Looks great and will help if space is needed. I like that if you have a need for something you are not afraid to figure it out and do it! Girl power! 👍AWESOME
Ty so much. I've watch so many videos in how to make this and your is by far the much easier and more beautiful. Ty again. I hope I can get mine as beautiful as urs
That is awesome, I have been wanting to make one of these. My kitchen is super small and this will give me some more counter space. Thank you so much for sharing this with us.
Well...... you remember the time when everything was so busy u just wanted to stay home todo all things that you needed to do......well here we are getting everything we needed to do...🤪🤪🤪🤪
I dont normally comment on yt videos however thank you for making the video nice and simple! I dont need to buy 6+ hardware drills and gadgets! Btw I have the same exact wood, what size screws did you buy?
I’ve made one for a gas stove before, so what I did was make the board as usual. And then went to Lowe’s and picked up some cabinet feet. I believe it was $2 per foot. And then you have to drill wholes for the screw to go through on the bottom corners of the stove top cover. I also applied gorilla glue for better hold. I wish I had a picture of it! But it was about 3 inches high
Stay Home With Natalie Nicole ok, thank you 😊 I just love your decorating and crafting videos! So happy you started your own channel, so now we can see what you do with all your great finds from the dumpsters 😃
You are so welcome my dollar tree didn't have the products that she uses in her video so I walked around the store and I came up with bamboo cutting boards 10 of them and wooden rulers for extra support and those long skinny wood pieces that have cute sayings on them that you can stack for decor to raise it high enough 😉
I noticed your work table is a pool table. I asked my husband if I could use that as a work bench! His was response was no way!!! I am going to make a stove board though.
If you make these for a living Jon, don’t follow these directions at all! The process used was too labor intensive for a shop and many practical shortcuts are available that won’t take away from the beauty of the final product. Follow these directions in the video and calculate your labor and you’ll see your profitability get eaten up
hi natalie, i'm having a hard time finding front screw handles that I like. you started with the project showing a different set of black handles. did you end up not using those because the screws were too short and aligning the screws would be difficult? just wondering if there was a solution to using those handles with back screws. thanks so much for your reply!
I honestly have no clue, I do know at my Lowe’s is was $6 for a 12 foot board of it. You can choose whatever kind of wood you prefer for it! I just went with the lightest and cheapest one!
Beautiful job! Loving your page!
Looks great and will help if space is needed. I like that if you have a need for something you are not afraid to figure it out and do it! Girl power! 👍AWESOME
Thank you! ☺️
Love it making me one thanks for the video
Turned out beautiful, great job.
Thank you!
Love it!!! Women power! You really inspired me!
Ty so much. I've watch so many videos in how to make this and your is by far the much easier and more beautiful. Ty again. I hope I can get mine as beautiful as urs
I love this! Stay safe and healthy
Very lovely saving it for my own top cover Thank you
Wow that’s cool and thank you for sharing your amazing video 🍀🍀💞💞🍀🌸🌸🌸🌸
Thank you!
That is awesome, I have been wanting to make one of these. My kitchen is super small and this will give me some more counter space. Thank you so much for sharing this with us.
cbearce1 it is a great way to have some extra space!
Thanks for sharing this! Hope you guys are staying safe and doing well!
Thank you! And we are doing well!
Love it
this was adorable! LOVE IT!
That was so interesting. I have never anything like that, let alone someone make it. Great look , great instructions. 😊
Love it thank you for sharing I hope you guys are doing well take care ❤️
Thank you! And we are doing well! ☺️
LOOKS REALLY COOL GIRL LOVE IT !!
Well...... you remember the time when everything was so busy u just wanted to stay home todo all things that you needed to do......well here we are getting everything we needed to do...🤪🤪🤪🤪
😂 so true! But I still have to work since I work in the medical field but finally had a few days off to get this made!
Oi" Natalie excelente trabalho👍👍
Love it!!!! Cap you seal it after you put the stencil? How long in drying time in between, stenciling and staining?
😍 love it
Mitzi\ Southern comfort thank you!
Good job! Thank you.
Thank you!
I dont normally comment on yt videos however thank you for making the video nice and simple! I dont need to buy 6+ hardware drills and gadgets! Btw I have the same exact wood, what size screws did you buy?
Omg I love it!!!!! Gosh I wish I was as creative as you, you definitely have a gift!
Thank you!
Awesome project. What sealer did you use? Stay safe. ❤️Blessings.
I used some left over sealer from a previous project. But it had polycrylic in it.
Yay I've been waiting for this 😂
Love this😍♥️ How could I make one for a gas stove? I’m trying to figure out how to make sides to set it up higher over the burner covers....
I’ve made one for a gas stove before, so what I did was make the board as usual. And then went to Lowe’s and picked up some cabinet feet. I believe it was $2 per foot. And then you have to drill wholes for the screw to go through on the bottom corners of the stove top cover. I also applied gorilla glue for better hold. I wish I had a picture of it! But it was about 3 inches high
Stay Home With Natalie Nicole ok, thank you 😊 I just love your decorating and crafting videos! So happy you started your own channel, so now we can see what you do with all your great finds from the dumpsters 😃
Kelly Barlow Creations has a video on how to do this for a gas stove and you should be able to get the stuff from the dollar tree
TINA MAYHLE oh great!!! Thank you!!
You are so welcome my dollar tree didn't have the products that she uses in her video so I walked around the store and I came up with bamboo cutting boards 10 of them and wooden rulers for extra support and those long skinny wood pieces that have cute sayings on them that you can stack for decor to raise it high enough 😉
What color NAME is the stain it’s so hard to find one that looks good but I love this color. Thx for sharing.
did you add a top coat of poly or anything to protect the board or to seal the paint?
I used a protective top coat that came in a cabinet restoration kit. It’s basically Polycrylic
I noticed your work table is a pool table. I asked my husband if I could use that as a work bench! His was response was no way!!! I am going to make a stove board though.
I make these for a living and i always stain to dark. Any advice is greatly appreciated
If you make these for a living Jon, don’t follow these directions at all! The process used was too labor intensive for a shop and many practical shortcuts are available that won’t take away from the beauty of the final product. Follow these directions in the video and calculate your labor and you’ll see your profitability get eaten up
hi natalie, i'm having a hard time finding front screw handles that I like. you started with the project showing a different set of black handles. did you end up not using those because the screws were too short and aligning the screws would be difficult? just wondering if there was a solution to using those handles with back screws. thanks so much for your reply!
Just buy any cabinet handle you like
Looks very nice 👍
Thank you!
I love this. Been wanting to make one. What type of wood is that?
I honestly have no clue, I do know at my Lowe’s is was $6 for a 12 foot board of it. You can choose whatever kind of wood you prefer for it! I just went with the lightest and cheapest one!
What size are the pieces of you used?
Does this work with everystove
❣️❣️❣️❣️❣️❣️
☺️
Are these 1x3’s?
nice DIY and i got linked to your channel from the daly diver so 1 more sub from me ;)
best regards from an scrapper and golddigger in sweden ;)
❤👍🏻🙏🏼
☺️
I’d love one of these but my cooker top has a sensor and if you cover it, it beeps and beeps, drives me nuts! 😀
It would have looked much better without the big gaps between the boards.....