey imo & don’t want to make a mistake . Thanks
@@reclinerrepairguy4155 Just replacing the seat cushion in my Lazy Boy recliner that's over 15 years old. Anyway, I'm in PA and don't even know where you are.
@Gearge Doughty - La-z-boy parts can be obtained thru the manufacturer or one of their dealers. Tip: They typically deal with warranty part orders. So, if you bought yours used, be sure to tell them up front that you don't want to place a warranty part order, that you're looking to purchase the parts you need. That way they'll provide you with a parts quote up front.
@@reclinerrepairguy4155 They refused to allow me to buy parts, and told me that I *must* contact a local store to order parts. That's a $25 to $35 "access" fee, depending on which store. I am very thankful for people who apparently do machining as their side hustle, and are willing to sell the results of their knowledge!
Most of todays furniture is pure garbage.Valuecity wont stand behind there warranty.You are fucked every way you turn.our furniture literaly peeled off.Suports broke.Cheap wood.Loade with cardboard.Reclining mechanism s broke with little use.Be sure it says real leather and not bonded leather from scraps compressed together.
This is the best video I've seen..He has more knowledge than the salesman at the store..
This is a wonderful video! Put up 5 years ago and all the information is as useful today as when it was posted! So well done!
I knew i found the right channel the second i saw the thumbnail. Not pushy. Straight forward. A real person. Not ai or a salesman. Subbed!
You've provided a valuable service to those of us searching for the perfect recliner.
Many thanks.
@Bohemond - You're welcome!
Thanks so much for your information. I spent almost $2000.00 just 18 months ago for a poorly made clunker. My husband has NPH relies on a recliner for safety and comfort. It was purchased from a dealer who sang praises about warranty, quality and service.....all of which became a total nightmare. Within 3 months the hand control stopped working and we were told it would be 8 weeks to get another. There is no manual backup to operate the chair resulting in my having to call EMS to get him out of the chair. Within 4 months the padding on the left arm rest wore down so badly that sitting in the chair was painful. It was like leaning on the edge of a piece of lumber.....I mean no padding or even batting on the frame....just lumber with a piece of fabric over it. I warranty people refused to respond, telling me it was the manufacturer’s problem not theirs.I called the dealer who told me he would get it fixed. They sent a repairman to the house who replaced a piece and showed me how the thing was poorly made and designed. He said it would breakdown again and he was right. The owner of the chair dealership was nasty to the point of even insulting me with political comments....was that nuts! He didn’t even have any idea about my personal political leanings and I honestly don’t know why politics was an issue in buying a piece of furniture. All I wanted was to get the chair fixed .
It was a horrible nightmare. Avoid Pride products and dealers! I now have a pillow strapped on the left side until I find another chair.
Iam going to swallow the loss and have a bonfire in my backyard! Sometime ago I had a La-Z-Boy for over 15 years and it is still being used by a friend. I’m going back to La-Z-Boy . Warranty scams and so called American manufactures are capable of being crooked liars!
Thanks for sharing your knowledge and experience!
I have been putting off buying a recliner for years because it is an expensive item of furniture and I never felt like I was confident in finding the right one and having buyer's remorse. I've been to various showrooms and just randomly sat in chairs without properly having a way to evaluate other than general "this feels good". Which almost all of them do.
Knowing how to properly check various aspects of a recliner as you mentioned has definitely helped me feel more confident as I continue my shopping journey!
PS - Also awesome that you're doing a video on buying the right recliner... but, didn't shoot the video while sitting in the comfort of your recliner!
PPS - Thanks again for the video. All the best!
@jimc6280 - You're welcome!
Great presentation. Thank you. Just retired, hoping to buy a recliner for my bedroom - saw a lot of options, your guidance will surely help. Thank you again. Sydney, Australia.
@neilhoradagoda9148 - You're welcome!
Man, I wish I had seen this video before I went out and bought a $1,100. Lazy Boy recliner. Although, I think I did pretty much the right thing in the store. I did not settle until I found one that fit me comfortably. Thanks for the info!
@Joe Owens - You're welcome!
what dont you like about the lazy boy??
@@GeorgeWPush I have no complaints about the quality and sturdy build of the recliner: it is MY fault that I did not measure the depth of the seat, as clearly explained in this excellent video. It is MY fault that I did not know about this crucial aspect of fitting the seat to your personal leg length.
Thank you for bring some light to recliners !
Thank you for this video. Well done and informative. I would appreciate examples of high quality manufacturers who sell parts direct to consumers. So far, I haven't found any.
Your advise comes from absolute knowledge and skill and I'm so lucky I found you before I made such a big purchase. You seem to have covered most of it for me which has helped enormously. Thanks so much for taking the time to make this video. Brilliant! :)
@Black Bird - You're welcome!
This was so informative and helpful. Your presentation is clear, concise and comprehensive.Thanks so much for sharing this video!
@Patricia Crowe - You're welcome!
One of the most amazing beneficial videos that I've ever watched. Thanks
Thanks for the informative video. Enjoyed your clear, easy to understand presentation.
@Carol Ragsdale - You're welcome!
My wife: What did you achieve today?
Me: Multiple foot elevations
Best informational video I've ever seen on You Tube. Thank you so much
@Lemonake - You're welcome!
agreed! Wouldn't it be nice if EVERY You Tube video was this great?
Brilliant, concise information. Thank you. Ps... love your voice.
@Linda Graham - You're welcome!
I'm going to be shopping for a recliner and found this very useful. Thanks so much for the great information.
@joyfulmn - You're welcome!
Your time and video was helpful 😊 I’m a big guy so wish me luck today finding my recliner. Thanks
@Billy Edmonds - You're welcome - good luck!
Thanks for the video and advice!
@Robert Hughes - You're welcome!
Thank you so much for such a great and informative video.Things to think about before purchasing a quality chair for sure.
@Connie Lahman - You're welcome!
Thank you this is very very helpful. My wife will enjoy it. At least I hope she knows I sent it off to her so she can figure out which one she needs. We have all kinds of recliners at our house and I told her the one she sitting in was horrible for her back. She’s already got pins in her back so She needs to do something I thought giving her my old recliner was going to help because it was a little more adjustable, but now she didn’t like that. It was too short for her legs when she kicks back it hit her in the wrong place right on the ankles, so I don’t know will this probably will be much more easy at least if she hast to go get another chair
@henryrevers1168 - You're welcome!
Great video. I will offer as I am currently in the throws of finding a chair. NOT easy to check all the boxes. Get the right width and the height is off, get a great look and the comfort isn't there etc etc. I think "Comfort" and a look your Wife can tolerate is about as close as you can get.
Excellent, highly informative video. Thank you.
@John Elegant - You're welcome!
Very good video. Thank you for sharing. Im 6'9" and 320. All muscle of course. (LOL). Trying to find a recliner online that I can order as going into showrooms has been worse than buying a car. Many sales people do not understand that Big and Tall presents other concerns. Can you recommend a top brand list of companies that have a line of products for guys like me AND hit the requirements on your video? Especially the shipping to parts directly. Did this with my office chair awhile ago and it was a wonderful experience to have a company (LifeForm) warranty out a seat pan with a brand new one for an issue after 6 years and for $20 shipping. This office chair is going on 8 years old. If only they made recliners huh? Thanks again.
Excellent video. Wish I would have seen it without laying out 1500 on an electric chair with a headrest that is adjustable. Useless unless you have the right fit. Thank you again.
What a great helpful video. Thank you! I only wish you would have actually shared some brands that you trust. With your experience, that would be such valuable information.
@Patty Sisk - The brand selection in my area is quite small. So, I don't get a good look at a lot of different brands. However, I do have videos that address furniture construction quality and what to look for. Including the video, 'Who Makes the Best Furniture / Recliners?" on the ReclinerRepairGuy.com website.
Spoiler alert: The mass-produced furniture brands -- La-z-boy, Lane, Ashley, Flexsteel, etc. -- no longer produce good quality products throughout their product lines. Check out the video's (referenced above) description on the website to learn more.
I tried going to your website listed but the website isn’t active/working. Did you update your website address?
Very informative!
I learned some really good info here, thank you kindly!
@KindCreature1 - You're welcome!
Thanks. That was awesome and helpful.
@Hazem Emara - You're welcome!
I'm in the market for a recliner so I've been doing my research on RUclips. Your video is one of the best that I've seen. Thank you!
@D Lee - You're welcome!
I agree! This is great work
Very helpful! Thank you!
@jenailove9420 - You're welcome!
You need an affiliate link in your comments. This is great information!
Thank you for making this video. I only wish I had seen it before I invested in a power chair where my feet don't quite touch the ground and where there is insufficient padding in the seat cushion (too firm). After watching your video I think I now have some valuable guidelines to follow in selecting my next chair ! Thanks.
Margaret Reeder - You're welcome!
really very helpful video ,thank you !! 👍
@hassan Ccp - You're welcome!
I am in the market for a recliner. The metal in the frame broke. Can not argue with it lasting me faithfully since 2018.
Great video fun and informative thank you
@Orrin Belcher - You're welcome!
could you kindly suggest best non power recliner for person less than 5ft 5 inches and less than 130 lbs. -for very elderly person -pref. leather (for easy cleaning) .Thank you. very gratifying to see awesome and very educative videos.
@sesha chary - Best quality or best fit?
Thanks 😊 this was informative 👍 👏
@KSA4FUNCOM - You're welcome!
Holy cow, I am very grateful
I installed an ejector seat for easy getting out. I left the window open by accident and never saw my nan again :(
Benny Hill would approve
😂😂😂😂😂
great help !
thank you very informative
@Ferrettable - You're welcome!
Actually there is a third issue regarding the electric recliners and that is when there is a power outage you are stuck if you are in the recliner in a foot up reclining position you will have a hell of a time getting out of it.
@watrgrl2 - Most modern electric recliners have a battery backup for those situations.
Doesn't have to be power outage, I was forced to climb out with broke rib & foot because breaker flipped.
very informative video!
Also on electric operated recliners Puppes love to chew on the cordes.
I just bought my first recliner, I'm 6'4 and most chair's at the store are too small. I ended up buying a lazyboy that is made for 6'3 and up. I've only had it a week but I feel it's just a tad too big. Sometimes I have buyers remorse about the chair. My feet are flat on the ground with shoes on and barefoot the balls of my feet touch the ground. The problem with me is I've spent my whole life with knees up in most sitting situations, so I can't tell if I'm finally sitting right or it's just too big. I wish I knew if i made a mistake or if breaking it in will be better or worse.
Thank you just got a power recliner
All great info to know. Thank you.
@donnamiller83 - You're welcome!
Thanks a lot Mr
@Mays Turk - You're welcome!
I'm in love.
After having my sectional sofa for 21 years, I bought new furniture- a sofa & 2 recliners. It was so soft and plush and felt so comfortable at first. But now, I am experiencing back, shoulder and neck pain and I don’t know what to do. This furniture was rather expensive. I wish I’d seen this video before I purchased my new furniture. It does not affect my significant other like it is doing me☹️ Do you have suggestions on inserts or cushions/pillows that would help? Thank you in advance
@Janice McGatlin - If your furniture is less than a year old and is a name brand product, it should still have warranty coverage. Contact the dealer (seller) to report the problem.
If the furniture is more than 1 year old, you can still contact the dealer to report the problem. They may service the products they sell. You most likely will have to pay a service call charge to have someone can come out and make an assessment. Once that's done, they can quote you the cost of adding/replacing padding, etc.
If they don't do service after the sale, ask them to refer you to someone in your area that can help you.
Thank you very educative.
@sesha chary - You're welcome!
Thanks much, it helps. I have bought bonzy home recliners, they have 2 years warranty.
@Catherine Chan - Aren't you also the marketing manager for Bonzy Home? Full disclosure is a good thing!
Oh man, I once bought Bonzy off of amazon, sure they are cheap, so is the quality. Utter rubbish, and thankfully I could return without any hassles, thanks to Amazon
Great info thank you.
@PaulCTownsend - You're welcome!
Good video. Thank you. 🌲🌝☘️
You're welcome!
I am 65, and I was having difficulty closing my footrest. I found that if I put my heals at the bottom edge of the footrest, it will close with very little effort. Furthermore, I presume this is because of the proper use of leverage.
Lazy Boy is the only answer! Buy one on sale, get fitted by a sales person and it will last you 30 years with daily comfort. Get one with lumbar adjustment and head rest adjustment
Thank you a lot of information
@Paco Peso - You're welcome!
We need adjustanle (possibly inflatable) lumber and neck roll support.
love your channel
@Yiful Li - Thanks!
Great video alot of good information. One question, are the ones with lower seat being lifted under the knees better ( like in cars ) or the ones that are flat ( paralel with the floor )
Seines -- The angle of the seat is a personal preference factor that I did not cover in the video. And whether an angled seat is actually lower in the back than a standard seat, is a good question. If it is, it could make getting out of these chairs more difficult for some people. I'd try them both out to see which works better for you.
I'm 37 years old I've always slept on the floor and sat on milk crates. I need help.
Perfect explanation. Thank you.
@Valentina Falkova - You're welcome!
I have watched many of your videos; thanks, they are very informative! One question I had: our La-Z-Boy (2018) has begun to make a "ping" sound (from a spring) when it rocks, and we can't find a way to stop it. Do you have any thoughts on a remedy for this problem? THX!
@Nancy Duffer - It's not unusual for motion furniture to develop noises as it ages. In fact, as Rocker/Recliners age, it's highly unusual when they don't make any noise.
Having said that, the thing to do when you hear a new noise -- particularly a loud one -- is to make sure it's not being caused by a mechanical problem. I.E. - parts that are bent, broken, binding, rubbing, loose, etc.
Many Rocker/Recliner models allow a bit of sideways motion by design. An occasional '"ping" type sound may be heard when the springs pull the Rocker Base back into alignment. That's normal and does not necessarily indicate a problem.
Who do you suggest that we use to purchase an electric reclining sofa? We have tried Flex Steel X 2 and Lay Z Boy, all of which have structurally failed within a year. I am a big guy, but 6'5", 250 lbs should not mean that I cannot have a reliable sofa. My serious back issues prevent me from sleeping in a bed and I rely on the electric control to get myself in the "just right" position. Surely there is a company out there that produces a quality, structurally reliable unit. Hope you have a suggestion as we are at our wits end, about to return the LZB for a refund after 3 repair jobs in 6 months.....
@Jon Gordon - Mass-produced furniture, like the brands you mentioned, are not the best quality. They are simply brands that most people can afford. You'll have to spend more to find furniture that has better frame construction and uses better-quality padding.
I work on the mass-produced stuff, so I'm afraid I can't refer you to any specific brands. In my area, Norwalk Furniture is one company that produces better-quality furniture. But as I mentioned, it's more expensive as well...
@@reclinerrepairguy4155 Thanks for the reply. At this point price is not really an object. I am not rich per se, but well off enough to buy a quality piece so we can stop this merry-go-round of silliness. Thanks for the info, I'll check with the company you mentioned and see if they can recommend a manufacturer..thanks very much!!
i have a problem getting up from my recliner because im a lazy fu...
Have you ever repaired an Ethan Allen recliner? They are expensive and I am wondering if that translates to higher quality.
I wear out backs like crazy, because I spend a lot of time in my recliner. Specifically the middle and lower part of the back. I sit in it for about 8 hours a day, for my job. How should I fix this problem? Just learn to repair them and keep fixing them? Or is there a brand that has really strong back and lumbars? Any particular model? Thank you!
@Enermax Stephens - I'm not clear on whether you're referring to padding replacement or frame problems. If it's padding, simply use better quality padding that will last longer. You can have an upholsterer install it.
If it's frame failure, see my Closer Look video series on frame construction on the ReclinerRepairGuy.com website.
Good information. What is the proper height for arm rests? Thanks
@Manape - There are no specific recommendations for recliner arm rest height that I'm aware of. Since people have different torso & arm lengths, I think it would be difficult to achieve a position that would be ideal for most users.
My guess is that manufacturers most likely arbitrarily establish arm rest height as a specific distance from the top of the seat, when designing and building their chairs.
@@reclinerrepairguy4155 i did some serious dhopping at a couple local establishments yesterday. Wow it was eye opening. I learned real fast what would work for me. Your tips about proper sitting position was spot on.
Would have been helpful if you named the gold name brands. The only one I know for sure is Lazy Boy. I recently bought a couch from Ashley that I got a good deal on and I love the look of and it felt comfortable in the store, but I’ve had to modify it by stuffing pillows under the cushions and what. It because particularly the chaise part sinks down super low and gets very uncomfortable.
@DavidMalcolm - If by "gold" name brands you mean top-quality brands, there are no such brands in the mass-produced furniture market. That includes companies like La-z-boy, Flexsteel, Ashley, Catnapper & others.
@@reclinerrepairguy4155 Sorry that should have said good. I was on my phone. You mentioned about getting one from a company that lets you buy parts.
Thank you
@kenmosholder1935 - You're welcome!
Is there a brand you feel is best quality ? I’m short and would prefer 20” or less seat depth and I’m looking for a loveseat that reclines. We bought a La Z Boy Brooks yesterday. But it’s not too late to cancel . Based on your videos, I’m concerned that it may become uncomfortable over time . I really only picked the Brooks cuz we couldn’t afford anything else at that store . And I kept encountering the seat / back gap when I’d recline at other stores with cheaper recliners . La Z Boy didn’t have the gap and the seat depth of Brooks seemed pretty good . But I read that it’s 21” deep . We were in a hurry because they were closing and I need a chair ASAP ! I thought it was in stock there or if not have bought it . We will get it Wednesday if I don’t cancel . My husband loves it . But he doesn’t sit in things long enough to know .
My #1 issue with the new recliners is that the cushions are junk. They are flat in 1 year. Who makes one that stands up?
@Roger Whiting - Yes, low-quality padding and poor frame construction are common in the furniture industry today. To learn more about the different levels of quality out there, see the video, 'Who Makes the Best Furniture / Recliners?' on the ReclinerRepairGuy.com website.
But a much cheaper option (than buying expensive new furniture) is to hire an upholsterer or repair tech to refresh your seat with a higher density (better-quality) foam. IF the rest of the recliner is still in decent shape, of course.
@@reclinerrepairguy4155 I am looking into that now. Thanks.
Offgassing is such a big problem. Just bought a recliner that smells so bad I cannot use it.
catnapper series Recliners are stapled together particleboard frames . broke in 3 months by a tiny woman who is not abusive. I hucklebucked some substantial bracing and cross members to repair . Buyers beware . And to find out they were made down near Tupelo MS, where Action Lane and many known good brands are produced is an embarrassment to the US workforce .
can one use a recliner for a computer chair i only seen one person on youtube that did. this is the computer chair and recliner i was thinking to get but as a computer chair : POWERSTONE Gaming Recliner Massage Gaming Chair with Footrest Ergonomic PU Leather Single Sofa with Cup Holder Headrest and Side Pouch, Adjustable Living Room Chair Home Theater Seating
God bless you,. Perhaps I can use this when I’m able to get another one. I’ve been having a terrible time as I’m chronically ill and pretty weak. I am also in the chair far too much for my liking. In addition to being mentally taxing, it is physically excruciating. I’m afraid I just got another crappy feeling chair I will have to deal with for months if not years, to come. 😭
What is the healthiest, low maintenance soft fabric on a recliner?
@Let It Roll - Microfiber used to be the standard, as for as low maintenance is concerned. (I don't know how healthy it is, however.) Since I don't work on new furniture these days, I don't know what fabric(s) would meet that standard today.
My guess is that most name brand furniture fabrics would not be very healthy because they are often produced overseas with little or no quality control to maximize profit margin.
For "healthy" fabrics, you'll most likely have to seek out companies that specialize in such products. Like companies that produce new carpeting that doesn't leach chemical fumes / odors in your home.
Can a Lazy Boy manual be converted to a left hand activation, like for someone how is right hand impared?
Gary F - Yes, I've heard of this being done, though I've never done the procedure myself.
You'll need to order a new Drive Rod (left-hand version) -- the square, solid-steel rod that runs thru the middle of your mechanism & attaches to the Handle. You should also order (replace) any worn or damaged parts you may have along the Drive Rod, including Retaining Spacers, clips, etc.
A hole will have to be cut thru the Outside Arm Panel on the left-hand side to accommodate the new handle placement. All parts attached to the Drive Rod will have to be removed & then reattached to the new rod.
I recommend using an experienced La-z-boy repair tech for this procedure. Your local La-z-boy dealer should be able to help you with this conversion.
Is there a way to limit the forward rocking I have to push with my hands when I get up and my the chair rocks so far forward and down it’s difficult to get up. We just bought our 3rd set of recliners the others were all gliders these were supposed to be gliders also. I should have sent them back but thought I could get accustomed to it. I’ve had them for a week not satisfied. Also I still have the old recliners would it be a huge job to swap out the glider mechanization into the new recliners
@russelledsall2984 - La-z-boy Rocker Recliner bases can be swapped out with Swivel Rocker bases. But the gliders have a different mechanism.
Let the seller know that you didn't get the correct chair. Otherwise you'll have to "rig it" so it won't dip forward as much when you exit the chair.
@reclinerrepairguy4155 3:34 This exact chair that you demo in this exact time stamp of the video, what model of La-z-boy chair is this? Is this the pinnacle rocking recliner? Also what color is this chair, and is this a micro-fiber recliner, or is this chair made of chenille? Will definitely stop by La-z-boy with my dad one of these days so I can demo a pinnacle recliner before i get one. Can't wait to get a new recliner! a blue soft chenille la-z-boy pinnacle recliner to replace my cozy precious old blue la-z-boy chair i miss so much!
@theblind_guitarist1990 - Sorry, I don't know the model of that chair.
Thank you for posting. Can you recommend a recliner for someone who is heavyset (~430 lbs.) and 6'3" tall? What was the recliner model at the beginning of your video?
@FromHere2Where - You'll want to look for chairs that are specifically made for larger users. Some of them are rated by the manufacturer as to the max weight they can support. Find one rated to support your weight.
Typically know as a "Big Man's" chair, I briefly cover this topic toward the end of this video ---> www.reclinerrepairguy.com/advice_tips.htm#tipover
What about that crazy clunk on the LazyBoy's when you retract the foot rest? Crazy design and unacceptable.
John Gaspar - I believe the manual La-z-boy recliners have always been designed that way. For those bothered by the sound, there's an easy work around. Simply rock back slightly just before lowering the handle. Or, if your legs are long enough, move 1 leg off the footrest and onto the floor. Push against the floor just before closing the footrest. Both methods take pressure off the parts that engage to hold the recliner in the desired reclining position.
Many La-z-boy owners use these methods to avoid the "clunk" sound when closing their recliner. In fact, that's where I learned about it myself, from La-z-boy customers! :)
What chair are you showing in this video?
@True Hope - Sorry, I don't know the style# or name of the chair. The recliners used in my videos are often a few years old or older and are not necessarily still available for sale as new models.
so i have a 1983 lazy boy and there is 3 stages to recline it but stage 2 it wont lock and stay recline what part would that be to repair ?
@tenniearmybarbie1959 - See this video to learn more about the 3-Position Footrest Feature (& parts) on older La-z-boys ----> ruclips.net/video/FjCJAzuY9MQ/видео.html
@@reclinerrepairguy4155 okay so i replaced the teeth oon my 1983 lazyboy to lock in the recline levels but how do i replace the other peice? i cant get the 2 wirer thing apart and off that holds the Ratchet & Pawl
@@tenniearmybarbie1959 - There's usually a set screw that holds the 2 ends of the wire together inside a small metal cylinder. Sometimes the wire remains stuck in there after the screw has been removed. I use a pointy scratch awl that will fit in the hole to try to break the wire loose. It can be challenging & take some time.
Until, say, la z boy can offer a recliner with seat foam option that is high resiliency foam that is at least a 2.5lb density with at least a 35 ILD - i can't buy one, as I'll be sitting in the thing all day every day.
Comparable back padding to match as well.
I may have to shop for commercial grade furniture in order to fit my need; sad.
Brother, with your experience with la z boy failures, you could literally redesign their recliner using better, longer lasting components and then sell them online - I'd would buy that recliner from you!
In fact, if you could acquire a la z boy that fits me and if you would replace the seat and back materials...never mind the mechanical parts - I would buy that new and improved chair from you. Doable?
my husband is 6 feet and I am 5 feet 4 inches. How to decide the seat width which will fit us both
@Vidya's Haute Cuisine - Fit is purely an individual thing, just like the shoe size you wear. When you have to compromise that fit with others -- when purchasing a sofa or loveseat, for example -- the best you can hope for is to find some middle ground where you can easily tolerate the fit not being perfect for both of you.
However, if either of you has to struggle when using the furniture -- opening a recliner or whatever -- that's not a good compromise. A better solution may be to get a separate chair (or recliner) for one person, or perhaps 2 recliners, 1 built to match each individual body type.
@@reclinerrepairguy4155 Thank u Sir for replying to my question...
I have one more question...
can we use a pillow for back support if the seat is wide or will it cause back pain in the long run?
@@vidyashautecuisine720 - You can try that to see if it works for you. But I would recommend using a tall (long) pillow that supports your entire back. And remember, the pillow has to be thick enough so that your leg reach over the front of the seat cushion is correct.
However, even if you can achieve that, the recliner may not operate as well (or at all if your weight causes the nose of the seat cushion to obstruct the footrest) because your body weight is more forward on the seat than is normal.
So, never buy new furniture hoping you can come up with a quick fix to overcome a bad fit, because It may not work. But if you already own furniture that doesn't fit, you can experiment all you like. ;)
Is there a smaller brand that makes excellent quality recliners? I bought push back RH recliners that are uncomfortable and the backs of both of them are loose. Help!
@No Hate - If you're looking for excellent quality, then stay away from the mass-produced furniture brands, such as La-z-boy, Lane, Flexsteel, Ashley, etc. There are better-quality furniture makers out there, but the cost will be significantly higher than most people are used to paying for furniture.
Can you please name a few smaller companies you recommend?
@@reclinerrepairguy4155 It is irritating that you keep repeating this statement. Why not list some makers of higher quality furniture and let US decide if we can afford it?
@@proteus5 - I don't follow the new furniture market, so I don't have any specific recommendations for you.
The last time we purchased new furniture, it was from Norwalk Furniture, 14-years ago. The frame construction & padding was head-and-shoulders above mass-produced brands at that time. However, we did have problems with the cover (fabric). So, for those who might think that paying more will guarantee a worry-free buying experience, think again. That's not always the case.
As for the quality of Norwalk Furniture products today... as I said, I don't follow that. So I would only be guessing at the quality level of their products now.
Buying tips: If the furniture is better quality, the warranty will be better (than the mass-produced brands). Also, you may find examples of cut-a-ways showing actual frame construction -- whether in-store or on the manufacturer's website. Although it helps to know a bit about furniture frame construction, as a general rule, you're not likely to find any cut-a-ways examples of mass-produced furniture. Because that's typically something they prefer to hide underneath the cover. ;)
Also, many furniture companies use low-quality padding. Learn more about padding quality to make more informed buying choices ------> ruclips.net/video/_NwGbCUTG8Y/видео.html
What is the name of this lazy boy recliner, that you are using in this video? Thanks
@Rob Thorne - Actually, I used 2 different chairs in that video. I don't know the names. The first was similar to a Big Man's chair in size. The other was smaller.
The chairs I use are often several years old. Since marketing terms (including chair names) are refreshed from time to time, I'm not sure that the name of an 8 year-old La-z-boy, as an example, would still be in use with their new models today.
looks like the Dreamtime Fabric model
I bought a new recliner with a fridge build right in to it.
Want a cookie ?
Must post photo of this recliner/refridge
You must have done Ph.D in Recliners
👍
Don't buy one from the coaster brand. Mine finally broke with less than 2 years of on and off use. The wood used is so cheap... this should be illegal.
When I sit on rocker recliner, my leg does not touch the floor. Should I buy it or not?
So you always go with the lazyboy brand? Surely those are not made as well these days, right?
@KingdomUploader - I have more experience with repairing La-z-boys. That's why I've made so many videos covering that brand. Historically La-z-boys have also been more serviceable/repairable than most of its competitors in the mass-produced furniture market. (But unfortunately that has been changing in recent years.)
As far as quality is concerned, I don't recommend purchasing any of the mass-produced brands -- Catnapper, Flexsteel, Ashley, La-z-boy etc. Sub-par quality can be found throughout these brands in important areas such as: frame construction, padding density (quality), etc. However, better-quality furniture is not within most people's budgets. That's where my repair videos come in, to help consumers extend the life of their mass-produced furniture when possible.
@@reclinerrepairguy4155 Thank you so much for the time you took in replying. You're a good man in my book.
Now, in your opinion which are the quality brands that don't need frequent repairs and how much are we talking - 3 or 4 thousand or what? IOW, what is the least I'd need to spend in order to get a recliner that I don't have to worry about?
I'm 69 now and would love to die in it :)
Thanks
Oh; I only need a handle/lever manual type - no power or cupholders or any frills.
Thanks again friend.
So lots of experience repairing La-Z-boy & among those brands not recommended to buy. Thank you. Have you ever heard of the brand Ultra Comfort? Very pricey imo & don’t want to make a mistake . Thanks
Could you do work in my home?
@ambizytl - I'm retired now, sorry. :)
@@reclinerrepairguy4155 Just replacing the seat cushion in my Lazy Boy recliner that's over 15 years old. Anyway, I'm in PA and don't even know where you are.
Don't most people buy a recliner until they die in it?
I was going for that, but the recliner gave out before I did.
Why is it hard to find lazy boy recliner parts.....😡
@Gearge Doughty - La-z-boy parts can be obtained thru the manufacturer or one of their dealers.
Tip: They typically deal with warranty part orders. So, if you bought yours used, be sure to tell them up front that you don't want to place a warranty part order, that you're looking to purchase the parts you need. That way they'll provide you with a parts quote up front.
@@reclinerrepairguy4155 They refused to allow me to buy parts, and told me that I *must* contact a local store to order parts. That's a $25 to $35 "access" fee, depending on which store. I am very thankful for people who apparently do machining as their side hustle, and are willing to sell the results of their knowledge!
Most of todays furniture is pure garbage.Valuecity wont stand behind there warranty.You are fucked every way you turn.our furniture literaly peeled off.Suports broke.Cheap wood.Loade with cardboard.Reclining mechanism s broke with little use.Be sure it says real leather and not bonded leather from scraps compressed together.