I went about the same route as you. LS2. Conservative street cam. Long tube headers. 4L80E. 3.73s. Stock wheels and stock size rubber (Nitto 555s). Camaro FEAD. 399 HP on the dyno. An absolute joy to drive, but the seats aren't comfortable to me. When you go to tune it upgrade the fuel pump and lines. The stock fuel pump won't support a LS2 and will burn out. I gotta address the stereo, but I do intend to keep it simple. You got a great car. Drive it.
Thanks for watch. We have pretty much the same swap.. lol.. The fuel system is upgraded as well.. all is good, just have to figure out this vibration at 50 mph.
That’s a nice swap. You did the correct transmission, the first time. I did an LS2 swap some years ago to my 2000 S10 Extreme Extended Cab. I used the wrong transmission, 3 times(3strikes). The 4L60e doesn’t last, no matter who builds it, and with whatever parts. I put a built 4L80e in it last year. You did a beautiful job on that Impala, however, you need to do a rust abatement program on that underside. I was born and raised in Detroit and hadn’t seen rust like that, since I left home in ‘74. I flashed when I seen that rust. I went to the military, and when I discharged, I stayed in California. No rust there. I’m in Colombia 🇨🇴 South America now, no rust down here either. I’m bringing my S10 down here next.
I just found this video as I used to own 2 Caprice LT1 cars that had the 9C1 package. What's sad is my car was near perfect and sold it for I think $5K in 2003, anyway love the content
Dude I’m so inspired by your car. I have a 94 impala ss, of course it’s not a 96 but it’s still my baby. I want to do some work on it just I know nothing about cars lol nor do I have a garage lol.
Thanks bro.. more to come but yea just wanted to get it up and running for now.. looking at doing the T56 swap.. not in it for racing just having fun!!
@@CarolinaMikeGarage would love to manual swap my truck but weight and high tq are a bad combo lol would have to dump alot in a manual to keep it happy in a crew cab but that SS should be lots of fun with a t56 and small cam
Chop the back is ok. The LEDs shine bright. I have LEDs in the front as well but honestly it’s too dark. I have another set that has been painted and cleared that isn’t so dark.
I did the exact same swap except the 4l80 I’m having trouble with my dash no speed or rpm signal with current performance harness did you have this issue?
On the 4L80E you have to make sure the main trans plug is not upside down. That’s what my problem was. I spent months trying to figure it out then boom. Check it out.
She is beautiful bro! Go with replicas in the 22". 22s don't take it from its original integrity of a big body muscle car. Goin larger looks like you wanna go donk style.
It was a stock cable for a 01 tahoe. I used a 01 tahoe ECM drive by able.. and my harness is my stock 96 SS harness that i sent to current performance to have them rework it to my engine and trans connections.
My experience is 373 gear is not really faster in the quarter, hope you'll update your experience.. Thinking about LSing mine,,, looking for a good source of reliable info... Did you have the frame sewn up? Keep the information coming..
OK so why not just get a new IMPALA Engine? What are the advantages of the Corvette engine? What’s the difference is a better mpg is it faster is it louder? Is it more reliable
Thanks for checking out the channel I didn’t do anything to the engine other than replacing accessories to make it fit correctly. The motor only has about 50K miles so its still brand new
Funny I just reached out to Mr impala about some door panels and he said i have to contact him in october because he's booked. So I guess you getting yours in September you are lucky. How much is he charging? His website says $1200. Is that accurate? Minus the shipping I'm in cali so I know my shipping will be around 300.
Mrwhodat1 yea man.. I think I got in at the right time.. he was hesitant at first but yea I’m excited. Then I’m going to order some seat covers from Rick Deez.... My total was around 1400 with shipping. Then I
If you put a Camaro V8 engine in there? Would you get better gas mileage and be able to use regular gas because I think the Corvette engine is only premium right
What year camaro are you talking about. LS1 or LS3. I run premium gas because that how my car is tuned. Like I said in the other post. It’s just so many different variations you can go with. Reliability and good gas mileage get you a 5.3/4L60e and ride.. I wanted more horsepower. Cam coming soon for my SS..
What’s the difference between the 5.3/4L 60 E, versus the standard package that comes with the 95? Also what car is the 5.3 engine from thank you. Is that a Camaro engine or a Corvette engine 5.3
@@miamimagicians there a lot of videos on RUclips breaking down the different LS platforms.. the LS1 is a 5.7 and the LS3 is a 6.2.. all depends on what year the camaro is.
those impalas are sexy as hell man, im loving all of this, BTW get rid of them wheels everything looks top notch but the wheels bring them down.. also did anyone ever comment on how much you have a radio voice?
So did you swap the entire engine for a Corvette engine? Completely? Or just added some new Corvette parts to make the car faster? I don’t quite understand
By any chance do you have part number for the lower Radiator hose you use? I watch the Parts List Video about 15 times and you don't mention anything about the Radiator hose ...
@@CarolinaMikeGarage I hope so I have a 02 camaro SS I’m putting a LS2 in as we speak. I’m going to take the ls1 out of it and put it in the impala when I pick it up
@@CarolinaMikeGarage thanks for the reply big dog, I am currently searching for an LS2 6.0/4l80e. I just wasn’t sure if I could trust eBay. I have never personally known anyone who has ordered a complete pullout engine from eBay. Normally we would go to local pick and pulls.
Not being an asshole bro cover those holes for the a/c lines 2 much money for a compressor to get dirt in it and then mess up the whole a/c system once you get it hooked up clean swap though
@@CarolinaMikeGarage thank you for replying. It sucks when you're doing this for the first time and nobody wants to help. I swear I won't have a thousand question as I ask another one. Did you use your factory harness modified or purchased an aftermarket to be able to us AC and cruise control?
Carolina Mike Garage ok it sounds good 👌🏾 bro , I would go with billet wheels . I went with speed tech suspension on my SS and Viking Coil overs and 3.73 gears ⚙️
Beautiful Impala, can’t wait to see it all done. Wow, there are people who like me truly love the 96, Impala.
Appreciate it!!
I went about the same route as you. LS2. Conservative street cam. Long tube headers. 4L80E. 3.73s. Stock wheels and stock size rubber (Nitto 555s). Camaro FEAD. 399 HP on the dyno. An absolute joy to drive, but the seats aren't comfortable to me. When you go to tune it upgrade the fuel pump and lines. The stock fuel pump won't support a LS2 and will burn out. I gotta address the stereo, but I do intend to keep it simple.
You got a great car. Drive it.
Thanks for watch. We have pretty much the same swap.. lol.. The fuel system is upgraded as well.. all is good, just have to figure out this vibration at 50 mph.
Check your drive shaft, dude.
@@stokerboiler Yep...you HAVE TO put the U-Joints symmetrical(phased) or you will get vibration.
That’s a nice swap. You did the correct transmission, the first time. I did an LS2 swap some years ago to my 2000 S10 Extreme Extended Cab. I used the wrong transmission, 3 times(3strikes). The 4L60e doesn’t last, no matter who builds it, and with whatever parts. I put a built 4L80e in it last year. You did a beautiful job on that Impala, however, you need to do a rust abatement program on that underside. I was born and raised in Detroit and hadn’t seen rust like that, since I left home in ‘74. I flashed when I seen that rust. I went to the military, and when I discharged, I stayed in California. No rust there. I’m in Colombia 🇨🇴 South America now, no rust down here either. I’m bringing my S10 down here next.
I just found this video as I used to own 2 Caprice LT1 cars that had the 9C1 package. What's sad is my car was near perfect and sold it for I think $5K in 2003, anyway love the content
I did 20 inch ridler 695s on my 96. It looks simple, but nice.
Dude I’m so inspired by your car. I have a 94 impala ss, of course it’s not a 96 but it’s still my baby. I want to do some work on it just I know nothing about cars lol nor do I have a garage lol.
I appreciate it man..
I think the sandman reps will look clean!!
James Byrd I love the look of them!
Swap lookin & soundin good. Either ones sandman or billets, cant go wrong.
James A facts
Beautiful home you got I really hope I get one like yours
Thanks bro!
Its about time you dropped that video LOL. She looking good. I placed the order on my front accessory drive thanks for the help💯💪🏾
Lol.. I know finally.. I will update the parts used for my accessory drive in a few I had to get some items from different vehicles.
Carolina Mike Garage how much did you pay for the suspension work
You're going to have to take care of that rust my guy other than that she's clean
It’s all surface. I’m going to wire wheel everything and then coat it.
No cam? You did good by leaving it stock lol. I swapped my truck, and it has became a money pit. Nice car though, love the all black look
Thanks bro.. more to come but yea just wanted to get it up and running for now.. looking at doing the T56 swap.. not in it for racing just having fun!!
@@CarolinaMikeGarage would love to manual swap my truck but weight and high tq are a bad combo lol would have to dump alot in a manual to keep it happy in a crew cab but that SS should be lots of fun with a t56 and small cam
You got a dope build going on man. I'm bout to start vlogging on my 95 SS. Starting with some 24s and I got all new steering I gotta install
Nice. I’ll be watching your build.
!!!!why I found this sick content now I missed a lot😅
sweet black on black with a black driver in it.
Everything is looking good man!
Btw anyone say you sound like Scottie pippen?
Leflame 69 thanks bro.. and naw that’s a first. Lol.
Such a cool car. I love those cars slammed to the ground.
Thanks for checking it out man!
Nice for real.you garage just like mine.74 69 95 impalas.3 for me too.
Nice!!
Man I just gave a like cuz only the title hyped me up yo
Thanks for checking it out!
My dream car!! Love it bro
One of mine too!!
Dats d look I want like it came n there! Really nice Brother 👌
Appreciate it!
We got a 94 ss yours looks sick tho
Appreciate it!
96 Impala brought me here with a like. Sub for the Grand National.
Olu Art GN video coming next week.
Nice collection.
Appreciate it. Just picked up another toy.. video dropping soon
Please do a video of everything you do on the impala ss I’m redoing mine to
timthomas407 that’s the plan. More content on the way.
Nice build. Do you have a part number for the throttle cable
Jamario Walkee 15040848 from a 01 Tahoe.
Great vid brother!! Did you have to modify the transmission tunnel forthe 4l80 transmission
No modifications to fit the Trans.
I'll buy that radio bezel
LOVE you build!! Did you reuse factory Impala AC lines to the compressor?
Hey Mike thanks for sharing your knowledge. This is one of the cleanest swaps I’ve seen. Did you use an F body kit from ICT?
What kind of front light and back light setup? I love it and cons to it honestly? They dark asf but if you can see you can see
Chop the back is ok. The LEDs shine bright. I have LEDs in the front as well but honestly it’s too dark. I have another set that has been painted and cleared that isn’t so dark.
Chop the rear and the front were painted with car paint and cleared.
Thats a good looking Swap ✊🏾
Life With Lonno thanks bro.. can’t wait to see yours complete!
Carolina Mike Garage yeah me too, in due time bro 🤞🏾
Do you have a link for longtube headers you used or what kind did you use thanks
www.brphotrods.com
Car looks sick good job
Appreciate it!
I did the exact same swap except the 4l80 I’m having trouble with my dash no speed or rpm signal with current performance harness did you have this issue?
On the 4L80E you have to make sure the main trans plug is not upside down. That’s what my problem was. I spent months trying to figure it out then boom. Check it out.
Info on Double Din bracket?
The detail SS or Etchus.com
She is beautiful bro! Go with replicas in the 22". 22s don't take it from its original integrity of a big body muscle car. Goin larger looks like you wanna go donk style.
Hey bro what is the part number for the steering shaft
good video. awesome stable.
Thanks!
and the kid's bikes in the garage where the car should be. i feel it. haha
How did u do it drive by cable? Can u tell me what U use, what ecm and harness,
It was a stock cable for a 01 tahoe. I used a 01 tahoe ECM drive by able.. and my harness is my stock 96 SS harness that i sent to current performance to have them rework it to my engine and trans connections.
What Optima battery is that ? I’ve been wanting to upgrade
Yellow top.
My experience is 373 gear is not really faster in the quarter, hope you'll update your experience.. Thinking about LSing mine,,, looking for a good source of reliable info... Did you have the frame sewn up? Keep the information coming..
I probably will never see the track. Just building my cars to have fun. I love the power of the LS2.
beautiful
Appreciate it!
OK so why not just get a new IMPALA Engine? What are the advantages of the Corvette engine? What’s the difference is a better mpg is it faster is it louder? Is it more reliable
New Impala engines a front wheel drive. 94-96 impala are the last rear wheel drive car.. plus the corvette engine makes double the power..
Does a double the power and then you only get half the gas mileage?
Did you have any problems with your header scraping?
Only on speed bumps!
Nice brother!
Hello bro my question is when you redid the engine did u buy stock 6.0 stuff or upgraded some things
Thanks for checking out the channel I didn’t do anything to the engine other than replacing accessories to make it fit correctly. The motor only has about 50K miles so its still brand new
What was your measurements on your drive shaft?
Darrell Adams I think it was a 57 1/2.. but you know it all depends on the motor mounts and trans.
Hey Mike what cold air intake system do you use?
The K&N intake from my LT1.
Funny I just reached out to Mr impala about some door panels and he said i have to contact him in october because he's booked. So I guess you getting yours in September you are lucky.
How much is he charging? His website says $1200. Is that accurate? Minus the shipping I'm in cali so I know my shipping will be around 300.
Mrwhodat1 yea man.. I think I got in at the right time.. he was hesitant at first but yea I’m excited. Then I’m going to order some seat covers from Rick Deez.... My total was around 1400 with shipping. Then I
If you put a Camaro V8 engine in there? Would you get better gas mileage and be able to use regular gas because I think the Corvette engine is only premium right
What year camaro are you talking about. LS1 or LS3. I run premium gas because that how my car is tuned. Like I said in the other post. It’s just so many different variations you can go with. Reliability and good gas mileage get you a 5.3/4L60e and ride.. I wanted more horsepower. Cam coming soon for my SS..
What’s the difference between the 5.3/4L 60 E, versus the standard package that comes with the 95? Also what car is the 5.3 engine from thank you. Is that a Camaro engine or a Corvette engine 5.3
@@miamimagicians there a lot of videos on RUclips breaking down the different LS platforms.. the LS1 is a 5.7 and the LS3 is a 6.2.. all depends on what year the camaro is.
those impalas are sexy as hell man, im loving all of this, BTW get rid of them wheels everything looks top notch but the wheels bring them down.. also did anyone ever comment on how much you have a radio voice?
Crypsis Thanks for checking out my videos.. I like the blacked out look but I am ready for some new wheels.
So did you swap the entire engine for a Corvette engine? Completely? Or just added some new Corvette parts to make the car faster? I don’t quite understand
Yes it’s a LS2 out of a C6 corvette.
So how much did they charge u for your harness
Close to 1K
Hey man wat kinda brackets did U use to mount yo A/C & Alternator dwn low, wat yr car its frm?
The ac bracket is from a 01 camaro with LS1. And the alternator and power steering pump brackets are both from ICT billet!
That shit clean bro bro!
Did you you have to replace the shift cable?
L Brown no.
😎
Yes sir!!
Do u got the part number for the bottom and upper radiator hose
It’s on my parts list video!
Thanks I’ll take a look at it bud
By any chance do you have part number for the lower Radiator hose you use? I watch the Parts List Video about 15 times and you don't mention anything about the Radiator hose ...
Man she look good....the install is top notch..was there a special bracket for the AC?
Larry Stevenson thanks man.. its the AC bracket from a 01 Camaro.
Thanks....again she sitting right LS Swap da world...lol
How much he charge to swap? Can he convert a FWD to a RWD?
Hit him up! But I doubt that!
How did you get ac to clear ? What motor mounts and what ac compressor is it if you don’t mind
01 Camaro ls1 AC Bracket and Compressor
Motor mounts were from BRP Hotrods
Nice looking car I just subscribed to your channel. I’ll be picking up a 96 this week.
Nice.. you are going to love it!
@@CarolinaMikeGarage I hope so I have a 02 camaro SS I’m putting a LS2 in as we speak. I’m going to take the ls1 out of it and put it in the impala when I pick it up
Great impala! What CAI did you use?
It’s a CAI for a 03 tahoe off Amazon!
How much a engine swap like that cost
Check out part 1. It gives the price break down. ruclips.net/video/ZVRnV1Br7-k/видео.html
🔥🔥🔥🔥🔥
Appreciate it!
on the exhaust did you do H or Y pipe. Just got my car 96 impala with LS3 swap this past friday.
Straight back right now.. but I may be doing some exhaust upgrades soon with the X pipe.
@@CarolinaMikeGarage I just had the x pipe done
Did you purchase the engine off eBay or an auction? Or do you have a trusted website
I found it on ebay but then hit the guy up and drove 4 hours to pick it up with cash
It was a corvette shop in PA. They specialize in rebuilding wrecked corvettes.
@@CarolinaMikeGarage thanks for the reply big dog, I am currently searching for an LS2 6.0/4l80e. I just wasn’t sure if I could trust eBay. I have never personally known anyone who has ordered a complete pullout engine from eBay. Normally we would go to local pick and pulls.
Sweet
Thanks man!
What headers you use?
Not being an asshole bro cover those holes for the a/c lines 2 much money for a compressor to get dirt in it and then mess up the whole a/c system once you get it hooked up clean swap though
Carolina....are you running stock fans?
Larry Stevenson yes stock fans.
And also bro how does she ride?
How much everything hit you for
This was a few years ago so it was not that bad. I did a price breakdown video!!
Hey bro, nice ride 4 real!!! Where did you get your steering shaft from?
What up bro..Summit racing.
Ok cool sounds Damn good to me!!! OH SHITS YEEEAH!!!😁👍👍
22 inches for sure
Yes that’s what I will go with.
Nice bro
Hey my dude the car and swap looks great. I see you still have your cruise control box under the hood. Do you still have it hooked up?
Marvin Walker yes it still has cruise control!
@@CarolinaMikeGarage thank you for replying. It sucks when you're doing this for the first time and nobody wants to help. I swear I won't have a thousand question as I ask another one. Did you use your factory harness modified or purchased an aftermarket to be able to us AC and cruise control?
What radiator did you use & driveshaft
Stock radiator is perfect.. and I had a drive shaft made.
Thanks for the info clean car
@@CarolinaMikeGarage the person who did your swap where are they located?
DD audio or sundown
How long the build take
Frank M a few months but now it’s in the shop getting the gears done.. still more to go..
Carolina Mike Garage ok it sounds good 👌🏾 bro , I would go with billet wheels . I went with speed tech suspension on my SS and Viking Coil overs and 3.73 gears ⚙️
What headers did you use?
Got them from BRP HOTRODS..
Nice….!!!
😍😍😍😍
👉🏾💎
22in billets
Yes that’s what I’m going to order!
I apologize for so many questions but are you running one stock fan or two
Larry Stevenson I’m running 2 stock fans..
Larry Stevenson you good man.. I’ll answer anything that I can..
Are you from Carolina? We might be family...lol
Larry Stevenson lol.. I am from nc
A👍🏾👍🏾👍🏾👍🏾I'm subb'n
Appreciate you for rocking with me!
22"sandman
banga8080 I love both.. it’s a hard decision..
Sandman
Yea I think that’s what I’ll go with
Impalas are horrible to swap. I have a swapped one but I wouldn't do it again...Here's mine!
ruclips.net/video/X5aXVMSlSn8/видео.html
Tell me about it bruh. I’m getting everything to knock out my square body and it’s way cheaper and easier to do.
Damn really??
Why exactly?
@@CarolinaMikeGarage
You mean the carlo in your garage?
🔥🔥🔥🔥🔥🔥
Appreciate it. Sub to the channel. I’m about to remix it!