ISDT Pro WIth Parrallel: bit.ly/2LFfXLw ISDT Lite: bit.ly/2YtcVSm Xt30 Micro Board: bit.ly/2FV5pEv ISDT Pro with Power Supply: bit.ly/2ZAgKkR ISDT Parrallel: bit.ly/31r2bkp
I love my isdt Q6 Pro 300w/14a.The only thing I dont have any BattGO batteries so i havent used BattGO function. Yes i did have to use a 24v300w power supply, but it was only 25$ and works great.
imcrazy 69 I’m afraid, there aren’t any goggles below $200 that are like fatshark style. Eachine ev800d are good but they are like $90. The aomway v1s however are at about ~210 right now and those are good for the money. Hope this helps
I know it’s an older video, i had mine make a pop sound while parallel charging 5x 4s 1500mah batteries off a 24v power supply, siren, and now it says current operation not available. Does this have an internal fuse? I think somethin popped but i thought this thing was a smart charger and had all kinds of protections?
Hi, thanks for all the content you make, your videos really helped me doing the right choices to build my first drone 2 month ago. I'm looking for a battery to input DC to my charger(Hota D6+), what would you recommend ? I saw a Tattu 3S 10 000, is that good or do should I take a battery with higher cell count ?
Awesome video dude could you please consider doing a detailed build video of the camera drone set up. Good detail in the video and Thank you for your efforts in making this videos , rock on dude 👊👌👏.
I have the pro version and whenever I charge above 7 amps the charger turns off. The question I have is that the charger problem or the power supply problem( I use a modified laptop charger ) thanks
It's your power supply.. Check the links there is a combo that comes with the power supply.. Made specifically for this. So you will be able to purchase it separately
Love the Q6 I have one too but the discharge takes forever. Not sure why but no matter what I put thr discharge rate at it stays locked to some low amount. Can't remember the exact amount but it's like less than one amp. Not sure why it does that, do you experience the same thing?
@@Cre8ionz.considering the fact that you can use this as a field charger with a large lipo pack as a power source it would be helpful to figure out how to discharge unused packs at a faster rate to put some of the charge BACK into your bank to help save your daily packs from having to be fully charged for an extended period of time. Not everyone is using this device strictly at home using house current. In this instance it would be helpful to find out why it caps out discharge rate at such a low amperage. Taking 2 plus hours to discharge a 1550mah 4s doesn't seem right to me.
Great Video. I printed A case for a Q6 pro Together with a parallel AMCC charging Board for 6 x 2-6s. Together with A second charging Board i Charge 12 4s Batteries mixed 850mha to 1500mah with 14a. This with an old Laptop Power supply. Is really great! Perhaps if you ganna go secure, get the Bardwell parallel charging Board which can Charge 10 lipos and has electronic fuses for each cell.
Hopefuly people dont get the dreaded "Abnormal battery connection" issue with the ISDT Safe parallel board. It is a real pain in the ass for a lot of people.
I can honestly say that iSDT is total crap. I had two Q6 Plus and one D2 and the three of them didn't last 6 months. Battery connection issue. Same with the two a buddy of mine had, one Q6 plus and one T8, and also, the discharger (that can't balance while discharging). And last week, the SC-608 of another buddy of the group died. They are convenient because of the size, but they are total crap. My original SkyRC iMax B6 is still working after nearly 15 years...
Your the first I heard complain.. The only time I heard about these is the calibration but I cant be sure its calibration or the person's battery just doesnt hold charge so I did not bother getting into the details. Well this info is very useful for everyone. However I had the q6 lite for about a year now and its working just fine..
ISDT Pro WIth Parrallel: bit.ly/2LFfXLw
ISDT Lite: bit.ly/2YtcVSm
Xt30 Micro Board: bit.ly/2FV5pEv
ISDT Pro with Power Supply: bit.ly/2ZAgKkR
ISDT Parrallel: bit.ly/31r2bkp
Can i charge and test the resistance of 12v or 24v ups batteries ?
I love my isdt Q6 Pro 300w/14a.The only thing I dont have any BattGO batteries so i havent used BattGO function. Yes i did have to use a 24v300w power supply, but it was only 25$ and works great.
Hii, what are the best goggles under $200??
imcrazy 69 I’m afraid, there aren’t any goggles below $200 that are like fatshark style. Eachine ev800d are good but they are like $90. The aomway v1s however are at about ~210 right now and those are good for the money. Hope this helps
Safe more money and buy Fatshark.
There's no reason to buy Eachine or whatever cheap Googles ..without warranty/costumer services..
... So if you have any problem, Fatshark will always help..
Others won't..
I know it’s an older video, i had mine make a pop sound while parallel charging 5x 4s 1500mah batteries off a 24v power supply, siren, and now it says current operation not available. Does this have an internal fuse? I think somethin popped but i thought this thing was a smart charger and had all kinds of protections?
Hi, thanks for all the content you make, your videos really helped me doing the right choices to build my first drone 2 month ago.
I'm looking for a battery to input DC to my charger(Hota D6+), what would you recommend ? I saw a Tattu 3S 10 000, is that good or do should I take a battery with higher cell count ?
This is great device and you should get a higher cell count at least 4S 6S preferably you would get more watt hours
@@DroneMesh Ok thanks for the info ! Have a nice day.
Hey ! Nice channel, just subscribed ! A good introduction to MCU programming with C for Quadcopters ? Any link or courses to suggest ? Thanks mate!
How do you hook the ISDT to a car battery ? Is it safe ? lol
Hi. Have you tryed the toolkitRC M8 charger? I've heard that it is a really good charger after the firmware update.
Any inside on this??
Awesome video dude could you please consider doing a detailed build video of the camera drone set up. Good detail in the video and Thank you for your efforts in making this videos , rock on dude 👊👌👏.
Great review, dude! 😊
But ISDT... There's not much to talk about. They're great! 😊
Have you checked out the HOTA D6 Plus yet?
I think its the new best A/C charger
Yep! That's what I use. I've been using that and I also bought the older D6 Pro to compare them. I like them both for different reasons.
I have the pro version and whenever I charge above 7 amps the charger turns off. The question I have is that the charger problem or the power supply problem( I use a modified laptop charger ) thanks
It's your power supply.. Check the links there is a combo that comes with the power supply.. Made specifically for this. So you will be able to purchase it separately
Love the Q6 I have one too but the discharge takes forever. Not sure why but no matter what I put thr discharge rate at it stays locked to some low amount. Can't remember the exact amount but it's like less than one amp. Not sure why it does that, do you experience the same thing?
It's a charger !
Not a discharger.
I think it's rated for 8 Watt discharge.
@@Cre8ionz.considering the fact that you can use this as a field charger with a large lipo pack as a power source it would be helpful to figure out how to discharge unused packs at a faster rate to put some of the charge BACK into your bank to help save your daily packs from having to be fully charged for an extended period of time. Not everyone is using this device strictly at home using house current. In this instance it would be helpful to find out why it caps out discharge rate at such a low amperage. Taking 2 plus hours to discharge a 1550mah 4s doesn't seem right to me.
@@Jahoosapheth putting charge back into your big field battery is a waste of time..
Buy a discharger and be happy :)
Great Video. I printed A case for a Q6 pro Together with a parallel AMCC charging Board for 6 x 2-6s. Together with A second charging Board i Charge 12 4s Batteries mixed 850mha to 1500mah with 14a. This with an old Laptop Power supply. Is really great! Perhaps if you ganna go secure, get the Bardwell parallel charging Board which can Charge 10 lipos and has electronic fuses for each cell.
I like it. I have a deep cycle 12v lead acid and solar panels in my truck so this would work 👍
please check out the new Aikon RD32 f3 45a esc, 43 bucks with minimal filtration pleaaaase, thanks for your good content
Hopefuly people dont get the dreaded "Abnormal battery connection" issue with the ISDT Safe parallel board. It is a real pain in the ass for a lot of people.
Just update the Firmware!
@@Marvin-Berlin_FPV is that a proven solution?
@@brettm.1770 It is written in the Update notes of isdt
@@Marvin-Berlin_FPV Thanks!
I can honestly say that iSDT is total crap.
I had two Q6 Plus and one D2 and the three of them didn't last 6 months. Battery connection issue.
Same with the two a buddy of mine had, one Q6 plus and one T8, and also, the discharger (that can't balance while discharging).
And last week, the SC-608 of another buddy of the group died.
They are convenient because of the size, but they are total crap.
My original SkyRC iMax B6 is still working after nearly 15 years...
Your the first I heard complain.. The only time I heard about these is the calibration but I cant be sure its calibration or the person's battery just doesnt hold charge so I did not bother getting into the details. Well this info is very useful for everyone. However I had the q6 lite for about a year now and its working just fine..
3 x ISDT Q6 -> working perfect for 3 years now...
A fully charged 4s lipo ain't 14.8v. Storage also isn't 14v. silly goose.
Yea I noticed the screw up.