I have a Milwaukee power plus 18V that has the same motor so I was able to see how you replaced the brushes. I'm not going to remove the rotor so I won't struggle with the press-fit gear. I do have to find the brushes though. Thanks for posting.
You definitely need a pair of snap ring pliers my friend! Watching you pry that big circlip out was like hearing nails on a chalkboard. Also, I would get a good 6” (150 mm) vise - much better for pressing those small gears onto the motor shaft.
Acho que ele quis aproveitar pra revisar e lubrificar a máquina inteira! O rapaz é muito dedicado no trabalho e fez com excelência. Parabéns por mostrar com detalhes seu trabalho aos brasileiros 👏🏻👏🏻👏🏻
Así es... Su comentario refleja su sabiduría... A punto estuve de seguir lo mismo del vídeo pero opté por cambiar el motor por uno de la misma marca. El motor antiguo al ser abierto mostró signo de desgaste en colectores y bujes...
Большое спасибо за подробный обзор по замене щёток, разборки и смазки редуктора данной модели шуруповерта. У меня такой же шуруповёрт служит с 2011 года и тоже пора ему́ сделать профилактику.
excellent work - I Wanted to know the brand and type of grease used in this? Some observations: (1) the LED wire which you inserted was wrongly done, should have been under the clockwise/anticlockwise switch not over it. check 1:57 timeline. (2) using a rubber mallet or plastic head soft hammer to insert the bearing from the armature would be ideal, and best practice with bearing puller would be ideal. (3) the primary armature shank when inserted in gear box was not greased, even though the gear housing was perfectly greased. best practice would be to apply coating over the armature shank before engaging it with the gear box. This when done ensures proper lubrication overall. if not done this shank will pull grease towards it and make the gear housing gears dry of required grease.
Thanks for your comments. My tool : Walkera Motor Pinion Gear Puller Removal : sea.banggood.com/Walkera-Motor-Pinion-Gear-Puller-Remover-for-RC-Helicopter-Motor-p-909407.html?CreativeChannel&May&cur_warehouse=CN XIAOMI Mijia 24 in 1 Multi-purpose : sea.banggood.com/XIAOMI-Mijia-24-in-1-Multi-purpose-Precision-Screwdriver-Set-Aluminium-S2-Steel-Repair-Tools-p-1187158.html?rmmds=search&cur_warehouse=CN
Hello! I have now the same problem! I re-assembled everything almost the way you did! Especially the motor. I checked it with 12V before reassembly. But.... after the reassembly the motor smokes again. So here is the question: WHAT EXACTLY WAS THE REAL PROBLEM WITH YOUR DEVICE? I just cannot believe this was about debries and old greese.
I disassembled AGAIN, cleaned the collector and the brushes again and let motor run on external power for 1 hour withour the gearbox. First it run real slow, but then suddenly rivved up. I guess the collector finally run in along with the brushes. Now working fine.Thank you for the inspiration!
Great video. Thank you. I detected that only the carbon brushes are completely used up. Do I really have to buy a new a new engine? Is it possible to order somewhere just the carbon brushes or the ring with the carbon brushes?
Fantastic tutorial! Do you have any tutorial for a Bosch DDS181A 18volt with a loose chuck? The whole chuck wobbles all the way back to the clutch setting, is it bearings or something else, sure could use a how to.
I did not restore the motor on mine. Just put 1-2 droplets of engine oil on the left and right 'bearing' bushings (for the right one you need to remove the transmission) Put 2 droplets and spin at low speed with the motor vertical - don't touch metal with your hand, use glove. No more smell or big flames.
Saludos tengo motor 12vcd bosch que arranca 180° se detiene unos segundos y vuelve arrancar 180° y asi se repite una y otra vez yo le cambie Carbones porta carbone mas rotor todo nuevo y continua la falla que podria ser podrias Orientarme por favor?
Hi I’m trying to follow along but the motor won’t come apart. It looks effortless in every other video like this where it just falls apart when taken away from the housing. Any idea what I’m doing wrong?
Great stuff. I was searching for something for my worx handsaw which is also smoking like crazy. Cleaned the comutator, checked the stator and the armature and all is good! Sanded the brushes to get them even and its still smoking! The brushes are long enough and the rotor moves freely. I am out of ideas. The only thing left i could do is to replace the brushes. Any other ideas?
Hi there great video on the restoration of the drill. I actually bought one and it worked great for an year and suddenly started smoking. I am not a heavy user. Just used it drill holes in walls to hang paintings, to fix up some wooden chairs and hanging up doors. I am tech savy but, haven't ever fixed a drill before. My Questions are: 1.) Would you recommend someone new to get a sodering iron and the items you show in the video and start opening up the motor? 2.) Should I take it to Bosch's service center and try to get it fixed there ? And if there are any scams I should be aware about do let me know. 3.) What is the cost of repair at a service center generally? 4.) Does anykind of Grease work on the parts or do you need special grease only which I read in the other comments? And what do you use here 19:43 ? Thank you. I just saw you do alot of repair on everything I will try to do some my self someday =).
Hello, first of all thanks for your video ! I'm wondering what's the tool you use for taking out the little gear at the top of the motor axis (video time : 15''). It looks very useful... THX again
13:29 DO NOT do that! You can pull the gear easily with flame torch gas powered. 20$ at local repair parts store. Heat it up and simply pull it with pliars. Takes 20seconds. Both my Bosch 12-15V started smoking to hell and had to repair them thoroughly.
Thanks for sharing, I was drilling a wall with the gsb 1200 li, in hammer mode and the things went wrong , it seems that is a gear box issue, but I think this tool has 2 year guarantee and I hope they could help me
I bought from here : shopee.vn/product/74799240/6841289558, you can seach at aliexpress like this : aliexpress.com/item/4001222673497.html?spm=a2g0o.productlist.0.0.46a47feaeH3bDs&algo_pvid=c46f985e-3eff-4c1f-81cd-81ecb3122744&algo_expid=c46f985e-3eff-4c1f-81cd-81ecb3122744-15&btsid=0bb0624216039839025575168ee54e&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
Самое лучшее видео по сборке разборке bosch gsb10v. Best of the best
Amazing video with the way tools they used and proper servicing step by step.Excellent workmanship.Thanks for guide us..
işini hakıile yaptın dürüst insan bu kadar şerefli olur seni tebrik ederim dürüst insan
តើមានលក់ទេបងប្រភេទថ្មរបែបហ្នឹង
I have a Milwaukee power plus 18V that has the same motor so I was able to see how you replaced the brushes. I'm not going to remove the rotor so I won't struggle with the press-fit gear. I do have to find the brushes though. Thanks for posting.
WOW. What an great tutorial. Thanks for sharing all steps. Now I'm ready to try to fix my old B+D drill motor. Greetings from Paraguay.
Un millón de gracias. Me ayudó muchísimo.
و الله كان يدخن من سويت نفس طريقته ضبط صار أوكيه شكرا كنت بشتري مطور❤❤❤❤
Excelente video
عندي نفس العطب كنت أنوي رميها لكن بعد مشاهدة الفيديو أعجبت بها
Congratulations, excellent video, the best I've ever seen.
Hello, what type of carbon brush did u use here? Will it be compatible if i use the carbon brush for gsb 180 li for this gsb 120 li?
I did not know you can get the gear off the motor like that. Thank you
You definitely need a pair of snap ring pliers my friend! Watching you pry that big circlip out was like hearing nails on a chalkboard. Also, I would get a good 6” (150 mm) vise - much better for pressing those small gears onto the motor shaft.
Thanks for the tip
Finally someone said how important circlip pliers are lol
Thay hết 2 lần motor, 150k/c 😅 cái đầu xài lâu lắm, thay motor hãng bosch luôn mà mau hư, đã thay đến cái thứ 2 😢
Turkiye 'den selamlar...
Çok yararlı bir çekim yaptigininiz için sizi kutlarim...Matkabimin bakımı'nı düşünüyordum benim ıçin mükemmel faydalı oldu...
Hi, Great Video!!!!
One question, where I can buy these carbon brushes online?
Thanks
Hello did you manage to find out where to buy them from
@@aziztabbara6688 check those comments below and you will see the link to buy it.
What the size of the connection chuck sir.? 3/8 or 1/2 ...i want to replace my chuck since it no longer grip well after years of use
great job . with all the steps and details . thank you .
Where did you find those graphite pieces? trying to find them in bosch page but, imposible.
You just need to change carbon brush to fix this problem
Acho que ele quis aproveitar pra revisar e lubrificar a máquina inteira!
O rapaz é muito dedicado no trabalho e fez com excelência.
Parabéns por mostrar com detalhes seu trabalho aos brasileiros 👏🏻👏🏻👏🏻
He did complete service. Instead of just carbon brushes.
Amazing job
Understood, then he should change the topic of this youtube video to full service.
Así es... Su comentario refleja su sabiduría... A punto estuve de seguir lo mismo del vídeo pero opté por cambiar el motor por uno de la misma marca. El motor antiguo al ser abierto mostró signo de desgaste en colectores y bujes...
Большое спасибо за подробный обзор по замене щёток, разборки и смазки редуктора данной модели шуруповерта. У меня такой же шуруповёрт служит с 2011 года и тоже пора ему́ сделать профилактику.
Здравствуйте, подскажите пожалуйста как эти щетки называются, как и где их найти (может артикул), заранее спасибо
excellent work - I Wanted to know the brand and type of grease used in this?
Some observations: (1) the LED wire which you inserted was wrongly done, should have been under the clockwise/anticlockwise switch not over it. check 1:57 timeline. (2) using a rubber mallet or plastic head soft hammer to insert the bearing from the armature would be ideal, and best practice with bearing puller would be ideal. (3) the primary armature shank when inserted in gear box was not greased, even though the gear housing was perfectly greased. best practice would be to apply coating over the armature shank before engaging it with the gear box. This when done ensures proper lubrication overall. if not done this shank will pull grease towards it and make the gear housing gears dry of required grease.
Thanks for your comments. My tool :
Walkera Motor Pinion Gear Puller Removal : sea.banggood.com/Walkera-Motor-Pinion-Gear-Puller-Remover-for-RC-Helicopter-Motor-p-909407.html?CreativeChannel&May&cur_warehouse=CN
XIAOMI Mijia 24 in 1 Multi-purpose : sea.banggood.com/XIAOMI-Mijia-24-in-1-Multi-purpose-Precision-Screwdriver-Set-Aluminium-S2-Steel-Repair-Tools-p-1187158.html?rmmds=search&cur_warehouse=CN
@@Mr_Old thanks but which grease did you use. brand and type
@@kashi2843 Johnsen's Disc Brake Wheel Bearing - Heavy Duty Hi Temp Lithium #2 Grease
Hello! I have now the same problem! I re-assembled everything almost the way you did! Especially the motor. I checked it with 12V before reassembly. But.... after the reassembly the motor smokes again. So here is the question: WHAT EXACTLY WAS THE REAL PROBLEM WITH YOUR DEVICE? I just cannot believe this was about debries and old greese.
I disassembled AGAIN, cleaned the collector and the brushes again and let motor run on external power for 1 hour withour the gearbox. First it run real slow, but then suddenly rivved up. I guess the collector finally run in along with the brushes. Now working fine.Thank you for the inspiration!
Awesome work, great attention to detail, thanks for posting!!
How do i find the brushes on this kind of drill i have the same one but i need to replace the brushes thanks
Thanks for sharing this. Appreciate your time and hard work. Helped me restore and fixed my 5 year old Bosch 18V model.
mở ra, ráp vào cho đã còn dư con ốc vít.kaka
Hi know im late on this one but is there a way that u can remove the the brush holders say maybe if the broken
Aqui no Brasil adquirir uma destas maquina Bosch,maravilhosa forte resistente, vale a pena adquirir.
Good work , but no need to remove the motor main gear ⚙️
🙏🚩👌
Please help, where I can get this part 17:34 ?
Where can we get the Carbon Brushes? Local Bosch center in India said I would need to buy another motor
Excelente trabajo.y.muy buen video.gracias por compartir.acabo de hacer la misma operación en un taladro.y me ha quedado muy bien.un saludo
0:22 Hello,
Are those flashes normal when motor stops ?
I have a GSR 120 LI and it makes same motor flashes without smoke.
Thanks
Hi, flashes when motot stops without smoke is normal
Gracias por el vídeo
Cordless dril ka on off switch kaham milenge
Exelente video muy practico, el suiche tiene arreglo no le pasa corriente que le puedo hacer te lo agradezco de antemano gracias
Thanks, for this video ❤
Great video. Thank you. I detected that only the carbon brushes are completely used up. Do I really have to buy a new a new engine? Is it possible to order somewhere just the carbon brushes or the ring with the carbon brushes?
Ah. I saw. As the engine is really cheap it will be no problem to replace the engine in total
Fantastic tutorial! Do you have any tutorial for a Bosch DDS181A 18volt with a loose chuck? The whole chuck wobbles all the way back to the clutch setting, is it bearings or something else, sure could use a how to.
what is the bit name required to open the drill pls tell
thanks for sharing great video tutorial
I did not restore the motor on mine. Just put 1-2 droplets of engine oil on the left and right 'bearing' bushings (for the right one you need to remove the transmission) Put 2 droplets and spin at low speed with the motor vertical - don't touch metal with your hand, use glove. No more smell or big flames.
Saludos tengo motor 12vcd bosch que arranca 180° se detiene unos segundos y vuelve arrancar 180° y asi se repite una y otra vez yo le cambie Carbones porta carbone mas rotor todo nuevo y continua la falla que podria ser podrias Orientarme por favor?
Eccellente riparazione
Most machines work of the same principle with slight adjustments. Update for the newer model please and fantastic upload.
Very good information 👍
Hi I’m trying to follow along but the motor won’t come apart. It looks effortless in every other video like this where it just falls apart when taken away from the housing. Any idea what I’m doing wrong?
Muito bacana, mais didático impossível. Muito agradecido, resolvi meu problema. Grato!
Where can I find buy brushes
Great stuff. I was searching for something for my worx handsaw which is also smoking like crazy. Cleaned the comutator, checked the stator and the armature and all is good! Sanded the brushes to get them even and its still smoking! The brushes are long enough and the rotor moves freely. I am out of ideas. The only thing left i could do is to replace the brushes. Any other ideas?
Troque o motor completo que não é caro
what is the seriel number of carbon brush and where can i buy it? tq
Yes, please let us know..
Hi there great video on the restoration of the drill.
I actually bought one and it worked great for an year and suddenly started smoking. I am not a heavy user. Just used it drill holes in walls to hang paintings, to fix up some wooden chairs and hanging up doors.
I am tech savy but, haven't ever fixed a drill before. My Questions are:
1.) Would you recommend someone new to get a sodering iron and the items you show in the video and start opening up the motor?
2.) Should I take it to Bosch's service center and try to get it fixed there ? And if there are any scams I should be aware about do let me know.
3.) What is the cost of repair at a service center generally?
4.) Does anykind of Grease work on the parts or do you need special grease only which I read in the other comments? And what do you use here 19:43 ?
Thank you. I just saw you do alot of repair on everything I will try to do some my self someday =).
did you finally repair your screwdriver ?
@@radmau Nope not yet. Just couldn't find the time to. Will be trying to clean it up myself today.
@@radmau Well tried it and it's still smoking and working slow. I just hit it with a WD 40 and a paint brush.
Thanks for sharing , I found that my not only come out smoke . it rotate slow aswell . is that just cleaning can fix ?
Not that I know of
most likely carbon brush is run out already. Need to replace that
@@mnx5679 yes. carbon brush run out..
como se llama la pinza que usa?
Thanks mr old....
Hi nice video!what kind of greese are you using?thanks in advance!
Sabe me dizer os códigos dos transitores tip q vão no decipador da bosch GSR10,8v li ?
Hello, first of all thanks for your video ! I'm wondering what's the tool you use for taking out the little gear at the top of the motor axis (video time : 15''). It looks very useful... THX again
Как найти зарядчик
Buen trabajo.Felicidades
I was wonder what liquid was he using to clean the gears? Is it Soap Water?
الفحمات كيف حصلت عليها
Which torx bit size did you use to remove the screws from the casing?
T 10 in my case - Bosch GSR 120 Li. Very likely that the screws are the same.
My gsr 12v-15 screwdriver casing screws are T9
11:54 You didn't fully explain the important part. Assembling the gearbox cover is very difficult.
I took hours until i found how to assembling
@@KnightofArab Yes, it's really hard.
Good! Cheers
13:29
DO NOT do that!
You can pull the gear easily with flame torch gas powered. 20$ at local repair parts store. Heat it up and simply pull it with pliars. Takes 20seconds.
Both my Bosch 12-15V started smoking to hell and had to repair them thoroughly.
Thanks for sharing, I was drilling a wall with the gsb 1200 li, in hammer mode and the things went wrong , it seems that is a gear box issue, but I think this tool has 2 year guarantee and I hope they could help me
Is the spindle at the end of the motor that has the gear cog on it tapered so that it holds the cog harder the further you push it down the shaft?
Hello Where can I buy the part (coal) that you changed the device
Podrías haber dar como información,que el tornillo interno del mandril ,se desenroscar a la izquierda,el resto bien
Hi...where do you buy tool like 14:40 and what name of that tool.Very interested.
here : sea.banggood.com/Walkera-Motor-Pinion-Gear-Puller-Remover-for-RC-Helicopter-Motor-p-909407.html?CreativeChannel&May&cur_warehouse=CN
Can u give us links to buy that small carbon in that motor?
I bought from here : shopee.vn/product/74799240/6841289558, you can seach at aliexpress like this : aliexpress.com/item/4001222673497.html?spm=a2g0o.productlist.0.0.46a47feaeH3bDs&algo_pvid=c46f985e-3eff-4c1f-81cd-81ecb3122744&algo_expid=c46f985e-3eff-4c1f-81cd-81ecb3122744-15&btsid=0bb0624216039839025575168ee54e&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
Salam Abdul Halim, just buy a new motor from shopee. This motor fit nicely.
shopee.com.my/product/130462153/4733307773?smtt=0.83410965-1605090528.9
@@mohamadsazaliisyfaq5459 bare unit is only RM170
@@Mr_Old thanks
Does anyone know which tool is used here: 14:41
here : sea.banggood.com/Walkera-Motor-Pinion-Gear-Puller-Remover-for-RC-Helicopter-Motor-p-909407.html?CreativeChannel&May&cur_warehouse=CN
How to buy carbon with Cooper.. bcz my copper broken
eBay - v cheap & available - but ships from China ----- if you still looking to repair after 2years😂
Usually such motors are relatively low cost making "swapout" the preferred method of repair. You don't say here what the motor replacement cost is?
In Malaysia it's the equivalent of 15USD
If you heat up the shaft/rotor the rotor comes off you can pull the rotor off easier. No need to hit it with a hammer ...
great
Pembelian carbon di mana?
Merci booucaux
Cómo se llaman las puntas para desatornillar?
La sierra circular puede ser peligroso
thank you
Teşekkür ederim 🙏
Lazy method: Buy new motor. Assemble. Done.
Even lazier, buy a new one, unbox it. Done.
can't you just changed the fried motor?
Thought you just needed a new motor?
Cara membuka depan nya
Он это в школе делает?💁🏻♂️
💪
Legal.
멋지다
lol
👍👏👏👏👏
komutator czyści się pomyksem nie papierem ściernym.
im buying new one :)
😅
Esse mecânico é uma mulher, não vale...
Useless dont show how he assemble the head to be lock
Aminha molho não quer fucina