I just read another post about insurance. I bought a new jeep srt and some idiot ran into it and didn't have insurance. Atleast you are good in the department. Believe me that's a nightmare. The bad thing was that I had not even made the first payment on the thing.
JUIC3D Good info on the late 14s having the 15 heads... Does that mean they also have the 15 manifold? And are the 15 heads swappable to the 11-13 coyotes? Thanks man, sorry about the car
How much power the stock motor made when you went 8.6 at 156 mph on ~14 psi ? If you don't mind asking of course, You gotta be making over 900 and some change easily, specially on twins precision 6266's billet series turbos, Good luck with the new project putting this epic setup into the new car...👍
Glad to see you're ok. Sorry about the car. Glad to hear you're going to work on building another beast. Just goes to show everyone how strong these coyote motors really are. The motor looks good still because spot on tuning and really good fuel. Weren't you on e85? Can't wait to see what's next!
Stephen Turner Thanks Stephen! Ya, the motor looked spotless when I tore it apart. E85 for the majority if its life with Amsoil Sig series and Dominator oil changed every 3k miles (excess I know, but I like to on the safe side when pushing limits)
Are we going to see another snow white and more vid's mate ? orsome machine we just got the 2015 mustang over here now in Australia hope Hellion make a R/H version T/T set up for us , Thumb's up from me mate (;
+perfectpete1974 Unfortunately Snow WhiTTe is dead but my new car NighTTmare is alive and well. I've been racing and working on it pretty much non stop since I bought it. There are some videos on my page of the new car.
Great video. But where's that powergli.... I mean "stock" 6R80 you already pulled out huh lol. JK bro. You should put all that stuff in a fox and shoot for 7's. I was curious if your motor had the Boss/2015 rods or if it had the regular coyote rods? Its difficult to tell from those angles. The boss rods are suppose to be considerably stronger.
MaddCow99 They are coyote rods. It's hard to tell but if you look closely, you can see the thinner "I" part of the beam that is indicative of the coyote rods. The trans was already pulled and sent out to be built so it wasn't featured in this video. It's well-known they're strong enough to hold 1000whp for a little while at least
JUIC3D Yeah, I know the Boss/2015 rods are thicker and made from better metal. I have a set going in a 4.6. I could only see the sides and couldn't tell. How many miles and passes did you have on the car since it was boosted? Your tune must have been spot on. The internals still look good. But I suppose they will look fine until they fail.
MaddCow99 The give away of them being coyote rods is the thinner sides which you can tell if you look closely. Car had over 9k miles with the car being boosted since 1800. Had about 130 passes on the car with the majority of them being 9 seconds or better.
Adam Adams Because the car was deemed a total loss. I bought it back, pulled the good parts out of it and am selling the rolling chassis (what's left of it)
+wa buster You ain't lyin! I was exhausted by that point and my back was killing me. I should have grabbed the screw gun but didn't think about it. Plus it was my first time and I didn't realize the oil pick up was bolted in more than one place. lol
I love it when people call bullshit.
I just read another post about insurance. I bought a new jeep srt and some idiot ran into it and didn't have insurance. Atleast you are good in the department. Believe me that's a nightmare. The bad thing was that I had not even made the first payment on the thing.
Haters gonna hate bro....haters gonna hate.
mdog33333 That's their job :)
JUIC3D
Good info on the late 14s having the 15 heads... Does that mean they also have the 15 manifold? And are the 15 heads swappable to the 11-13 coyotes? Thanks man, sorry about the car
smokeum12 Negative on the manifold. Still the 11-14 version and yes I believe the 15 heads are backwards compatible with 11-14s
How much power the stock motor made when you went 8.6 at 156 mph on ~14 psi ? If you don't mind asking of course, You gotta be making over 900 and some change easily, specially on twins precision 6266's billet series turbos, Good luck with the new project putting this epic setup into the new car...👍
+cyoan I'm not sure since I never dynoed it on that much power. On 10ps it made 762whp though
+JUIC3D Nice numbers man! Keep up the good work on the next project! Keep us posted! 👍
Glad to see you're ok. Sorry about the car. Glad to hear you're going to work on building another beast. Just goes to show everyone how strong these coyote motors really are.
The motor looks good still because spot on tuning and really good fuel. Weren't you on e85? Can't wait to see what's next!
Stephen Turner Thanks Stephen! Ya, the motor looked spotless when I tore it apart. E85 for the majority if its life with Amsoil Sig series and Dominator oil changed every 3k miles (excess I know, but I like to on the safe side when pushing limits)
Sorry about the car bro. Glad you are ok!!!! Any plans for a new one?
chris frazier Ya new one is in the works
Are we going to see another snow white and more vid's mate ? orsome machine we just got the 2015 mustang over here now in Australia hope Hellion make a R/H version T/T set up for us , Thumb's up from me mate (;
+perfectpete1974 Unfortunately Snow WhiTTe is dead but my new car NighTTmare is alive and well. I've been racing and working on it pretty much non stop since I bought it. There are some videos on my page of the new car.
Just curious to know what all are you selling of the wreckage, including the interior?
Cliff Parham The entire roller is for sale. No engine or trans, everything else is there though.
Where is it listed for sale? Or would you rather me contact you via text, phone, email, etc?
Cliff Parham Shoot me a message
How much much for the leather?
Cliff Parham Not looking to part it out right now. Just looking to sell the whole roller as is, interior, headlights, body panels, etc etc
Great video. But where's that powergli.... I mean "stock" 6R80 you already pulled out huh lol. JK bro. You should put all that stuff in a fox and shoot for 7's.
I was curious if your motor had the Boss/2015 rods or if it had the regular coyote rods? Its difficult to tell from those angles. The boss rods are suppose to be considerably stronger.
MaddCow99 They are coyote rods. It's hard to tell but if you look closely, you can see the thinner "I" part of the beam that is indicative of the coyote rods.
The trans was already pulled and sent out to be built so it wasn't featured in this video. It's well-known they're strong enough to hold 1000whp for a little while at least
JUIC3D Yeah, I know the Boss/2015 rods are thicker and made from better metal. I have a set going in a 4.6. I could only see the sides and couldn't tell. How many miles and passes did you have on the car since it was boosted? Your tune must have been spot on. The internals still look good. But I suppose they will look fine until they fail.
MaddCow99 The give away of them being coyote rods is the thinner sides which you can tell if you look closely. Car had over 9k miles with the car being boosted since 1800. Had about 130 passes on the car with the majority of them being 9 seconds or better.
Hey brother how you been?
What happen?
Adam Adams Got rear ended a couple months ago, about 3 weeks after going 8s
No insurance?
Adam Adams Absolutely had insurance, so did the guy who hit me
So if it was weeks ago why is it not fixed?
Adam Adams Because the car was deemed a total loss. I bought it back, pulled the good parts out of it and am selling the rolling chassis (what's left of it)
u need to invest in an electric ratchet, that windage tray kicked your ass
+wa buster You ain't lyin! I was exhausted by that point and my back was killing me. I should have grabbed the screw gun but didn't think about it. Plus it was my first time and I didn't realize the oil pick up was bolted in more than one place. lol
+JUIC3D Impressive numbers, looking to see your new build @bmp