The change the TCR needed shock position, as you show last model the shock are point to the ground, the accumulated dust make the shock jam, with the new position that can be reduce and have more distance travel
At 4:37 when you're testing the suspension, mine isn't gliding smoothly like that so it's super stiff. Any idea what i might've done wrong because it's bugging me since it makes the suspension springs essentially useless
I've found the knuckles to be extremely under designed. I've had slight touches and the ball stud breaks out of the knuckle. Once Aluminum knuckles are available I'll try again, until then, unreliable design.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
The change the TCR needed shock position, as you show last model the shock are point to the ground, the accumulated dust make the shock jam, with the new position that can be reduce and have more distance travel
Can this M series frame be used for drifting? If possible what parts are needed?
I'm not sure... may be possible but I recommend use chassis made for drift.
@@gilded_funs Thank you for your opinion
I also want to ask one more thing. Does this car have three wheelbase options?
@@thomastse1373 Included lower deck, 210 and 225mm possible.
With option, longer deck, 233, 239, 245 possible. :-)
@@gilded_funs You're welcome, thank you
At 4:37 when you're testing the suspension, mine isn't gliding smoothly like that so it's super stiff. Any idea what i might've done wrong because it's bugging me since it makes the suspension springs essentially useless
How do you connect the controller
What controller? steering servo or ESC?
What motor can i use
540 size motors for 1:10 touring cars.
@@gilded_funs ok thank you
540 is the standard number, but 3650 and no more 3652 like hobbywing, 550 don't fit
That Chaplin music 🎼 😂
Not street able. By any means. Chassis flops around
Go with ff01 Tamiya
I wonder if running a couple longitudinal braces to each bulkhead support would help?
I've found the knuckles to be extremely under designed. I've had slight touches and the ball stud breaks out of the knuckle. Once Aluminum knuckles are available I'll try again, until then, unreliable design.
Just ordered mst fwd car for 60 bucks new
Woah ... Such a basic chassis