Подрезаете на 1 мм шлейф, залуживаете плату и шлейф, совмещаете и припаиваете паяльником проходясь по самому кончику, припой расплавится в соединении и припаяете все основательно.
is it possible to do a bonding to both glass and pcb using only a cof cleaner,ACF tape and a hot iron like the one you use for pre assembly and ofcorse a microscope to allign the cof tab ic ??? i have not seen anyone do this, and i wounder why!! it cant be that hard, or is there a magic thing on those cof bonding machines. For sale /repair with warrenty i understand the need for a bonding machine, but it must be a way without this machine i have only found bonding to the pcb with solder. this will not work on the glass side for atleast two reasons, solder do not bond to doped glass, and it can break du to heat, ant the tabs on the glass side is incredible smaal and close. but there must be a way using the acf tape cleaner and heat with a handheld tool, the cof can be taped in posision. anyone know about this or seen this done , or know why this will not work. hoping for a reply on this topic
I guess without proper knowledge, tools and experience it is hard to reattach signal ribbons. But the hardest part would be not to break thin LCD plate. The bigger the harder.
sir, i have MI TV4 55 inch, presently my tv with no picture on screen, sound ok, i have searched for repair in youtube, some technicians showed that how to block CKV lines, we did it now the picture comes with half down picture is flickering with red color, after some time it will come with no pic sound ok , is there any solution please ? is it COF porblem T-con Board problem or Panel Board problem please help?
@@ProHackHD thanks, I tried, but seller I found offering buy in bulk, I need only one, plus 1 spare, just in case. Can you tell as well, what soldergun temperature to be applied for using bonding tape for COF to glass? And is important pressure level?
Buongiorno, smontando un tv akai 3222 smart tv, o spezzato un COF che va dalla t-con allo schermo. In Italia nessuno lo sa riparare, si puo bypassare o devo buttare la tv.Grazie
Зачем усложнять как бы у стекла менять то да без этого не как. А так к плате обычным пояльником можно припоять, если руки растут откуда надо. Было дело перепаивал один шлейф к плате начанал отклеиваться и тв потух. После перепаики заработал и без всяких артифактов.
I have a illuminated blank screen backlights work i changed all 3 boards in the back from shop jimmy still have same issue would these boards cause my problem its a 55" tcl roku 4k.. Screen lights up but no menu or picture resetting has no effect
@@shanghai2058 there are 2 boards bonded to led panel... Check them for shorts and what not.. Ive yet to take mine back apart but this is the only option left to try
im having this problem , one of my signal ribons came off when i was repairing led defusers. Anyone know where or what exact tape i would need to accomplish re-attaching it? Iv tried searching cof bonding tape but am not sure which type i need. anyone know?
Good morning, I'm from Brazil. I'm a technician. I wanted to get the tape to paste the display and where I can get the soldering iron and the display repair machine.
THIS is the solution for flickering and halved pictures on all those 4k LG and Samsung panels. Not the fucking around with tape covering a number of lines and calling if a "fix".
By the time you remove the LCD from the TV and mess with all of this, there is a 20 percent chance it will work. With all of the time it takes to take the LCD out and the risk of damage, it is just best to replace the TV. Maybe you do this if you are bored and have nothing to do, but the costs of time and materials in doing this process exceeds the cost of a new TV. I don't get why anyone would do this. The value of a used LCD TV does not support this either. Yes, it can be done, but why? TV pictures are being improved with every model year. I service TVs for a living, and besides power supplies, mainboards, t-con boards and software issues, if it is an LCD or even an LED backlight issue, it isn't worth the time and costs, one can't make any money doing this stuff. Cool that you fixed it, but why?
Please remember there are countries with people who can afford to buy a new tv. So they take the chance and try to get it fixed for 1/5 the price if it works great if it doesn’t atleast they tried. Not everybody can just get up and buy new things when things break and no everybody just try’s to do things out of boredom it’s a necessity for some. Ignorant prick
sir my TV Sony Bravia KLV 22P402B having the issue of horizontal vertical line help me i want to repair and what is the total cost for repairing and also do I repair it or go for the NEW one thank you .....
Привет!Без системы микроскопа это гуд!Я тож прикупился хочу делать так же.обычно на припой садил без микроскопа вродя видно.а вот на стекло клеить пока не вижу надо микроскопы
If you press the fingers in the COF join, then this problem can be identify.
What if no difference when you press it ?
@@ldggamer9604 I could not show the video with the finger pointing the problem.
@@ProHackHD thanks for replying
Se você pressionar os dedos no cof Join, então Thais problema pode bem identificar
Sir Sony Led lait have raha hai kya ho ga 8809934474
Hola, Tiene una linea verde vertical, después de reparado, lo pudiste sacar, o lo entraste así???
Kdl 40r550 same bos?where can I buy this ribbon??
Aliexpress
Here, let me go get my COF tape and bonding iron and step on over to my COF bonding machine...
Can you tell why is solder gun temperature when using for cof bonding?
Why they make it so hard to repair
Sir Kay aap training bhi provide karte hai?
Eres un crack 👍 saludos una pregunta la cinta a qué superficies se adhiere ? Es que mi pcb ya trae un poco de estaño aún así me funciona?
It would be best to write in English.
Bhai bonding material kahan se late ho or kitne ka aayega.
Dear Pro Hack, It's possible do this without bonding machine? Are there an other mean?
Impossible without bonding machine.
Was thinking same
nice video my friend..these devices r very expensive cos of the rate in turkey.
ruclips.net/video/DocYp2LBIro/видео.html
U can see the tutorial sir.. Using simple tools..
Hello sir please i need your help how I purchased or buy led lcd panel's please let me explain 💝🙏🏻🙏🏻
How can I help you?
Hi! What is that white tape you stick on the contact? Is that what holds the two contacts together?
In my Hamim 32 inch smart ty, suddenly we get a vertical line in display now what the solution about it?
bhi main led ka cofe lagan hai kitne paise lage gaye
Samsung ka led tv hai screen pe vertical line aaraha hai... Samjhye cof ka problem hai kitna kharch aa a ga
Thanks for the video sir about cof bonding it's a good help me sir thanks so much
So nice of you
Подрезаете на 1 мм шлейф, залуживаете плату и шлейф, совмещаете и припаиваете паяльником проходясь по самому кончику, припой расплавится в соединении и припаяете все основательно.
How much it's cost to repairs.
hi my friend, congratulations for the service, I need to learn to put the cof on the display
Is that a teflon tape used by plumbers
Sar mujhe bhi Karana hai aap kahan se ho Meri TV ka same condition Hai vah wala plastic Ud Gaya Hai
is it possible to do a bonding to both glass and pcb using only a cof cleaner,ACF tape and a hot iron like the one you use for pre assembly and ofcorse a microscope to allign the cof tab ic ??? i have not seen anyone do this, and i wounder why!! it cant be that hard, or is there a magic thing on those cof bonding machines. For sale /repair with warrenty i understand the need for a bonding machine, but it must be a way without this machine i have only found bonding to the pcb with solder. this will not work on the glass side for atleast two reasons, solder do not bond to doped glass, and it can break du to heat, ant the tabs on the glass side is incredible smaal and close. but there must be a way using the acf tape cleaner and heat with a handheld tool, the cof can be taped in posision. anyone know about this or seen this done , or know why this will not work. hoping for a reply on this topic
Enable subtitle feature in youtube settings. Please.
I will try later.
What if that glass material at the middle of the flexi cable is broken?
Perdón, me equivoque en la pregunta anterior, Muy bueno el Vídeo!!!
Bienvenida querida
Como esta .como se llama la cinta y donde la consigo si la tiene mercado libre gracias
Alwayz watching master🙏🙏🙏💯%
Thanks for the visit
I have an LCD TV and the tape's ic is burned, how can I remove this tape from the glass?
Sir I need u r help my Panasonic TV 32 inches have same vertical black line problem.... Can u solve... Please
sir mechine sikhate hai hai ?
Cant we just soldered it or some jumper??
Where do you buy the cof at. I have. Vizio 70 inch that the middle part of the cof is burn out.
I guess without proper knowledge, tools and experience it is hard to reattach signal ribbons. But the hardest part would be not to break thin LCD plate. The bigger the harder.
sir, i have MI TV4 55 inch, presently my tv with no picture on screen, sound ok, i have searched for repair in youtube, some technicians showed that how to block CKV lines, we did it now the picture comes with half down picture is flickering with red color, after some time it will come with no pic sound ok , is there any solution please ? is it COF porblem T-con Board problem or Panel Board problem please help?
Is possible to order from you couple of COFs for my tv and bonding tape for attaching cof to glass?
You can order online from Alibaba.com
@@ProHackHD thanks, I tried, but seller I found offering buy in bulk, I need only one, plus 1 spare, just in case.
Can you tell as well, what soldergun temperature to be applied for using bonding tape for COF to glass? And is important pressure level?
@@Home_made_ch Did you find out what temperature?
where can i order bonding tape sir?
Is this service available in Bangalore ?
49" kevin led tv panel is cracked, can u repair vt expsnce
J'ai besoin de cet appareil comment où peut-on acheter ?
Sony kdl 7500e sir five fixed thin black is this cof problem?
No one in Tx offers this repair 😢
How much will it cost for this type of repair?
❤
Que vídeo extraordinário, show.👏👏👏👏
o
l
o
Buongiorno, smontando un tv akai 3222 smart tv, o spezzato un COF che va dalla t-con allo schermo. In Italia nessuno lo sa riparare, si puo bypassare o devo buttare la tv.Grazie
Зачем усложнять как бы у стекла менять то да без этого не как. А так к плате обычным пояльником можно припоять, если руки растут откуда надо. Было дело перепаивал один шлейф к плате начанал отклеиваться и тв потух. После перепаики заработал и без всяких артифактов.
Excellent Bro. Knowledge Ka Khazana.
Como se chama essa fita cola e onde podemos adquirir
Hi, is it possible to paste the flat cable into the glass of the display that broke with short? Do you have any video taught? Please help me.
I have a illuminated blank screen backlights work i changed all 3 boards in the back from shop jimmy still have same issue would these boards cause my problem its a 55" tcl roku 4k.. Screen lights up but no menu or picture resetting has no effect
Same problem. I replaced 3 boards and problem is the same. It has to be this lcd panel. But i have no tools to fix it
@@shanghai2058 there are 2 boards bonded to led panel... Check them for shorts and what not.. Ive yet to take mine back apart but this is the only option left to try
@@bradleymayer5120 i dont know anythimg about electronics. Mine is a sony bravia kdl-48w605b. Tnx anyway
@@shanghai2058 its easy.. I taught myself and youtube can help dont give up electronics are pretty fun
Bro can you please put the link to buy cof bonding tape
What tape you use?
Sir mere led tv ka cof cut gaya hai please koi tarika bataye
Very good video
Thanks for the visit
im having this problem , one of my signal ribons came off when i was repairing led defusers. Anyone know where or what exact tape i would need to accomplish re-attaching it? Iv tried searching cof bonding tape but am not sure which type i need. anyone know?
There some trick to repair no row tab lcd panels?
great to see this videos, good sharing
Nice project master
Thanks dear
Am having three 32 and two 42 screen,tied accidentally and I have no way to rejoin
Amigo a mi se me despego esa cinta como hago para arreglar
awesome nice educational video sir
Thank you so much
Sir cofe ke niche koin si tep lagate hai. Please naam bataiye. Kiya chij hai.
Acf Bonding Tape.
Kaha par miljaye yah tape.
Ada jual x cof bonding tape
Cómo consigo esa cinta para pegar los cop
Thank you
Very nice sir je
Best of luck dear.....
Good morning, I'm from Brazil. I'm a technician. I wanted to get the tape to paste the display and where I can get the soldering iron and the display repair machine.
Boa noite, onde fica está oficina
Pls help COF bonding iron and ACF TAPE not available in India.. please help for purchase
What's the brand of the panel? Can we stitch together of 2 panels to make open frame wide seamless display?
Bonjour à vous mais comment faire pour pouvoir disposer de cette machine
bro, if you please send me the COF bonding tape link or Aliexpress link or photo of the tape name ?
Ada jual x tab bonding iron
sorry if the picture is full vertical stripes all the screen how
donde esta tu taller
hello como se llama esa cinta que pegan
Bonding tape
Meron po kya dito nueva ecija na ganyan textback po at kung saan po location nya po sir
THIS is the solution for flickering and halved pictures on all those 4k LG and Samsung panels. Not the fucking around with tape covering a number of lines and
calling if a "fix".
By the time you remove the LCD from the TV and mess with all of this, there is a 20 percent chance it will work. With all of the time it takes to take the LCD out and the risk of damage, it is just best to replace the TV. Maybe you do this if you are bored and have nothing to do, but the costs of time and materials in doing this process exceeds the cost of a new TV. I don't get why anyone would do this. The value of a used LCD TV does not support this either. Yes, it can be done, but why? TV pictures are being improved with every model year. I service TVs for a living, and besides power supplies, mainboards, t-con boards and software issues, if it is an LCD or even an LED backlight issue, it isn't worth the time and costs, one can't make any money doing this stuff. Cool that you fixed it, but why?
Please remember there are countries with people who can afford to buy a new tv. So they take the chance and try to get it fixed for 1/5 the price if it works great if it doesn’t atleast they tried. Not everybody can just get up and buy new things when things break and no everybody just try’s to do things out of boredom it’s a necessity for some. Ignorant prick
Awesome video for technical learners
Best wishes for you.
আমার ২ টা ৩২ ইঞ্চি প্যানেলের সমস্যা রেবন সাইড থেকে উঠে গেছে এটা কি রিপেয়ার করা সম্ভব?
সম্ভব
hello friend would be kind enough to give me information about that tape that you use to paste that coff chip please
si puo' bypassare un flat spezzato che dalla t-con va allo schermo
doesn't the tape insulate the connections or am i missing something ?.
some tech do not give you important infothey leave you half way
how to sepparate the display glasses (2 glasses) to chage a flat cable damaged? help me...
Hey man, can you help me fix my monitor?
What?
I suspect I can't do it at home.
I need cups for my Sony led kd 55x7000E
Reply plzzz. Which country from u r?
Donde conpro el tape y la punta?
How many paid for solve this problem in 32 inch lcd
sir my TV Sony Bravia KLV 22P402B having the issue of horizontal vertical line help me i want to repair and what is the total cost for repairing and also do I repair it or go for the NEW one
thank you .....
Sony 37p3600 inverterboard inverter board bypass ccfl problem inverter pcb faulty, we want to cancel it from power card
Sir mera penal kharab ho gya hai kaise repair hoga
led net is many diod connected in serie use ohmmeter check cool and voll meter hotcheck
BUENO me comprare esa maquina para reparar mi tv ,,cuanto Cuesta?
1000 thank you 🙏🏼 😊😉👍🏼👍🏼👍🏼👍🏼👌🏼👌🏼👌🏼👏🏼👏🏼👏🏼🙋🏼♂️ good 💯 % best perfect
Que es lo que utiliza para pegar ????
Impressionante! bro...Excelente trabalho bro!
Obrigado.
Pl send 32" sansui led tv,low raster,no picture,.....32hb23caf model
how can i contact you ?
There is a link to the Facebook page in the RUclips channel description.
Привет!Без системы микроскопа это гуд!Я тож прикупился хочу делать так же.обычно на припой садил без микроскопа вродя видно.а вот на стекло клеить пока не вижу надо микроскопы
Write in english please.