Informative video po, may question lang po ako. I've ordered po DTF service before. Yung measurement ng logo ko more or less 0.50" by 0.50". Pero pagdating ng item nagdouble siya lapit na 1". Needed ko talaga na maliit yung logos. Normal po ba yan sa DTF? Naalter yung size nila?
For time saver, use RollPrint software to print data from Acrorip so that we could leave printer prints unattended and no need to wait to insert PET film sheet by sheet.
Sir, pag ka print mo ba, kelangan lagyan agad ng powder? o puedeng after a few hours? lets say 50 pages yung need i-print, puede ba na iprint muna lahat then sabay sabay ipowder?
sir, bat yun sakin, nag aantay ako ng mahigit isang oras bago sya magprint? ano po kaya problema sir? tagal mag loading kasi sir, mahigit isang oras sir
yes, that is the typical type of printing if your setup is set to 1440 / 1440 DPI both color and white. you can less the time if you set it to 1440 / 720 both. just test if it's applicable to you.
ayos sir, next time baka mag start na ako he he he, salamat sa pagbibigay nang time sir, talagang tinawagan mo pa ako
sir very informative.thank you. san ho makakabili ng acrorip?
Nice Paps! Galing..
thank sir sa napakaganda paliwanag....more bless papy
hi maam puwede pong magtanong
Grabe lodi ko tlga to 🔥💯
LODI :)
Informative video po, may question lang po ako. I've ordered po DTF service before. Yung measurement ng logo ko more or less 0.50" by 0.50". Pero pagdating ng item nagdouble siya lapit na 1". Needed ko talaga na maliit yung logos. Normal po ba yan sa DTF? Naalter yung size nila?
For time saver, use RollPrint software to print data from Acrorip so that we could leave printer prints unattended and no need to wait to insert PET film sheet by sheet.
Salamat sa tutorial papi :)
paps pa request nman baguhan lng din ako sa dtf. request po ako video tutorial ng half tone po.. thank you in advance more power!!
Informative galing. Ano pong heatpress ang gamit nyo? TIA
CUYI po
Papi hello dami video mo napanood q pano mo nai move ung red line na nakavertical sa right (labas) ng workspce thank you
Why do I get a distorted image when I printed out? The image is being stretched?
Paps video tutorial naman po kung paano gumawa ng ICC profile sa DTF
which is the best to work with and result? Acrorip or whiterip?
Acrorip White
Salamat sir, ano po ang mas magandang film gamitin? yung 100% capacity or yung 200%? Salamat..
not sure ako boss. gamit ko lng 100% Film
Paps, baka may video ka papano yung Halftone ng DTF?
Salamat dito paps!!
Sir, pag ka print mo ba, kelangan lagyan agad ng powder? o puedeng after a few hours? lets say 50 pages yung need i-print, puede ba na iprint muna lahat then sabay sabay ipowder?
yes pde kahit ilang oras bago lagyan ng powder
How to get colors to match image colors ?
pwede po ba i re use yung film after itransfer nung design?
ndi na paps.dispose na after ng 1 beses magamit
Paps naka dongle yan?
Good day sir alam mo po ba kung bakit ayaw lumabas ng ink habang nagpiprint? sa DTF printer po. salamat
papi anung mga tshirt ang compatible or best para sa DTF
khit ano paps. CVC, cotton or anykind ng shirt pasok si DTF
@@papsmauivt4685 paps anu ba mas maganda l805 or l1800.. para sa starting plang ng dtf printing?
@@rengimoi9319 L1800 paps
paps bakit yung acrorip ko ayaw ma bago setting sa menu ng printer at color tas wala yung YKWWMC?
Earned a sub papi!
Apakahusay paps maui
Paano po kaya ung akin di sya nag priprint sa acrorip ko wala syang printout
anong klase tela po sa dtf ? naka like subs na po ako
kahit anong tela paps pwede. CVC, cotton, drifit at halos lahat ng tela pde kapitan ng DTF
Blinking ung l805 ko papi bakit kaya
LODS, Do you guys have a idea how to fix deform pictures when printed on L1800? It stretches out the picture pls help. Thank you!
Ok kayo lambe kayo
SIR BAT YON AKONG APP ACRORIP WALANG WHITE
sir, bat yun sakin, nag aantay ako ng mahigit isang oras bago sya magprint? ano po kaya problema sir? tagal mag loading kasi sir, mahigit isang oras sir
Lagi pong nag eeror yung printer ko pagkalahati ng yung print napalitan nadin yung cr motor . Ano po kaya possible problem 🥺
papi ano po brand ng DTF ink po nyo?
honjet paps pero any brand pwede
sir pwd maka hingi ng download link ng acroprip 9.0.3
Sir pano nyo po dunudugtungan ng papel ung film? Lagi rin po nasisira ung print ko sa dulo. Salamat po
same problem ko to
Sir pede po ba makahingi ng settings for black tshirt ? Pag nagprint po kasi ako andilim po ng kulay nya sa black tshirt.
Ff
sir nakuha mo na ba setting para sa Black Shirts? Same problem sakin, madilim tlga ung print kahit ginaya ko ung setting ni paps dito sa vid
Sir good day saan po makakuha ng software na yan may nadodownload po ba nian? salamat po..
meron akong isang video paps. doon pde mo download
sir may dongle po bayan
wala paps
hy sir i have problem , when i want to print acrorip taking too much time for printing like 15 m :/ can u help me plz sir
yes, that is the typical type of printing if your setup is set to 1440 / 1440 DPI both color and white.
you can less the time if you set it to 1440 / 720 both. just test if it's applicable to you.
pde humigi ng acrorip9 installer
meron akong isang video nandon installer
@@papsmauivt4685 ayw p din mag success s command, access denied lgi nlbas
Lods bat di nag print akin bago lng ako haha kakabili lang kanina
paps install muna driver ng printer
so slow explanation and we need clear demo to change all types of paper not only A3+ !!