SCRATCH BUILDING AND COVERING A BALSA WOOD WING //ULTRA RC
HTML-код
- Опубликовано: 20 авг 2024
- Ever built a balsa wood wing from scratch?
Well we have and in this video you can see how!!!
Cut out the airfoils
we winged it
(get it )
anyway you could download an exact one.
we made these slowly get smaller
then add groves
cut strips
put strips in grooves
ad some glue
fiddle perfect, sand
get tissue paper
glue it on with uhuh
sprey with mentholated spirits and water 50-50
sand of excess.
mount to pre prepared fuselage
throw and be happy!!!!
make video and share your build
All filmed on my phone!!!!
THANKS FOR WATCHING ULTRA RC!!!!!
visit my channel for other awesome videos!!!
/ @corinkersten
and on Facebook!!!!
/ ultrarcvideos
BY FOR NOW!!!
Thank you so much, started looking into how to scratch build these things, but now my plan is a 2 meter wide wing span so this will be fun
Thanks for watching ULTRA RC mate!!!
Yeah good plan it is pretty much the same but cover with ultracote not tissue, and just scale it all up,
Good luck cheers
It is nice that you translate your ideas into action and this is solely creativity👍👍
Thanks so much mate i appreciate your support!!!!
You have some real nice weather! The weather by me is wet and cold!
Yeah it was 50c the other day!!!!!
Thanks for watching ULTRA RC mate!!!!!
Looks fun!
Very nice video big thumbs up my friend XD
Pretty cool stuff.
yeah its good fun!!!!
Thanks for watching this awesome ULTRA RC video mate!!!!!
nice build, thanks for shairing, my question is why use methylated spirit with water, why not just water spry?
Yeah good question, im not sure to be honest, but
This is what my friend said to do so ill ask him and let you know. Thanks for watching this awesome ULTRA RC video mate!!!!!!
methylated spirit aka alcohole is used to reduce the shrink rate :)
Awesome, balsa wood is a bit thick, but it breaks sort of easily, but it is very soft! It feels like foam, right? I used it at school
What kind of paper did you use?
Very nice plane.
Just tissue paper mate
Thanks for watching ULTRA RC!!!!!
awesome build mate i love the wing too
yeah!!!!
Thanks for watching this awesome ULTRA RC video mate!!!!!
you got to do the spin test, I do this with every wing :) 5:33
Pretty cool
Thanks for watching this awesome ULTRA RC video mate!!!!!
sweet...not many people build as they use to.....nor do I....lol
yeah i love every aspect of the hobby!!!
Thanks for watching this awesome ULTRA RC video mate!!!!!
Nice build bro 😎😎👌👌👌🤘🤘🤘
Thanks for watching ULTRA RC mate!!!!!
Good
Thanks for watching this awesome ULTRA RC video mate!!!!!!
If you're watching and want to download a glider plan - google - "carbon crimson glider rcgroups" - they have detailed plans / steps / photos. My latest thinking though is a hybrid hotwire foam wing approach + with carbon tube + Laminate foam wings cores with brown kraft paper / maybe balsa fuesalge would probably give best buck.
Thanks for the tip mate!!!
Hot wiring is a great method!!!!!
Thanks for watching ULTRA RC mate!!!!!!!!!!!!!
hai...what kind of tissu paper you use?
Thanks for watching ULTRA RC mate!!!
I appreciate your support!!!!
Sorry for late reply but i just used tissue paper from a craft shop the thin stuff hope that helps cheers!!!
thanks for posting. good work. here are some things to consider. at 1:50, i KNEW things would go sideways, pretty soon. it appears that the design of the wing does Not include a (fuselage-spanning) center-section. next time, SPLURGE. invest in some PINS and WAX PAPER and a suitably-sized piece of Foamboard. build the wing ' UP ' by starting with the LOWer spar; Pinned in PLACE, on wax-paper, to a piece of foamboard. for precision of assembly, draw-up the rib layout (using a t-square, etc.); put the drawing Underneath a piece of wax-paper; on top of foamboard. ribs (and Most of the elongated bits) can be held in place, without damage, by using 3 pins, per rib. at 3:35, make Notches in the trailing edge piece, to receive the ends of the ribs, for a Better Join. at 3:47, just W R O N G. a wing Should Have a CONTIGUOUS leading edge component. one method is to make a 90-degree notch at the forward end of each rib, to receive (at an Angle) a Square/Rectangular piece. or see my tutorial. it appears that the wing has Zero dihedral. if so, and it is used as part of a rc model, the model will NOT turn, in response to rudder inputs. cheers googletranslate
in linked drawing, the use of a Square, and Contiguous leading edge component is indicated
www.laser-design-services.com/Ace%2020%25%20straight%20wing%20plan.JPG
Thanks for taking the time to write!!!!
I have built a few balsa kits before and,
yeah i normally use wax paper and pins for my builds.
we gave the wing a bit of Dihedral but not much i agree
and really this was not intending to be RC any time soon though it could be!!!!
we were just having fun with what my friend had and thought i should make a video
I just checked out your channel and you really are a pro!!!!
that build is really awesome!!!!
Thanks for watching this awesome ULTRA RC video mate!!!!!
I appreciate your support!!!