Making moves .. good to see your thriving down in Florida mate.. Now after your Australian tour with the ozzy Lz I'm looking forward to you doing a barra swap early next year
A year in a half for a r154 is just long enough for me to have already sold whatever car I had intended to put it in. That things gonna be crazy manual swapped! Not having to floor it to make it slap down a couple gears to get boostin will be fun for sure.
I had the cable controlled auto with my 1jz auto Sc3 and it actually shifted great. You could control shifts simply by adjusting the cable at the throttle body.
Hell yeah so stoked that's awesome. got the car from fl and moved there and now got a manual swap from there that's hard to get. Lucky lucky I remember you manual swapping the civic same car and color I had and manual swapped mine also. I remember when you was fixing up the del sol
I’m stoked you’re still making videos , like I wouldn’t have even found Adam,jimmy, or Chris’s channel if it wasn’t for you, Keep it up and don’t stop making content !!!
If memory serves me right from looking at r154 swaps in my GS300, the soarer uses the tripod style shifter which i think is the style you have. Awesome content though, always look out for more. Muchos love from Scotland!
Nice!! I have a factory manual z30 Soarer and that is indeed the correct shifter setup. Get used to that huge throw! I actually prefer it, don't get a short shifter whatever you do. It makes it even more notchy.
I think this might be my favorite builds on RUclips it shows the real ups and downs of a build and it is one fucking sick ass car . I had a great feeling this swap was coming.
Very nice i did the same thing. That shifter is going to be slightly too long for factory shift location but mine was also factory 5 speed so you should be fine cutting hole anywhere
Mike glad to see you making them moves boii we miss you up here glad to see your doing what you love hope you can fly up for some of the shows please make more time for your vlogs .... kidzzzzz on 🔥 🔥
I put this exact box (also brand new) into my 91 Soarer a few months back, you'll have to cut the shifter hole forward of the auto hole but that's about it for cutting! The master cylinder holes are already marked and the centre hole has a grommet to remove and that's it, relatively easy! I have a little trick for fixing the ECT error on the dash after the conversion, if you need any help or have any questions just DM me on IG 😊
Also if you want the minty OEM look underneath the console, there is a trans tunnel piece you can rivet over the cut hole! I have one In my tripod r154 soarer
It's about time homie. Good grats I stop watching your videos but now I'm on it. I have a 93 mazda 626 DX switch from auto to a shifter 5 speed.. I has balls for now til I put a turbocharger on it..
Before you drop the ls400 reroute the harness under the drivers fender and also check drivers side too but you will eat harness on the drivers side and good looking out on the diff raised
sweet bro hell yea I need one for my sc300 getting Tired of auto ..can't wait to see your future content..keep it up ..good you doing great in Florida. love your soarer
I manual swapped my sc3 during covid. Warning the dm flywheel and and clutchmasters combo doesn't work. With the jzx r154 you have you will have to cut a decent amount around the shifter.
So Mike, are you planning on keeping the 1JZ? Or maybe swapping to a 2JZ while you're at it? Not that there's anything at all wrong with having a 1JZ, I'm just curious. I'm literally in the process of swapping a JDM J32A 3.2L SOHC VTEC V6 and six speed manual into my 2001 Accord sedan. It had a J30A1 3.0L SOHC VTEC V6 in it, but the 4 speed auto trans was on it's way out and it needed to go bye byes.
I'm trying to get into the video and photography scene , but idk anything about cameras what do you or you guys recommend ? My budget can be all the way to 1k
For the front I would highly recommend to shorten your front spindles or else you will have an issue where your upper control arm hits your strut tower
"My new MkIV... jk, that'ss WAY too rich for my blood" Boy, you're wearing Versace sunglasses. I have $15 Oakley knockoffs from some random Chinese brand on Amazon. Granted, that's because I'm cheap, not because I couldn't afford real Oakleys if I wanted lol.
Making moves .. good to see your thriving down in Florida mate..
Now after your Australian tour with the ozzy Lz I'm looking forward to you doing a barra swap early next year
oh Mike's got that LZ money now huh
A year in a half for a r154 is just long enough for me to have already sold whatever car I had intended to put it in. That things gonna be crazy manual swapped! Not having to floor it to make it slap down a couple gears to get boostin will be fun for sure.
I had the cable controlled auto with my 1jz auto Sc3 and it actually shifted great. You could control shifts simply by adjusting the cable at the throttle body.
Hell yeah so stoked that's awesome. got the car from fl and moved there and now got a manual swap from there that's hard to get. Lucky lucky I remember you manual swapping the civic same car and color I had and manual swapped mine also. I remember when you was fixing up the del sol
My friend in Orlando Makes cut and tilted spindles for ls400's. I ran them on my ls and loved them. He does a bunch of other stuff as well.
Mike making (shift)moves
Congrats bro, that transmission is fkng mint! The Soarer is gonna be so badass, can't wait to see after it's done!
pepperidge farm remembers when Mike said he wasn't gonna manual swap this.
Boy am I pumped that it's happening!
I’m stoked you’re still making videos , like I wouldn’t have even found Adam,jimmy, or Chris’s channel if it wasn’t for you, Keep it up and don’t stop making content !!!
Moving far away to edit for a big drift channel is rough and you are doing way better than i did with it. Hang in there dude your doing a great job.
stoked to see that big lense in action! great work on adams channel you’re killing it
Glad your manual swapping. ! I remember at Broke East last year we were talking about it and your were super hesitant! 🙏🏽🙏🏽 Glad you did it family
If memory serves me right from looking at r154 swaps in my GS300, the soarer uses the tripod style shifter which i think is the style you have. Awesome content though, always look out for more. Muchos love from Scotland!
So goood! I just picked up a brand new R154 as well for my 1.5jz e46! Cant wait for the install
Nice!! I have a factory manual z30 Soarer and that is indeed the correct shifter setup. Get used to that huge throw! I actually prefer it, don't get a short shifter whatever you do. It makes it even more notchy.
Dude I’m so stoked your on LZs channel. Just you talking about all the new camera gear, I can tell you’re stoked!
I think this might be my favorite builds on RUclips it shows the real ups and downs of a build and it is one fucking sick ass car . I had a great feeling this swap was coming.
Very nice i did the same thing. That shifter is going to be slightly too long for factory shift location but mine was also factory 5 speed so you should be fine cutting hole anywhere
I like the behind the scenes filming and gear talk. Good stuff.
I hope this finds you well, but I’m very happy for you and for where you’re at in life. I’ve been watching you since the del sol and. I’m proud ❤️
Mike glad to see you making them moves boii we miss you up here glad to see your doing what you love hope you can fly up for some of the shows please make more time for your vlogs .... kidzzzzz on 🔥 🔥
Congrats ready to see it in the soarer
Good luck on the install, hope its all you want plus some..
More than pumped, two big sweet projects incoming.
Mike that is the nicest soarer I've ever seen 🇮🇪
Sorry for bugging you about doing the swap. :p Just been ready to watch
I put this exact box (also brand new) into my 91 Soarer a few months back, you'll have to cut the shifter hole forward of the auto hole but that's about it for cutting! The master cylinder holes are already marked and the centre hole has a grommet to remove and that's it, relatively easy! I have a little trick for fixing the ECT error on the dash after the conversion, if you need any help or have any questions just DM me on IG 😊
I appreciate it!
Also if you want the minty OEM look underneath the console, there is a trans tunnel piece you can rivet over the cut hole! I have one In my tripod r154 soarer
Yea that mission u jus got is for the jzx110 still really good missions tho
@@kingswift45ify nah jzx110 shifter has no bushings, this is a 100 trans
Yo whats up bro, please keep making videos and make them more regular ! As much as i love seeing your work at adams, your own videos are 🔥
I had a ucf10 and was tucking 17’s w basic bc coils. Only hard part is drilling out a 3ich hole so the upper control arm has clearance.
It's about time homie. Good grats I stop watching your videos but now I'm on it. I have a 93 mazda 626 DX switch from auto to a shifter 5 speed.. I has balls for now til I put a turbocharger on it..
Fortune Auto gang! Such amazing coilovers definitely worth the money
Good 4 u my man!!it was time.thats what u work for.😎😎💪💪
Mike I need you to subliminally start getting the lzmfg crew into stance stuff
I applaud you for going with Broadway coils
Brand new Tri Pod R154 😍😍 I need one too for my SC!!
Dm had them for cheaper than titan
I have Broadway super lows on my miata and it's great, best stance coil and customer service ever
Before you drop the ls400 reroute the harness under the drivers fender and also check drivers side too but you will eat harness on the drivers side and good looking out on the diff raised
Knew this was coming so stoked to see it get swapped
Sweet the soarer going to be manual swapped finally.
Mike - Adams house , Adams shop
Me : it’s all yours now Mike 🤣
sweet bro hell yea I need one for my sc300 getting Tired of auto ..can't wait to see your future content..keep it up ..good you doing great in Florida. love your soarer
Dang Mike is a rebel!!...going against buying BC Coils....haha....
Yeah Dude, finally. It will be a manual swapped not factory Soarer tho😂. Keep up the good work👍
I manual swapped my sc3 during covid. Warning the dm flywheel and and clutchmasters combo doesn't work. With the jzx r154 you have you will have to cut a decent amount around the shifter.
Mike ready to be big boy static again!!!🔥
Never been so early to a upload 😂
Hell yeah, with their help it'll be manual swapped in no time
Nice one bro!
Working for lz really does pay off🎥🎥
I’ve been saving up so I can manual swap my is300 and I can’t wait
thank you so much for bringing the stance life to florida 😭
No one:
The airport: there’s levels to this shit.
So Mike, are you planning on keeping the 1JZ? Or maybe swapping to a 2JZ while you're at it? Not that there's anything at all wrong with having a 1JZ, I'm just curious. I'm literally in the process of swapping a JDM J32A 3.2L SOHC VTEC V6 and six speed manual into my 2001 Accord sedan. It had a J30A1 3.0L SOHC VTEC V6 in it, but the 4 speed auto trans was on it's way out and it needed to go bye byes.
the bearded ladies look cool in the bed of the truck @ 9:55
Mike making moves! Grant in FL???
Great content and a great car!
Cant wait to see u slam the ls400
I'm just curious how much has this build cost you? Awesome ride man.
Should bag the LS and put coils on the Soarer.
What's the song during the edit showing the trans toward the end?
Finally!! It'll be like a different car :)
I'm trying to get into the video and photography scene , but idk anything about cameras what do you or you guys recommend ? My budget can be all the way to 1k
@SlideyBois DriftTeam already got the laptop and ig I'll just look up some software for editing
I'm not sure how to ask but whats the name of the color or paint code of your soarer ? Worry if that don't make sense
Mike you should look into the rode wireless go lav mics
aye been waiting for this
Brand new OEM transmission and Clutch pedal. Fyeahspec OEM plus
plz plz tell me a sony a7s3 is in the budget asap????
I just moved back to Florida after 2.5 years, forgot how hot it was here lol
For the front I would highly recommend to shorten your front spindles or else you will have an issue where your upper control arm hits your strut tower
gabriel martinez cut spindles without extended ball joints down low and tierod spacers will FUCK the geometry up big time, bump steer gonna be insane
@@metalfruttolo9855 it's a common ls400 thing to do without getting extended ball joints and the suspension geometry will be fine
Air or coils?
Awesome News :)
Fuck yeah! What's after the manual?
I’m so jealous🤦🏽♂️🤦🏽♂️😭
Congrats
What’s the name of the song during the transmission montage
Whose is that Land Rover Defender in the background at the start of the video
110 mission nice👍
Contents fire! Quantity a little lacking ;(
Broadway static is the way to go
What happened to the Audi?
Oh wow!!
You are going to wear out the Pistons in your compressors prematurely running them sideways like that
It’s mad there’s now 3 RUclips channels running out of one shop
Turbo the ls400 and see what it does ....awesome car btw
🙏
fuuuuuuck yeah dude!
broadway staticccc bb!!!
👌🏾👌🏾👌🏾
i was gonna get those for my gti too
Should prolly wipe your mouth after eating but definitely before recording your face with your high quality camera xD
🙏🏾🙏🏾🙏🏾🙏🏾
Wait was Pat smokin a cig? Lol
"My new MkIV... jk, that'ss WAY too rich for my blood"
Boy, you're wearing Versace sunglasses. I have $15 Oakley knockoffs from some random Chinese brand on Amazon. Granted, that's because I'm cheap, not because I couldn't afford real Oakleys if I wanted lol.
I dont know why but you remind me of scott randolph (steveo)
I just made a video on my swap! If anyone needs a detailed Sc300/soarer swap tutorial it's my first vid
i got broadways on my ucf31
fortune auto coilovers but dark mode
anyone selling a clean s13 coupe not a hatch, thats running let me know i have cash cant find any listed
Hopefully mike takes his car off air and goes to coilovers
I'll watch because I'm curious. I also might keep my Soarer auto to make one of the fastest drag street Soarers.