*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*
Making use of the ruclips.net/user/postUgkxcJ22tnHH9l1vjdIdEIG27iOG55P7LXI8 reconditioning plan, I just saved 2 auto batteries from being completely junked. The guides were very simple to follow. I wish I would have found this years ago! You may use the guide to recondition any battery type
4 года назад+22
Sorry for my English, I used the google translator. It was because of your videos that I got two screwdrivers from my father-in-law. He throws them in the trash. I took it for myself, it's two Black and Decker, and fixed it. Both were without batteries, only the battery housing but without NiCd cells. I bought BMS cards and built them with lithium cells that I recovered from notebook batteries. It was cool, works super well. Thanks for your videos. See you!
Damn those new brushless upstarts. They will take over before you know it and nothing will be the same again! :) Good job gear show on making the new battery and refreshing the drill.
Excellent!! Would recommend using 303 Aerospace Protectant instead of spray wax, the stuff is absolute magic on plastics and rubber. Great video gear show!
Those high capacity lithium cells are really not suitable for this application. You are probably drawing too much current from them when the driver is heavily loaded. My suggestion is to use higher amp cells for this application. Nice video though!
I noticed that the board split when you inserted the screws. If you would try spinning them in reverse for a few secs, then drive them in, you would have fewer splitting problems.
Isn't 20A BMS is too small for a high load tool? I've seen Bosch 12V drills get choked on a dry start with 20A BMS. (edit) - that being said - I love your work, it's awesome and your videos are the best!
Michał Ziomek yes you are right 20a is small for drill you need more , i think the best way is make external cell charger with bms protection and regulator or 40a bms
Also the batteries used in the video can't really deliver 20A without getting crazy hot and possibly damaged in the process. Could even be dangerous. Those high capacity cells have high internal resistance and can only safely deliver maybe 3-5 amps.
The one he uses is $175 on Amazon. I have seen them new for around $100. Used prices are half that. You can also build a cheap diy version, just look it up on RUclips. *Look up cheap battery spot welder" on youtube. There is one for $25 that has good reviews.
Hi there....very nice to see what you are doing, very detailed. A few questions: what is the alternative for the machine at the 3:12 mark? Where do you order the plates and the stickers that you put on the batteries? All the best.
Another great video. Minute 0:35, I loved that tool, bits too and the lithium battery charger on the minute 1:20, please tell me where to get them, if you have the link, please share it with me 🙏.
Excelente video . Me encantaría q seas más específico en como conectar el módulo .TENGO un atornillador12v inalámbrico y sus baterías no dan más , les puse 6 de litio y querria saber como conectar el módulo paso a paso. Muchas gracias . Soy Rafa de Argentina
May I know the tips to choose battery for drill as battery come with different discharge rating..so which is the minimum? Thanks so much in advance 🥺🥺🥺🥺
This video is sponsored by Arm and Hammer baking soda & Acme Screws!
4 года назад
How much roughly in cost is it for you to rebuild and convert a battery pack like this? Also whats that awesome soldering machine called that you use to weld the battery connectors? Im new and still learning so i apologize if these are stupid questions.
How does the baking soda work on cleaning the plastic with hot water? Never seen that before but from watching a couple of your videos it seems to work well. Why this instead of any other cleaner?
Looked like it was baking soda, hot water and then powdered detergent. Baking soda is typically used for removing odors but it is also added to different products to help boost cleaning properties. Works great in laundry. If you can find "borax" it great on its own.
I ove these videos! :) I also upgraded some of my old tools with lithium batteries... but... but... where the hell do you get those "battery pack building" stickers and metal pieces?!?
Hi as wonderful as your videos are one catch you need to brush up please make the BMS connection clear and visible to understand you usual do that in a jiffy
this project costs MORE than a brand NEW lithium drill. those batteries are expensive. worst of all, many of these batteries are fakes, especially from amazon and ebay. not worth it.
4 года назад+2
I must of missed the part where he says to make sure to buy all your batteries from ebay and that this is a cost effective way of reviving dead battery packs. What do you like to do for fun? Because i can tell you its probably not worth it either yet you still do it, atleast this guy is saving these tools from going into landfills and providing educational content.
If you slow-start the tool it may run, but basically this 20A bms cuts off the current too early. Try 35A or 40A - depending on what you can get access to.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*
Making use of the ruclips.net/user/postUgkxcJ22tnHH9l1vjdIdEIG27iOG55P7LXI8 reconditioning plan, I just saved 2 auto batteries from being completely junked. The guides were very simple to follow. I wish I would have found this years ago! You may use the guide to recondition any battery type
Sorry for my English, I used the google translator. It was because of your videos that I got two screwdrivers from my father-in-law. He throws them in the trash. I took it for myself, it's two Black and Decker, and fixed it. Both were without batteries, only the battery housing but without NiCd cells. I bought BMS cards and built them with lithium cells that I recovered from notebook batteries. It was cool, works super well. Thanks for your videos. See you!
قلاغبب٢
ب٦٦٤٤قيق٣ثفلقثصصبلف٣قز٢
I just bought a National 12v drill with two (dead) batteries and case for 500¥. You have inspired me to look in the resale shop for junk tools, haha.
Tam profesyonel matkap ve aynı profesyonel işçilik.Tek kelime harika diyebiliyoruz.Tebrik etmeyi unutmuyoruz.Güzel ilgiyle izledik.Teşekkür ediyoruz.
Damn those new brushless upstarts. They will take over before you know it and nothing will be the same again! :)
Good job gear show on making the new battery and refreshing the drill.
Thank you!
sghr220 brushless upstarts?
Love this video! so satisfying to watch how the old power tools can be powerful again to use.
Glad you enjoyed it! Thank you!
Gotcha! 10:32 - you've assembled the drill with no strap, and 10:55 - the strap appears on its place!
Yes, at 10:32 I forgot the strap.
Great job. I really liked how You fix this Batteries and converted to lithium but here they will cost to much money
Hi, try to pre-solder the wires before soldering on the pads. It will be easier and the result more clean and nice
Good idea, thank for the tips!
That's called "tinning"
lol I was about to write exact same comment.
@@gear_show Y si usa flux aún mejor resultado.
Tôi mua một cái
Great one. Cannot buy those batteries in Canada and never saw a spot welder like that one.
Very nicely done.
I bought them from China. Anyway thank you!
They look like an 18650 battery. You should be able to get them easily through electronic stores, or vaping stores.
You're so meticulous and precise
Oh, thank you!
All attention, you are really a perfectionist.
I can really learn a lot from you.
Wow, thank you
Hi.its great job.many thanks for sharing.
That upgrade made it more powerful
Yes :)
Great job on refreshing and modernizing this impact driver!
hm, i think taking it apart was quite pointless.. it looked nice and worked too...
Excellent!! Would recommend using 303 Aerospace Protectant instead of spray wax, the stuff is absolute magic on plastics and rubber. Great video gear show!
Great point, Thanks for the info! 303 Aerospace Protectant.
Все просто: All too easy, ThankYOU
Amazing work Done 👌
Thumbs up 👍
👏 👏
Thank you so much 😀
Excellent work👍👍👍 . Thanks for sharing
Thank you too!
Maintenance is key to keeping a tool working.
Excellent work, but your soldering work needs a bit more work. Other than that, solid build. 10/10
Thanks for the tip
@@gear_show ффф
His soldering is Excellent for the purpose intended. Show us if yours is better.
As a sigda steep restoration I'm adoring this channel
Thank you!
Samsung 25r 18650 would be a great for this application, one of the best 18650's on the market
i31rke
i31rke?
FART
Cool restoration. Please no music.
That time I forgot turn mix on.
AWESOME VIDEO....AWESOME RESTORATION
I'm glad you enjoyed it
love your vidoes keep up the good work
Good work, perfect restoration, I really appreciated your hard work.
Those high capacity lithium cells are really not suitable for this application. You are probably drawing too much current from them when the driver is heavily loaded. My suggestion is to use higher amp cells for this application. Nice video though!
Great point! thank you for sharing!
Impressive upgrade. Really enjoy watching yr videos 👍👍👍
Glad you like them!
I noticed that the board split when you inserted the screws. If you would try spinning them in reverse for a few secs, then drive them in, you would have fewer splitting problems.
I've probably watched 40 of his videos and this is the only cracked board I have seen.
Isn't 20A BMS is too small for a high load tool? I've seen Bosch 12V drills get choked on a dry start with 20A BMS.
(edit) - that being said - I love your work, it's awesome and your videos are the best!
First I think like you, I think it is too small. I try to make it for testing, but finally this BMS 20A can run the motor. Anyway thank you!
Michał Ziomek yes you are right 20a is small for drill you need more , i think the best way is make external cell charger with bms protection and regulator or 40a bms
Also the batteries used in the video can't really deliver 20A without getting crazy hot and possibly damaged in the process. Could even be dangerous. Those high capacity cells have high internal resistance and can only safely deliver maybe 3-5 amps.
@@mcg6762 hye may i know what is the minimum discharge rate battery to be used as replacement? Thanks in advance 😍
This was an awesome video , very interesting & informative like to see more of it
Glad you enjoyed it, I will do another different type of cordless power tools.
You modified the battery charger. or does it work with the same system as the previous ones? excellent work
nice efforts and learning video
Very professional job!!!
Thank you!
Happy Cambodian New Year my man.
Happy Cambodian New Year! I am surprise with your comment.
Super pregledno, hvala.
I have recently joined your channel i love what you do :-) wish i could afford a spot welder like that to put battery's together
The one he uses is $175 on Amazon. I have seen them new for around $100. Used prices are half that. You can also build a cheap diy version, just look it up on RUclips.
*Look up cheap battery spot welder" on youtube. There is one for $25 that has good reviews.
@@yadaroni thanks
What do you do with all of this tools after you fix them ?
Sell and make profit
Probably
i like your work
close 3s2p, please paste into 2 rows of 3s1p
Then stick the 2 rows together will fit the 3s40A circuit ^ _ ^
Hi there....very nice to see what you are doing, very detailed. A few questions: what is the alternative for the machine at the 3:12 mark? Where do you order the plates and the stickers that you put on the batteries? All the best.
Thank you, the alternative button is for soldering mode. I bought those items from China via Taobao.
Youre simpley the Best :))
Whats thad awesome Bit btw.
Thank you!
Bom demais serviço proficional de quem ama ferramentas
✨Awesome Craftsmanship✨
Thank you!
You have restored so many tools.
Curious; What do you do with all of them?
Sell?
Give away?
Donate?
Keep?
I sold this one. I keep some tools, and I gave some tools to my brother.
Hello nice video, can u do a detailed explanation on the bms circuit wires and where each wire should go
Hey you can search in google like that "BMS 3s2p battery diagram" you will get easy.
Thanks for the video. Excellent, as always.
Why do you need so many impact drivers and drill's?!)))
I think he is selling these
@@Nixtutru, in the comments he wrote that he kept the drills for himself.
National Japanese trusted brands..it screws faster than Makita..😅👍🇲🇾
Isn't soldering this close to batteries kind of a bad idea? Heat is generally bad for those.
Another great video. Minute 0:35, I loved that tool, bits too and the lithium battery charger on the minute 1:20, please tell me where to get them, if you have the link, please share it with me 🙏.
They are based in japan, you probably cannot find the exact models.
@@CTMKD oooh OK ok thanks by the way
The law of rewinding a DC motor that operates on a large volt to operate on a lower
Where do you buy your 18650s at?
Super!!! 👍 PowerPoint
Excelente video . Me encantaría q seas más específico en como conectar el módulo .TENGO un atornillador12v inalámbrico y sus baterías no dan más , les puse 6 de litio y querria saber como conectar el módulo paso a paso. Muchas gracias . Soy Rafa de Argentina
Cool work. I have a question why not remove the new charge in the old case, there is clearly enough space there.
Yes, great idea. I want to use this charger to charge another battery type.
Bro great job. what you do after restore. you keep it or sale it?
I still keep it.
@@gear_show but still u have so many of them.
Rather than use the spot welder could the tabs be soldered on?
never ever attempt to solder battery cells. theres a reason to use the spot welder: this welds instantly with no heat. heating a lithium cell == boom!
Could you put a link from where you acquire the batteries?
Hi.. what's the deference between enhanced and balanced version of battery board ?
where to buy that circuit board connected to the lithium batteries? without it, will the drill works?
That's called a BMS board. Just search for it on eBay, and make sure It suits how many cells your using and amperage draw
I understand the battery upgrade, but how do I charge it now? Because Li-on will not charge with the original charger from this winch
It's in the video at the end
did you modify the original charger?
May I know the tips to choose battery for drill as battery come with different discharge rating..so which is the minimum? Thanks so much in advance 🥺🥺🥺🥺
You should choose high drain current battery for power tool.
@@gear_show may I know what is the minimum?
ผมชอบดูครับ จากประเทศไทย🇹🇭🇹🇭
Thank you so much!
This video is sponsored by Arm and Hammer baking soda & Acme Screws!
How much roughly in cost is it for you to rebuild and convert a battery pack like this? Also whats that awesome soldering machine called that you use to weld the battery connectors? Im new and still learning so i apologize if these are stupid questions.
How does the baking soda work on cleaning the plastic with hot water? Never seen that before but from watching a couple of your videos it seems to work well. Why this instead of any other cleaner?
Looked like it was baking soda, hot water and then powdered detergent. Baking soda is typically used for removing odors but it is also added to different products to help boost cleaning properties. Works great in laundry. If you can find "borax" it great on its own.
Could you share where to buy battery cells?
i want your drill in my collection that looks so great to have
I ove these videos! :) I also upgraded some of my old tools with lithium batteries... but... but... where the hell do you get those "battery pack building" stickers and metal pieces?!?
ES0620386328196000004065
better without music
Hi as wonderful as your videos are one catch you need to brush up please make the BMS connection clear and visible to understand you usual do that in a jiffy
That screw test really does show that phillips headded screws are still fine!
I think those are JIS Japanese industry standard, they dont cam out like Philips
Excellent work! Where can I get 5S BMS 40Amps? Thanks.
You can find them on Aliexpress, Amazon etc.
10.6V, not 12V. after you charge the battery, of course you will measure 4.2V....but next day it will be 3.6V/3.7V
The voltage of a lithium cell reflects its state of charge. It goes from around 4.2V when fully charged down to around 3.0V when discharged.
Good for you to show this, it's only been done 10.000 times before! :-)
Hi please tell me the runtime after this change
BUT DID YOU USE SAFETY GLASSES!?!
Yes, I did
Neat build but how do you charge the new battery pack now, you can't use a nicad charger to charge that pack properly.
I charged them with li-io charger. I modified nicd charger already.
Is the charger good to use?
Hello brother ! Do you have any secondhand impact driver low price for sell?
Please email me
@@gear_show oh sorry brother! Where are you?
Собрал, забыл вставить верёвку, за кадром ещё раз разобрал. Думал не заметим.заметили))
where you buy spot welding?
3:20
sir?
Конструкция напоминает импакт от Hitachi
Hi can you link where the batteries were purchased
I bought them from 1688 website
Is that the original charger?
Very good 👍
Thank you 👍
BMS 3s 20A can’t for National-drill!
It seems to work
cái này nó làm chỉ để up video thôi
Diferente dos outros vídeos,essa ferramenta deu menos trabalho.Já que ela está em boa condições.Apenas as baterias.
Hi, are you form Japan? Nice to know you.
may I know where did you buy these batteries, charger and the BMC protector? :3
Bms 3S 20A for drill ? No Auto Cut ?
Auto recovery and also auto cut
Why is the hamer pladtick?
this project costs MORE than a brand NEW lithium drill. those batteries are expensive. worst of all, many of these batteries are fakes, especially from amazon and ebay. not worth it.
I must of missed the part where he says to make sure to buy all your batteries from ebay and that this is a cost effective way of reviving dead battery packs. What do you like to do for fun? Because i can tell you its probably not worth it either yet you still do it, atleast this guy is saving these tools from going into landfills and providing educational content.
you the master
Thank you so much!
What's that spray wax? Link?
I bought this spray from car accessories shop.
ilave edilen elektronik parçayı nereden temin edeceğiz.
I want an explanation, please. I used the same bms 3s 20a but i found a problem is it can not star run the drill . Is 20a enough?
Please reply me
your batteries are high current for 20a bms
If you slow-start the tool it may run, but basically this 20A bms cuts off the current too early. Try 35A or 40A - depending on what you can get access to.