Your motorized bicycle is very nice and I like the Jack shaft shifting system, I live in Mexico and I also have a motorized bicycle that I made myself in round 29 and I also made Jack Shaft which I like because it runs a lot and sounds like a motorcycle, I have reached speeds of up to 55 miles per hour and all the people stare at me when I pass
You did a damn good job on the installation. the looking on I've seen yet. I see you understand how you most avoid potholes and all that stuff, because it would hard on the tires and frame. One of things I do is use my knees like shock absorbers to lessen the impact on the tires and bike frame. But yeah, good job man
Word to the wise. Jetting where you have driveways every 10ft, it's not an if, it is just a when, someone or something sails right out in front of you. Great build very cool,stay safe Cheers
I know you are right buddy. I do usually stick to the speed limits if that helps. And I often wonder what's the difference between a motorized bicycle and a standatd motorcycle. I ride motorcycles on the roads. The bicycle makes just as much noise and stops just as quickly. There is risk with both motorcycle bicycle and motorcycle. Even a standard bicycle without a motor is dangerous on the roads, especially here in South Africa where there are no bike lanes and other drivers are more dangerous here.
Back 2k a 1970s Thunderbird ran a yielding green and pulls out un front of my right away green light,not seeing her before hand just on my turning green i blew through the stop traffic red light hitting her at 50 from 70ish but heres issue both front shocks blown back tire still had screw in its hole and i slid down on a slide to seconds controlling bike enough to hit tire to tire fronts on impact it launched me straight up and over her cars hood by 10 feet landing on Sonic Burger sidewalk on all fours like a cat limping for Edit2 weeks 😂 i thought it was my last ride on my 1990 650 nighthawk and it was too!
Прекрасно! Возникли вопросы: 1. Какой это двигатель? Это двигатель F-80 (66cc)? 2. Резонатор проектировали самостоятельно или где-то заказывали? 3. Насколько хорошо себя зарекомендовала обгонная муфта в педальном узле? Выдерживает ли все заводки двигателя? 4. Какой карбюратор используете? 5. Насколько быстро удавалось разогнаться? 6. Сколько миль накатали, и как давно эксплуатируете? 7. Насколько хорошо велосипедная трансмиссия выдерживает нагрузки? 8. Ощутима ли прибавка к мощности с использованием резонатора? 9. Насколько громко работает?
Hi. Thanks for the comment. 1. Its a pk80 motor with falcon 911 cylinder, mz65 exhaust, cnc head, dio reed intake. 2. Resonator is mz65 from USA 3. It has an ultra heavy duty freewheel bearing by the crank from sickbikeparts.com. Very strong. 4. Oko 21mm carburetor 5. Lovely acceleration. About 95km/h on a flat 6. Not sure. Maybe 3 years light use. 7. Drive train is ebike chain and sram steel cassette. Very strong. No issues. 8. Big increase in power from the exhaust. 9. It's loud. Makes a nice sound.
@@MotorizedBicycle1 Премного благодарствую за содержательный ответ! Отдельно благодарю за указание скорости в километрах. Ваша сборка богатая, по-американски дорогая. Комплектующие и характеристики впечатляют. Возникли ещё вопросы: 1. Каков расход топлива и каким бензином с каким маслом заправляете? 2. На сколько звёзд кассета заднего колеса? 3. Какую используете велосипедную цепь, и рвалась ли она у Вас из-за такой мощности?
@@Lubyagin only a pleasure. Happy to help. 1. Fuel consumption is really not good though i haven't measured yet. I use 95 unleaded and Castrol power 1 two stroke oil. 2. 10 speed cassette but i only use 9 of the sprockets. Not the smallest sprocket. I set the derailleur limits. 3. bicycle chain has never broken and it has lasted very long so far. It is an ebike chain. KMC e10. Much stronger than standard chains.
@@MotorizedBicycle1 that’s awesome man …… be safe and super cool I will work on a 100cc soon I just recently sold a 80cc so any ideas and where do you buy the parts .
quick question i was wondering what bike that is because i’ve been looking for the nice bike that has everything nice suspension nice all around tires and things that are nice and new
damn man! your bike looks good! where can i find some parts for my bike so it looks cool too?, I'm from Mexico and its almost imposible to find parts for motorized bikes here and I'm not good neither finding them on the internet, also i want to change some things to make it more powerful, also put a suspension but i can't find any, do you have any suggestions for were i can find good parts?
Great setup. It’s really a tricky thing to get the whole system running smoothly and reliably like that. I had a shift kit on a bike for about a month and then gave up on it. I still wonder every now and then if I had taken the time to get it right, how long the derailer/cassette would last. Anyhow, really you’ve got a nice little bike there bro.
Why dont you give it a go again? A sram steel cassette and kmc ebike chain is very strong and a derailleur wouldn't take any more wear than usual. A Shimano XT or SLX derailleur with the clutch/damper system in it is working perfectly for me. The derailleur isn't under any extra stresses if it's set correctly and changes smoothly. I can jump 3 gears at a time. I just close the throttle, pull the clutch in and change gears, like a motorcycle. I don't actually need to but i just do it anyway. If I was full throttle and changing gears aggressively maybe it would be a different story. Logically something would break like that. Chains never jump off because every is set correctly and perfectly aligned and tensioned. Also have to use high quality chains. Like buy the strongest rated chain you can find. Industrial for primary drive and go for strength and not light weight on Shimano/kmc single speed and final drive. Remember high end bicycle chains are thinner materials, light weight. So be aware of that. Look for the heavy duty stuff rarther than weight savings.
No it will actually reduce output power at rear wheel due to friction losses of the extra drive chains and bearings. So top speed will be reduced a bit. Though you will have far more acceleration and rideabilty. And if you are going down hill with a smaller final drive gear then you will be faster than a bike without a jackshaft kit. Overall the bike is 1000% better to ride with a jackshaft kit. Imagine having a motorcycle or car without gears, it would be basically useless.
I bought them on aliexpress. The rear is custom made buy mixing two types of fenders and fastening them together with an aluminium flat bar. I will try make video's in future which give more detail.
@@MotorizedBicycle1 o well I want top of the line and I don't have the time or ability to build one I have a 3d model I made of the full bike I want to build iv had this bike in my head for years.
No i haven't. I really dont think i need more power as its fast enough for a bicycle already. Higher octane fuel would need a higher compression ratio and an advanced ignition timing in order to start seeing performance increases. Just running higher octane fuel wont do anything good, higher octane fuel actually burns slower than regular fuel.
I use the clutch to shift simply because I want to and because it will likely reduce wear on the derailleur. Even when I ride a bicycle, i don't shift while im cranking the pedals full power, i tap off a bit when I change gears.
Bike sounds good and the scenery was beautiful! Thanks for the ride 👍🏾
Thanks for the comment. Glad you enjoyed it 😊
Your motorized bicycle is very nice and I like the Jack shaft shifting system, I live in Mexico and I also have a motorized bicycle that I made myself in round 29 and I also made Jack Shaft which I like because it runs a lot and sounds like a motorcycle, I have reached speeds of up to 55 miles per hour and all the people stare at me when I pass
Man this looks like pure fun!! Amazing build😎😎🚀
Man, your bike is the best! My minds made up now. Defo doing the jackshaft thang. .
Thanks bud. You may want to email the guys at sickbikeparts.com and see what they have left in stock as they have stopped production.
You did a damn good job on the installation. the looking on I've seen yet. I see you understand how you most avoid potholes and all that stuff, because it would hard on the tires and frame. One of things I do is use my knees like shock absorbers to lessen the impact on the tires and bike frame. But yeah, good job man
100% yes I also use me legs as rear shocks 😁. Thanks for the comment
Hell with tires and frame what about the cost of prep H ??? 😂😂😂 Nah mypillow coming dawg!❤
Word to the wise. Jetting where you have driveways every 10ft, it's not an if, it is just a when, someone or something sails right out in front of you. Great build very cool,stay safe Cheers
I know you are right buddy. I do usually stick to the speed limits if that helps. And I often wonder what's the difference between a motorized bicycle and a standatd motorcycle. I ride motorcycles on the roads. The bicycle makes just as much noise and stops just as quickly. There is risk with both motorcycle bicycle and motorcycle. Even a standard bicycle without a motor is dangerous on the roads, especially here in South Africa where there are no bike lanes and other drivers are more dangerous here.
The use of a spatula id say after a good one!
Back 2k a 1970s Thunderbird ran a yielding green and pulls out un front of my right away green light,not seeing her before hand just on my turning green i blew through the stop traffic red light hitting her at 50 from 70ish but heres issue both front shocks blown back tire still had screw in its hole and i slid down on a slide to seconds controlling bike enough to hit tire to tire fronts on impact it launched me straight up and over her cars hood by 10 feet landing on Sonic Burger sidewalk on all fours like a cat limping for Edit2 weeks 😂 i thought it was my last ride on my 1990 650 nighthawk and it was too!
My dad’s cousin died exactly like that. Car backed out in front of his motorcycle, no chance to brake.
Your bike is sick bro it sounds so good
Fala mano motorizada miiiiito top
Love the bike
muito bom a bike motorizada
Прекрасно! Возникли вопросы:
1. Какой это двигатель? Это двигатель F-80 (66cc)?
2. Резонатор проектировали самостоятельно или где-то заказывали?
3. Насколько хорошо себя зарекомендовала обгонная муфта в педальном узле? Выдерживает ли все заводки двигателя?
4. Какой карбюратор используете?
5. Насколько быстро удавалось разогнаться?
6. Сколько миль накатали, и как давно эксплуатируете?
7. Насколько хорошо велосипедная трансмиссия выдерживает нагрузки?
8. Ощутима ли прибавка к мощности с использованием резонатора?
9. Насколько громко работает?
Hi. Thanks for the comment.
1. Its a pk80 motor with falcon 911 cylinder, mz65 exhaust, cnc head, dio reed intake.
2. Resonator is mz65 from USA
3. It has an ultra heavy duty freewheel bearing by the crank from sickbikeparts.com. Very strong.
4. Oko 21mm carburetor
5. Lovely acceleration. About 95km/h on a flat
6. Not sure. Maybe 3 years light use.
7. Drive train is ebike chain and sram steel cassette. Very strong. No issues.
8. Big increase in power from the exhaust.
9. It's loud. Makes a nice sound.
@@MotorizedBicycle1 Премного благодарствую за содержательный ответ! Отдельно благодарю за указание скорости в километрах. Ваша сборка богатая, по-американски дорогая. Комплектующие и характеристики впечатляют. Возникли ещё вопросы:
1. Каков расход топлива и каким бензином с каким маслом заправляете?
2. На сколько звёзд кассета заднего колеса?
3. Какую используете велосипедную цепь, и рвалась ли она у Вас из-за такой мощности?
@@Lubyagin only a pleasure. Happy to help.
1. Fuel consumption is really not good though i haven't measured yet. I use 95 unleaded and Castrol power 1 two stroke oil.
2. 10 speed cassette but i only use 9 of the sprockets. Not the smallest sprocket. I set the derailleur limits.
3. bicycle chain has never broken and it has lasted very long so far. It is an ebike chain. KMC e10. Much stronger than standard chains.
😍😍😍
Tork palheta da uma boa alimentação no motor viu
Toop
Great video and still the most legit motorized bicycle around. Hope you have been doing well greg
Hey buddy. Thanks for the comment. Hope you are also doing well. Much love brother.
Great video my man!! You need to show me your shift kit wisdom lol
I'll make more informative vids one day in future.
🤚Где втулку заднего колеса в сборе преобрести👍👍👍
faz um teste de velocidade pra ver quantos que ela chega
pop pop pop i love it
Every single one of them cars windows would have had a ,
"WANGGGH"
In em if i was driving through their setting on a "mypillow" 😂😂😂
😂
Looks so fast and super cool to ride. Does your legs get burned at all?.. and how fast is it?.
No the exhaust doesn't get very hot up there and my leg clears it well anyway. I can touch the exhaust and it doesn't burn at all.
@@MotorizedBicycle1 that’s awesome man …… be safe and super cool I will work on a 100cc soon I just recently sold a 80cc so any ideas and where do you buy the parts .
Beautiful bike! Have you had any problems with the jack shaft? I'm thinking about getting one.
I haven't had any problems at all but its a quality kit and its installed correctly, very important.
Great scenery for a while I thought it was Australia then I noticed nobody is fixing the potholes oh yeah it must be SA 😢😂
Hiw fast is it
What is price bike cycle in India❤ so nice
Is this exhaust better than the original without the cover?
quick question i was wondering what bike that is because i’ve been looking for the nice bike that has everything nice suspension nice all around tires and things that are nice and new
It's a Ritchey P29er.
damn man! your bike looks good! where can i find some parts for my bike so it looks cool too?, I'm from Mexico and its almost imposible to find parts for motorized bikes here and I'm not good neither finding them on the internet, also i want to change some things to make it more powerful, also put a suspension but i can't find any, do you have any suggestions for were i can find good parts?
Im in South Africa. Its also extremely difficult to find parts here. I had to import everything and custom fabricate various parts as well.
@@MotorizedBicycle1 damn man, well thank you anyways
Great setup. It’s really a tricky thing to get the whole system running smoothly and reliably like that. I had a shift kit on a bike for about a month and then gave up on it. I still wonder every now and then if I had taken the time to get it right, how long the derailer/cassette would last. Anyhow, really you’ve got a nice little bike there bro.
Why dont you give it a go again? A sram steel cassette and kmc ebike chain is very strong and a derailleur wouldn't take any more wear than usual. A Shimano XT or SLX derailleur with the clutch/damper system in it is working perfectly for me. The derailleur isn't under any extra stresses if it's set correctly and changes smoothly. I can jump 3 gears at a time. I just close the throttle, pull the clutch in and change gears, like a motorcycle. I don't actually need to but i just do it anyway. If I was full throttle and changing gears aggressively maybe it would be a different story. Logically something would break like that. Chains never jump off because every is set correctly and perfectly aligned and tensioned. Also have to use high quality chains. Like buy the strongest rated chain you can find. Industrial for primary drive and go for strength and not light weight on Shimano/kmc single speed and final drive. Remember high end bicycle chains are thinner materials, light weight. So be aware of that. Look for the heavy duty stuff rarther than weight savings.
that makes me wonder doe the jackshaft kit makes the bike reach higher top speed than like 32T sprocket?
No it will actually reduce output power at rear wheel due to friction losses of the extra drive chains and bearings. So top speed will be reduced a bit. Though you will have far more acceleration and rideabilty. And if you are going down hill with a smaller final drive gear then you will be faster than a bike without a jackshaft kit. Overall the bike is 1000% better to ride with a jackshaft kit. Imagine having a motorcycle or car without gears, it would be basically useless.
Are you on cassette or freewheel hub?
10 speed sram steel cassette and a kmc ebike chain. Super strong.
4:48 mullet/ starfish break from the jackhammering 😂 edit now ik what jackshafting means edit
😎👍🏻
What are those fenders? Where can i get some
I bought them on aliexpress. The rear is custom made buy mixing two types of fenders and fastening them together with an aluminium flat bar. I will try make video's in future which give more detail.
What's the highest gear you get to?
I use 9 of the gears
@@MotorizedBicycle1 where can I have a racing engine built I mean like top of the line moneys no option? Like dlh
Im not sure as i built mine pice by piece, parts came from various suppliers and manufacturers.
@@MotorizedBicycle1 o well I want top of the line and I don't have the time or ability to build one I have a 3d model I made of the full bike I want to build iv had this bike in my head for years.
🚴💥☁☁☁☁☁ 👽👍🏻
Have you tried to run any racing fuels??
No i haven't. I really dont think i need more power as its fast enough for a bicycle already. Higher octane fuel would need a higher compression ratio and an advanced ignition timing in order to start seeing performance increases. Just running higher octane fuel wont do anything good, higher octane fuel actually burns slower than regular fuel.
Put shifter on left upside down think you have same setup
I installed it on the right because the clutch is on the left.
wait does that engine have gears??
Yes does. Its a jackshaft.
No it's using a jackshaft kit so it uses the right side gears that come on mountain bike rims
why do ppl let off throttle to shift the derailer is meant to shift with power going to it
I use the clutch to shift simply because I want to and because it will likely reduce wear on the derailleur. Even when I ride a bicycle, i don't shift while im cranking the pedals full power, i tap off a bit when I change gears.
Who knows man?
Who knows what?