I just discovered the power supply functions on all of my chargers and it has been really useful to test old FCs, ECSs and RXs that I thought were dead. Now i can build Franken-kwads out of resurrected parts.
just got one of these today mijne came with a screen protector and my glass is perfect i think you got a test unit lol. thanks for sharing the info also there is a firmware upgrade on this already
hi I had a question! condition, what is its use in this charger and why is it between 4 volts and not more for pb??? Does it show the voltage of each cell?
the icharger x8 have a more powerful power supply 30amps at 36v that can nice blow up sparks and it can also auto turn on when the charger is turn off and on
For the ISDT Q6 I've bought a Xiaomi Dashcam Glas screen protector.. It's just covering the screen.. No scratches so far, but dust inside the charger.. "under the screen"
May I ask a question? I use lipo battery charger Q8 Isdt 1000W, and the input power is 24vol 30A. When I charge 4 batteries of 6s 5000mah at the same time through the charger, does the balace mode work at its best? thanks everyone!
Sorry to sound silly and need little help. I have this Q8 smart charger and I’ve put a battery on destroy mode and it destroy’s it to like 0 but then it starts to charge the battery up again? What should the destroy mode do, what does it do to the battery like do it destroy it to 0 Volts? I’m a newbie to these chargers and the manual is rubbish. Hope someone can help. Thank you.
I have one of these new Q8 units and for some reason it refuses to discharge at higher than ~4W. It briefly jumps up to the full discharge power (for ~100ms every ~3s) before returning to ~4W
any idea of an RC charger that has power output mode with actual CV and CC output? this one you reviewed definitely cannot do CC (i wonder what that current setting is made for, then).
May I ask a question? I use lipo battery charger Q8 Isdt 1000W, and the input power is 24vol 30A. When I charge 4 batteries of 6s 5000mah at the same time through the charger, does the balace mode work at its best? thanks everyone!
![FNAF Into the Pit has A LOT of Unused Graphics | LOST BITS [TetraBitGaming]](http://i.ytimg.com/vi/6YhZCRdipl4/mqdefault.jpg)
I just discovered the power supply functions on all of my chargers and it has been really useful to test old FCs, ECSs and RXs that I thought were dead. Now i can build Franken-kwads out of resurrected parts.
Oh... I like the idea!!! 😃
just got one of these today mijne came with a screen protector and my glass is perfect i think you got a test unit lol. thanks for sharing the info also there is a firmware upgrade on this already
"Spamming chargers" 😂😂😂. So true tho.. Great review!
Try heat up the front plate with a fan.. ( hairdryer )
And then have a look, if you can fix it ..
( fix the middle button )
Pretty impressive charger, Sam! 😮
Awesome review!!!
DC power supply is super cool! Now we can charge Phantom batteries from there!
hi I had a question! condition, what is its use in this charger and why is it between 4 volts and not more for pb??? Does it show the voltage of each cell?
the icharger x8 have a more powerful power supply 30amps at 36v that can nice blow up sparks and it can also auto turn on when the charger is turn off and on
For the ISDT Q6 I've bought a Xiaomi Dashcam Glas screen protector..
It's just covering the screen..
No scratches so far, but dust inside the charger.. "under the screen"
Mine came with a screen protector. The screen looked much duller than yours however. It lacks that glossy glass look and looks more like cheap plexi.
Do you know if the new ISDT K2 Air has a self resetting fuse as well?
Thanks for a great review! perfect test :D
May I ask a question?
I use lipo battery charger Q8 Isdt 1000W, and the input power is 24vol 30A.
When I charge 4 batteries of 6s 5000mah at the same time through the charger, does the balace mode work at its best?
thanks everyone!
Does ISDT Q6 nano survive shortcircuit?
Some day you’re gonna have one heck of a fire. Be sure to get it on video. Lol
Sorry to sound silly and need little help. I have this Q8 smart charger and I’ve put a battery on destroy mode and it destroy’s it to like 0 but then it starts to charge the battery up again? What should the destroy mode do, what does it do to the battery like do it destroy it to 0 Volts? I’m a newbie to these chargers and the manual is rubbish. Hope someone can help. Thank you.
Good power supply for my ts100
I have one of these new Q8 units and for some reason it refuses to discharge at higher than ~4W. It briefly jumps up to the full discharge power (for ~100ms every ~3s) before returning to ~4W
You said "nowhere on the box says dont short terminals" where would you want to?
What is your favorite charger 🔌. ? Hota D 6 + ?
for me is icharger X8 and isdt q8 Max best chargers
Felt like watching electrobooms channel 😬
Which power supply converter are you using?
any idea of an RC charger that has power output mode with actual CV and CC output? this one you reviewed definitely cannot do CC (i wonder what that current setting is made for, then).
ToolKitRC M8S and I believe some of the other models like the M9
can i charge my car battery with this device?
If it has a lead acid setting than yes. and set it to 6 cells.
You mean 1/20V? 1:25
v0.05 +-
@@DroneMesh right not "half a volt".
@@AlexApol Yea I just noticed that
1:25 0.05 != Half a volt
Half a volt is 0.5
Whats your recommendation for just a simple feild charger ? thx
Toolkit rc m6 or m8 is the cheapest smallest DC chargers worth a shit
That looks like the most annoying system for changing options they could design. "No where did it say not to short the leads." lol
Would have been a short review if you blew it up..
Or laptops!!!
🤣🤣🤣🤣🤣
Lmao!!
Please 1 drone giveaway
May I ask a question?
I use lipo battery charger Q8 Isdt 1000W, and the input power is 24vol 30A.
When I charge 4 batteries of 6s 5000mah at the same time through the charger, does the balace mode work at its best?
thanks everyone!