ISDT Q6 Travel Case by Turtle Labs
HTML-код
- Опубликовано: 1 июл 2019
- Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: www.fpvknowitall.com/ultimate...
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: www.fpvknowitall.com/support-me/
---
The Turtle Labs ISDT Q6 case is a stylish and safe way to transport your charger. In this video, I'll take you through the steps of assembling the case.
-- PRODUCT LINKS --
I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.
Purchase the Turtle Labs ISDT Q6 case kit at:
turtlelaboratories.com/produc...
Purchase the Seahorse 300 case at:
amzn.to/306NpOS
Purchase the ISDT Q6 at:
* Banggood - goo.gl/YmK3N8
* GetFPV - goo.gl/AiAF9e
* ReadyMadeRC - goo.gl/Jt3RjB
* Amazon - amzn.to/2IiVdI8
* Rotor Riot Store - bit.ly/2xWVp8W
Purchase the 750 watt HP power supply at:
amzn.to/2xtkXKI
3M foam mounting tape is:
amzn.to/2J4jj9c
MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
Most or all links above are affiliate links, and I will receive compensation if you use them.
-- OFFICIAL GIVEAWAY RULES --
1. Any entry that does not comply with RUclips's community guidelines (ruclips.net/user/ytpolicyands...) will be invalid.
2. Parts of the prize were provided by the vendor. Parts were purchased by me.
3. RUclips is not a sponsor of this contest. By participating, you must release RUclips from any and all liability related to this contest.
4. Personal information collected for this contest will be used for the sole purpose of selecting a winner and delivering the prize.
5. Official cutoff for entries is midnight, July 5th, 2019.
6. Winners will be selected using Sandra Cires random RUclips comment picker, or some functionally equivalent method.
7. You may enter the giveaway by commenting ONE TIME on this video. Any user who makes multiple comments will be disqualified because this would equate to multiple entries.
8. Prize will be as described in the video: the charging box, ISDT charge, and power supply shown.
Giveaway winner is posted here: ruclips.net/video/J17Q3-Vatoo/видео.html
Power me up JB!
As a person who likes neat boxes, foam cutouts and have my drones and equipment in an expensive Americases. This charger is right up my alley. I love the design and my wife is an electrician who can make sure it safe. Love you channel and the hobby. Thanks for all your efforts for so many.
JB, I come from a IT background and I find that your content is the most helpful for me to get into this hobby. Please keep up the great work.
Joshua, I certify that I can fully appreciate the work you did to assemble this quality solution to a real problem! Great video as always. Jim
As always, I've learned something today! It would help check one more box of components I need to get flying. Thanks for all you give the community!
Just finalized my first quad build, so this kit would really help me get going!
My charger burnt up yesterday, I ordered a cheapy. My lipos are probably gonna die before I get it.🤬 So far every peice of knowledge I know came from you and your channel literally! If I wouldn't have found your channel I would have gave up! From Betaflight to batteries, to capacitors...You saved me time and money! Thankyou
*Charge me up, on the go-go....
Lol
That case is probably the most valuable item I would carry to the field. I followed your build and I am sure you performed an excellent job on it ! I will definitely take it with me if I am the lucky one! Thank you Joshua for this opportunity !
Such a cool case! I've been thinking about making a case for my charger and I would never thought of all of that. Nice work JB!
Excellent build! I like that you don't edit out mistakes. Don't change.
Yes I'm a number 1 :-D I love filling the entire trunk everytime I go out to fly. I'm also an electrician so no problems in handling mains power.
I kayak and use a battery box with all the ports and plugs you could want. This thing is right up my ally! Probably build my own though, but love it!
Thanks Joshua for everything you do for the drone community.
This charging box looks awesome. Thank you for the chance to get one.
I'm getting started, a charger is on my list! Here's hoping and thanks for the build video.
Looks like a great charger! Thanks for building it and giving back (more) to the community!
I need that juice!! As always thanks Bardwell, a lot of people would be lost in fpv without you dude! Me included!
Yes that’s super nice thanks for always giving back to the community!!
I've been thinking about getting a mobile charger so i don't have to have so many batteries - this would be awesome. thanks for the opportunity, and thanks for all your awesome videos - especially the learning to fly series - those helped me a ton!
very fancy! I like it also with those safety features added like the fuse.
A big thumb up from France! Of course I'd love to win this, but the most important is that you keep on doing your amazing job. You're one of the persons who gave me strength and courage (and of course knowledge) to enter the FPV world, and that was such an incredible thing, that I feel like I already won a present!
That’s a nice kit. I also like your assembly skills and attention to detail. Nice job Joshua👍
I'm super excited that there is a possibility of winning this. I may have to just go ahead and grab the kit if I don't. Thanks Joshua!
Thanks, Josh, for all you contribute to the community.
I love your channel. Been watching a very long time you inspired me and also the riot crew to get me started into fpv ive been flying little over 5 months now and you've taught me so much and I thank you for it ✊✌
This would be great for my flying. I fly at alot of places away from power. Thanks for offering stuff like this for people.
I love these techy videos. Building my own porta-power style system atm.. Just waiting for the parts to finish printing . Great tools to have.
I promise I will double check you work! Thanks for another terrific video Josh!
I love this JB! Thanks for sharing your knowledge with us
Yesss, another organized compartment for friends to tease me about! Thanks JB
That's freakin awesome! That would be really handy to have as my lipo charging setup is a bit disorganized. It's nice to have everything in one place. I've been wanting to upgrade to an iSDT charger and this would be the ultimate setup!
I also don't comment often but keep up the great work 👌 your videos have saved me countless hours of setup/struggle time with my quad.
I have a lot of stuff too but this would be perfect to keep at home or when going to the field when I pack more stuff and have a bench to work out of. Thanks!
Awesome idea JB! Thank you and good luck to everyone!
I think It's great. I saw you build it so I learned how to service it also. That alone one up's Botgringer.
Thank you so much for your nice videos about Betaflight and so on... I am one of the guys with a lot of boxes for everything. I like to have everything clean and tidied. It looks nice...
Awesome video Joshua, I really love your content and what you do for the community! This product is so amazing and your knowledge on anything you encounter is crazy to think about! Awesome content, keep it up!!
I hope to be doing more traveling with my quads soon, so this looks like a thing I might want.
Yor wiring was good enough for me as a sparky. May redo a few things, but you did a good job
Now that's one cool box! Added to my wishlist.
Thank you so much for all your work and help educating us and helping the community, keep it up :)
It looks very neat and nice. Thx for the info JB.
Very nice work JB! LOL @ the disclaimer at the end 😂
Hey Joshua, you really helped me out on ordering the right stuff for my first quad! And also thanks for all the tech tips and videos, keep it going. You are great! Greetings from Germany! :)
The charging case looks sweet with the JB logo on it! Thanks for all the knowledge!
Thank you for the walk through. Totally doing this
Whoop Whoop!! A Bardwell build video! How I've missed these. Keep up the amazing work!
I always look forward to watching new vids from you. Keep up the great work !
Nice case for mobile charging! I would love to ditch my current mobile setup for something cleaner and more organized. Thanks for sharing and I definitely learned something today.
Awesome build video, it's a really cool idea to do a Pelican case build like this for all your charging needs!
I'm usually the throw everything in a bag type but that case looks great!
That thing is awesome! I Love your videos. I learn so much, and you are a great teacher.
Nice kit! You're da man JB, good luck to all!
That’s awesome. Thanks for all your videos. They have helped me a ton!!!
Hi JB !
Love your signature product and this case would fit perfectly to power up your signature parallel charging board that help power your FC and ESC !
Please Power UP a french Fpv guys.
Thanks for helping us new comer to FPV by knowing it all !
Constantly thinking outside of the "box" is what keeps this sport moving forward. Nice job.
Looks like an awesome case. Looking forward to the next video.
I hope I get this I’m new to the hobby thanks josh for all The hard work iv learn a lot from your videos
I love the geeky power case JB!
Love the videos JB keep up the great work. That case is awesome
Hey jb, this is great timing as I recently burned out the 3s balance circuit on my charger! It isn’t impossible to work with as I fly 4s and my tx goes off 2s, but I do have 3s batteries that I use for other things and I hate using the $10 3s charger from Amazon where I can’t discharge or change the charge rate or anything. As I was saying, this is great timing because I was just starting to look at a new charger to get and the isdt q6 came up on my radar.
Really useful piece of kit, thank you for another superb tutorial Joshua.
Hey Josh looks like you did everything right on the plug-in I'm a certified electrician I wouldn't worry about it but it would be cool if I got picked for this plus my charger that normally use took a crap thank you for all your good content really appreciate it be taught me alot
That ISDT Q6 travel charger case is sick!
JB thanks for all your hard work
Great video as always! This seems like a handy gadget when traveling.
Just starting this hobby, so this would be a great start to it.
I love organizing cases for things, considering getting a Peli for my drone stuff instead of a bckpack.
Have dine several cases with my own custom cut hard foam for my airsoft weapons.
This is so slick. That is Josh for the heads up!
Yep, add this to the list of things I never knew I needed.
I could use it! Thank you Mr. Bardwell, we learned something today🤙🏼
Just started FPV, this would be a great addition.
And yet again I learnt something. Fantastic videos keep up the great work.
I'm definitely the kind of person who like organised stuff. I need that box !
Thanks for your hard work for the FPV community
I have an old hobby people activator, would be nice to get one of those :). Awesome product! Happy flying!
Clean build. That looks great!
Clever setup. Keeps the setup tidy.
Woop woop. I agree to do the mains myself, i am certified! Also need this! So cool.
Awesome! I think I’m the 2nd kind of person, I like to keep things neat and use space wisely
I really liked this video. It’s good to see a build video.
Great video, Joshua. I quite like this case. I especially liked Botgrinder's "How its made" style assembly video
Thanks for all the vids you make buddy. Very helpful 👍🏼
I really enjoy your content, thanks for all you do.
Really want! Plus I love the jb logo on it and would really help my charging situation atm on the road and even at home
Nice build! Perfect for the beach.
Awesome piece of kit, JB!
Looks good! Thanks as always for the awesome job!
Thank you for this and all the other brilliant videos!!
Love this video. thank you for making it. Could you recommend a field drone charging kit for 2021?
Thank you JB! Keep up the good work!
Love how the channel and how it's growing man, keep it up JB.
Hey JB nice work, i always learn something. Nice charging case, Ill take it.
great stuff jb.i teach 12 kids in my area who are introuble alot as i once was.this would be great for us while in the field.we have been lucky and donated many items from great companys but the one thing we dont have is something like this.so our fingers are crossed jb.tale care friend
Awesome opportunity thank you for all you do for us!!
Great video as always Joshua. Informative and entertaining.
This would be great for home use. I don't have a work space for my hobbies, so I need to stow my stuff each time I'm done using it and this would make it easier.
This looks super cool, would be really handy at the field
This would be perfect for my workshop, keep up the good work Joshua.
Awesome build JB!!
Thanks for the sweet piece of kit.