I suggest removing the muzzle break if you can as it can cause problems with the sabot and make it less accurate (if you care about that) Still really cool to see :D
@@BunsenOblivious At those pressures and velocities you are probably correct, but with an enlarged bore you could likely install a sleeve and check velocity/ accuracy differences. Muzzle devices are an issue with sabot rounds out of rifles with breaks, and they also have enlarged bores. Baffle strikes are a thing even in correctly concentric builds. Also, that potato cannon is awesome.
The first several seconds I thought that was dumb. THEN I started to notice the metal frame, the elevation, the storage containers. The overall design was nice. I could see that the first 2 rounds were WAY wrong. They were leaving the barrel sometimes pointing left when they should be pointing forward. Those were way too light. The last ones were perfect. They flew straight the entire time. Good job! don't be discouraged by the haters. What's your fuel??
@@RemoteCamper thank you 😊 it’s been a lot of trial and error lol. I use powerstick body spray. It’s $1 a can and extremely reliable. 👍 also you should check out my other videos. I have more designs besides these. 😉
i would take the compensator off that thing... its muzzleloader, it should not be there in first place... and recoil does not matter on gun thats mounted on ground... if it even changes anything.... you would reload it 50x faster and you would have non obstructed view of whats happening after it leaves the barrel. nice job anyway, i would love to do domething similiar... i have small functional black powder canon... some larger one would be fun
Cool looking project! The darts tumble too much, I think they might be too heavy in one point, lessening the overall moment of inertia. While they certainly should be better in your design with the fat top and far away fins, I suggest trying a more of an "arrow" shape, like the APFSDS tank ones. The mass being concentrated in the forward section might make it too easy for fins to overcompensate. Good luck! :)
@ I am going to build several reloadable loading devices to load from the rear in the future. They will basically be like having several prepared shells. 😉
@urodblin I would loose power and velocity. However I am planning on building a bigger more powerful cannon one day. My plan is for it to have two combustion chambers.💥 Might take a long time before that though. 😉
I'll be waiting for the explosive ammunition just do one thing for me if you will put explosive powder on it pls make it the zinc sulphate flash powder
@@ZombieHunter-ms4uy I would love too. 🧐 I want to do plenty of research though. I don’t want to break any laws. I have several ideas for them but if it’s illegal it’s a no go. 😉
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Dude is casually making one of the coolest things I've seen
@@SockTie thank you 😊
Good work, great fun
I suggest removing the muzzle break if you can as it can cause problems with the sabot and make it less accurate (if you care about that) Still really cool to see :D
@@that_one_guy_2122 the muzzle break has an enlarged bore 👍 no worries 😉
@@BunsenOblivious At those pressures and velocities you are probably correct, but with an enlarged bore you could likely install a sleeve and check velocity/ accuracy differences. Muzzle devices are an issue with sabot rounds out of rifles with breaks, and they also have enlarged bores. Baffle strikes are a thing even in correctly concentric builds.
Also, that potato cannon is awesome.
The first several seconds I thought that was dumb. THEN I started to notice the metal frame, the elevation, the storage containers. The overall design was nice.
I could see that the first 2 rounds were WAY wrong. They were leaving the barrel sometimes pointing left when they should be pointing forward. Those were way too light. The last ones were perfect. They flew straight the entire time. Good job! don't be discouraged by the haters.
What's your fuel??
@@RemoteCamper thank you 😊 it’s been a lot of trial and error lol. I use powerstick body spray. It’s $1 a can and extremely reliable. 👍 also you should check out my other videos. I have more designs besides these. 😉
@@BunsenOblivious watching them now.
This is so dope!
@@McBacon12 thank you 😊
Hold up. Potato cannon howitzer! You have my attention
@@HarshmanHills you should check out my channel. I’ve got some awesome shots on there. 👏 👍 😉
i would take the compensator off that thing... its muzzleloader, it should not be there in first place... and recoil does not matter on gun thats mounted on ground... if it even changes anything....
you would reload it 50x faster and you would have non obstructed view of whats happening after it leaves the barrel.
nice job anyway, i would love to do domething similiar... i have small functional black powder canon... some larger one would be fun
@@VR46Monster I plan on building a loader that will load from the rear in the future. The muzzle break it mostly just cosmetic.
The front is for looks. Its a Howitzer after all.
Cool
Say bow😂😂😂 yes thats how one part of the world says it.
Hillarious
Cool looking project! The darts tumble too much, I think they might be too heavy in one point, lessening the overall moment of inertia. While they certainly should be better in your design with the fat top and far away fins, I suggest trying a more of an "arrow" shape, like the APFSDS tank ones. The mass being concentrated in the forward section might make it too easy for fins to overcompensate. Good luck! :)
I do have some awesome ideas with arrows planned 😉
you know whats funny i just 3d printer a sabot for eggs for my potato gun... it also has a silencer :P
Nice 👍
Have you ever tried to load your cannon from the breach instead of from the muzzle?
I think it would make reloading a bit faster
@@LorenzoFerrari-d5e I mentioned in my newest video that i’m planning on building a rear loading tool in the future. 😉
@@BunsenOblivious
Sorry, that was literally your first video I've seen, I couldn't know
@ lol just letting you know I’m already on top of it. Great minds think alike. Lol 😂
If you put more power behind it there's even a chance the dart will actually stabilise before it descends
@@mothmagic1 I will be upgrading the barrel in the future to increase power 💪 😂 😉
@@BunsenOblivious can u make one that uses shells instead of being muzzle loaded? that'd be awesome
@ I am going to build several reloadable loading devices to load from the rear in the future. They will basically be like having several prepared shells. 😉
@@BunsenOblivious omagad, that'd be awesome.
make them 100mm 💀💀
@urodblin I would loose power and velocity. However I am planning on building a bigger more powerful cannon one day. My plan is for it to have two combustion chambers.💥 Might take a long time before that though. 😉
I'll be waiting for the explosive ammunition just do one thing for me if you will put explosive powder on it pls make it the zinc sulphate flash powder
@@ZombieHunter-ms4uy I will look into it 👍
Can you design a explosive munitions
@@ZombieHunter-ms4uy I would love too. 🧐 I want to do plenty of research though. I don’t want to break any laws. I have several ideas for them but if it’s illegal it’s a no go. 😉
Nice!
Beehive rounds?
Make a video on how you made the whole thing the cannon and the elevation system and stuff please
@@AlexCoyle-qw1nk I’ll make a full walk around and explanation video in the near future. 👍
@BunsenOblivious ok thanks
@@BunsenOblivious oh and I'm sorry if me asking sounded rude
@@AlexCoyle-qw1nk no worries 😉
@@AlexCoyle-qw1nk just a few more videos for the walk around. I have several videos planned
Are you sure the sabot isn't hitting the muzzle device on the way out?
@@10ring it’s ok it has an extra enlarged bore
prarie dogs be like.........kool cannon
u should contact the cannoneer (more recent youtuber like urself) he needs u ;p
Cool thing dude! What sort of distance are you getting from each weight group?
@@PlayingWithFireOutdoors the little ones went about 50-60 yards the big ones went about 100 yards and 175 yards respectively. 👍
😮😊❤👏👏👏👏
Brüder erhebt euch ❤
that's right just look down the barrel
That's what I told your mom
i suggest you tune off camera
@TAOFLEDERMAUS
@@liliwinnt6 love the channel 👌
@@BunsenOblivious lol
@@BunsenOblivious and i wish he could see this project of yours
@ that would be awesome 👏