@How-FixIT Would you happen to have a link to by the ribbon cable that connects both halves of the controller? I think mine is broken. Because it looks chard.
Can I use original PS5 joystics to replace the ones in Pro controller? They look the same on first glance, but maybe something is different and it wont fit? I've changed PS5 joystics multiple times, and for Pro controller it looks way easier, so I would just do it now if I can change it with what I currently have at home.
Mine were too! I almost gave up but very little turning pressure while pressing down into the screw very hard finally worked. They were tricky to get back in too.
I tried 3 different screwdriver heads and then very firm pressure into the screw while trying to turn and it finally worked. I ended up using a 000 Phillips screwdriver for the first 2 screws and then a 00 for the rest. I ended up unscrewing them with the controller held in my hand on my lap because it gave me better control. I hope you can get it to work.
Hi, i'd like to have te ABXY buttons if it was a xbox controller (basically swaping a with b and x with y), do you know any method that not involves remaping it from the console? thanks
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Some freak ants decided to make my controller their home. Thank you very much for this tutorial, now I can clean ir properly
Idk why but I find that so cute I know it must be frustrating I’m sorry but ants in a Nintendo controller is so cute
same.
Thanks a lot, man. Really helpful video
Your videos and content is always appreciated brother. Thank you and merry Christmas to you and family
@How-FixIT Would you happen to have a link to by the ribbon cable that connects both halves of the controller? I think mine is broken. Because it looks chard.
Very good guide! Thx
Can I use original PS5 joystics to replace the ones in Pro controller? They look the same on first glance, but maybe something is different and it wont fit?
I've changed PS5 joystics multiple times, and for Pro controller it looks way easier, so I would just do it now if I can change it with what I currently have at home.
my procon's handle screws are insanely tight and I can't get em out
Mine were too! I almost gave up but very little turning pressure while pressing down into the screw very hard finally worked. They were tricky to get back in too.
Super helpful; all the other guides I saw had a different ribbon interface at 16:%4, so I was wondering how to get the ribbon cable to stay in
Tremendo video, 👏👏👏👏
And what about the nfc reader?
0:38 what about the long head screwdriver? It‘s my dealbreaker
I just used a small screwdriver from a set bought at the dollar store. Cheap but still works so I hope it’s not a big problem for you.
Try also clearing your stuks from hair and dirt and maybe the stick drift will be gone mine was th same problem
which part of thie controller is the motion controls
Thanks 🙏
Just saved me 🙏
What if the first 2 tiny screws are already stuck 😢
I tried 3 different screwdriver heads and then very firm pressure into the screw while trying to turn and it finally worked. I ended up using a 000 Phillips screwdriver for the first 2 screws and then a 00 for the rest. I ended up unscrewing them with the controller held in my hand on my lap because it gave me better control. I hope you can get it to work.
Mine looks pretty Different.... And I have Big Problems with the Tiny Flex Cable... Cant put it back...
Hi, i'd like to have te ABXY buttons if it was a xbox controller (basically swaping a with b and x with y), do you know any method that not involves remaping it from the console? thanks
Left Right Zelda
What a stupid way to make a trigger.