Это видео недоступно.
Сожалеем об этом.
Cub Cadet Dealer Training Video for the Series 2000 Tractors
HTML-код
- Опубликовано: 15 янв 2011
- This video was produced by Cub Cadet , This video came from the dealership my Late Father worked for for 41 years. The Dealership is now out of service it was known as Clarence Wilson and Son's located in Kimberton, PA.
Oh how rechargeable tools changed everything
Thanks for the video! My series 2000 2166 is 13 years old and this as a great reference for removing the fender to perform a thorough cleaning of the transaxle and fan blades.
Sounds like something I should do on my 2166.
Good video and information.
Tks, very helpful!
Great info!!
We have a 94 hds2135 bought brand new with 1000hrs running strong and have only changed the oil 3 times, buying a second today
Is there a rear axle pin release on a 2140 that is easy to get to w/o taking the entire fender assembly off?
Still running my 1996 model 2165, will be 20 years next year. Only problem was needed new engine after 1000 hours, but found a good buy a couple years ago. Why I need this video - the deck lift assist stopped working and not much out there to help. Probably pins gone somewhere - the handle operates, but not attached to deck lift, somehow. Thanks for this training video - it shows how to get the body fender off so I can see what's going on, and hopefully I'll be back in the field again by June.
Michelle Cameron Now that the body is off I can see that the lift handle assy. weld is busted - the springs are ok, the spiral spring pins OK - but with the weld gone it from the handle to lift mechanis, the whole thing just free-plays up and down. Off to buy some parts.
I have a 3205 replaced parts in transmission / how many inch pounds on oil pan
I bought one of these tractors from a pal. Do you know about what year these were built? It has a 12 1/2 hp Kohler.
What kinda of transmissions do theses mowers have?
I have a Cub Cadet 2206 was working great then all of a sudden it stopped moving and made an awful grinding noise. Is my transaxle shot?
Is there a RUclips how to remove engine coil model 2146 Cub Cadet unbelievable Onan engine
My 2166 Kohler motor 16 horse...just started burping fuel out the carburetor... any ideas..?
That happened on my 18hp Kohler. I replaced the carburetor.
Conrail6370 What Happened To The Series 2000 Safety Video?
What do you mean?
How long will the transaxle last I'm my ltx 1050 ?
500+hours if it does not leak and you keep it clean.
Cannot find this information anywhere, not even in this video ... rear wheel lug-nut & hub-assembly on GT2523 ... What are the torque ratings?
@@JoshAllen17Goated actually, I have now established that it is considerably more than 10ft/lbs!
Wheel nuts @ 75ft/lbs
Hub assembly central bolt @ 200-295ft/lbs!
@@JoshAllen17Goated the figures I quoted, came directly from a Cub Cadet technician by phone, in connection with the wheels of my GT2523. The very reason I spoke to them, was because there was no detail in the manual accompanying my 2004 model.
Cheesy early 2000 vids
They didn’t put oil in the axle ?!?!?!?!?!?!
Don't for get to rate and comment on this video.
Cant agree with you more there :) last good cubs where the 82 series.
ever look into the 3000 series? I have a 3184, 3185 and a 3206. All excellent machines. shaft drive decks, no bullcrap with the mule drive that spits belts.
Video shows how to remove transaxle only. No other info.
1.5 hours..... huh
Only on New machines. Tacks longer on used.
Andrew Manet if you didn't treat it like shit it would work
Sounds like 1.5 hrs ain't enough time for all this work. Can you engine performing this repair an a Nasty used tractor? A mechanic would have to do this same Repair on 5 tractors in one day to get paid 7.5hrs. That's not even a full days pay but I bet the average mechanic would think 1.5 hrs is fair pay. Iv worked for a dealer and been screwed plenty on warranty pay, never again in my lifetime. Pass
Probably the only good thing mud made was the 2165
Thank you I own one works like a mule 1,000 hours
I just realized I replied to my own comment
😕
Old ccc cubs were good too
2000 series? place ramps on dumpster, drive tractor into dumpster. close lids and walk away. your 2000 series tractor is now fully serviced. my parents bought a 2135 brand new and it has been terrible. its ready for the junk yard. i have a 1971 IH built cub cadet 147. i rebuilt the engine now it runs awesome. IH built some great cub cadets but MTD puts the name to shame. cheap, thin metal and bad paint are a terrible combination
MTD = Missed The Dumpster.
Yup. Only good thing on the 2186 I bought was the motor which is going into my bobcat soon. The rest is junk. I love my 3000 series tractors though. Excellent machines and extremely robust and reliable.
LOL 1.5hrs are they fucking insane. I get 2 for a front break job alone and it's only 4 bolts not counting wheel removal. I work 30-35 hours a week and pull down 65-70 hours no wonder the guys that work at small repair shops always look like drinks and drug addicts who else would do that shit.
these are junk
Another terribly designed lawnmower.
I know Wheel Horse showed these corps how to design rear fender/seat pans & floors to be removed in 5 min by one person in 1960s if not before then. Yet companies still use one piece cookie cutter body designs that sucks when its time to repair them.
I see these have a cookie cutter frame not an actual iron frame too?
Just saw one on Craig's I was going to fix & sell but after watching this I see they're not actual Garden Tractors so Ill pass.