Renault Sandero Overheating

Поделиться
HTML-код
  • Опубликовано: 12 дек 2024

Комментарии •

  • @dawiehechter5159
    @dawiehechter5159 2 года назад +2

    OHCH hope to see the video on the repair, Thanks Gary

  • @lukiemacdoshlukileni8756
    @lukiemacdoshlukileni8756 2 года назад +3

    Please make a video as your fixing the overheating problem thank you

  • @DashCamSerbia
    @DashCamSerbia 2 года назад

    Хвала!

  • @TshepoNkosi
    @TshepoNkosi Год назад +3

    Thanks I have a similar problem with Sandero 2010 Expression pack, please tell us more about compression and how to fix it

  • @DashCamSerbia
    @DashCamSerbia 2 года назад +1

    Strange. I have the same car, with the same engine (it is 1.4?). Those are durable engines, and can go hundreds of thousands of km without internal issues. The bad side of the engine is that it is weak and uses more fuel then expected for only 75 hp.

    • @vehiclemaintenanceandrepai3790
      @vehiclemaintenanceandrepai3790  2 года назад +2

      Thanks for your insights, I agree, these are great engines, but if any car is neglected it becomes crap.

  • @DashCamSerbia
    @DashCamSerbia 2 года назад +1

    BTW, on my Sandero from 2009, the headlights have a lot of small cracks (but it is still air tight) and they have faded a bit. Should I polish them, to remove the fading (and improve the light output), or will polishing maybe make the cracks even worse?

    • @vehiclemaintenanceandrepai3790
      @vehiclemaintenanceandrepai3790  2 года назад +1

      Polishing the headlights will only help to enhance the headlights, I do not think it will cause any harm.

    • @DashCamSerbia
      @DashCamSerbia 2 года назад

      @@vehiclemaintenanceandrepai3790 Thank you.

  • @Mathew-q1y
    @Mathew-q1y 25 дней назад

    Hi, I have the same problem on a 1999 Ford laser.
    I suspect a stuck Open or Closed thermostat as fan does kick in when heat starts to rise above normal.
    Could you possibly indicate where the thermostat sits, as i have so many people tell me top and bottom.
    So is it the bottom hose or the top one.

    • @vehiclemaintenanceandrepai3790
      @vehiclemaintenanceandrepai3790  24 дня назад

      A thermostat's location differs from brand to brand, model to model Ford lasers are normally at the top radiator hose, but remember Ford and Mazda had alliances when these models came out so you may have a Mazda or a Ford engine in yours.

    • @Mathew-q1y
      @Mathew-q1y 24 дня назад +1

      @@vehiclemaintenanceandrepai3790 Thank you for the information.
      I know its a B3 engine, if that helps with the location of the thermostat

  • @BevinBrand
    @BevinBrand 7 месяцев назад

    Hi Gary just wondering if you did the repair for the sandero that had a blown gasket

    • @vehiclemaintenanceandrepai3790
      @vehiclemaintenanceandrepai3790  7 месяцев назад

      I did but no video, sorry
      Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
      Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
      It is FREE.

  • @FofaBeijFeli
    @FofaBeijFeli Месяц назад

    Hi. Please advise. Is R55 thousand for a 2012 stepway reasonable? It's a private sale. 210K on the clock. Gauteng. My current car is 1999 Daewoo Lanos 1.6 with 300K on the clock, driving it about 9 years. 😂🙏🏻

    • @vehiclemaintenanceandrepai3790
      @vehiclemaintenanceandrepai3790  28 дней назад

      It does sound reasonable, but it would depend on the engine, body and interior condition, mileage and service history would also be a deciding factor.

  • @hardworker8030
    @hardworker8030 2 года назад +2

    What year is this and what mileage

    • @vehiclemaintenanceandrepai3790
      @vehiclemaintenanceandrepai3790  2 года назад +2

      2010 model with 180510 kilometres.

    • @sylvester4784
      @sylvester4784 Год назад

      ​@@vehiclemaintenanceandrepai3790mine is 2010 united. How can I take out the heater core. I bypassed the heater core because it was leaking causing steam to block the windscreen.

    • @vehiclemaintenanceandrepai3790
      @vehiclemaintenanceandrepai3790  Год назад +1

      The Dashboard needs to be dismantled to reach the heater core, it is not an easy task.

  • @thaboramoganyaka2648
    @thaboramoganyaka2648 Год назад +1

    How can I remove the manifold

    • @vehiclemaintenanceandrepai3790
      @vehiclemaintenanceandrepai3790  Год назад

      Which manifold, the intake or exhaust, both have a multitude of bolts that needs to be loosened so it could be removed.

  • @Couzin_t
    @Couzin_t 2 месяца назад

    Same overheating problem but it doesn't overheat as fast
    The fan doesn't kick in. Could it be the same problem?

    • @vehiclemaintenanceandrepai3790
      @vehiclemaintenanceandrepai3790  2 месяца назад

      Possibly, it could also be a sticking thermostat, also you have to pressure test the cooling system for leaks.

  • @lastofadyingbreed5526
    @lastofadyingbreed5526 4 дня назад

    Mine overheats now but only after driving fast, fan kicks in though and it cools. If i drive long distance its terrible

    • @vehiclemaintenanceandrepai3790
      @vehiclemaintenanceandrepai3790  3 дня назад +1

      It sounds like the water pump has to be replaced, also the radiator has to be dismantled and the core thoroughly cleaned by a radiator repair firm like Silverton.

    • @lastofadyingbreed5526
      @lastofadyingbreed5526 3 дня назад

      @vehiclemaintenanceandrepai3790 thank you for the reply
      I'll get that checked

    • @lastofadyingbreed5526
      @lastofadyingbreed5526 3 дня назад

      Are you from around Epping?
      Maybe you could be my mechanic😅
      I wanna do a timing belt change early next year

    • @vehiclemaintenanceandrepai3790
      @vehiclemaintenanceandrepai3790  День назад

      I am in the Diep River area

  • @Krotov
    @Krotov Год назад

    the oil must be in the overlfow bottle

  • @atifhussain6111
    @atifhussain6111 6 месяцев назад

    Same problem

  • @atifhussain6111
    @atifhussain6111 6 месяцев назад

    How to replace

    • @vehiclemaintenanceandrepai3790
      @vehiclemaintenanceandrepai3790  6 месяцев назад

      Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
      Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
      It is FREE.

  • @josephmandla1288
    @josephmandla1288 2 года назад +1

    Good day,
    I have a 2014 Renault Sandero 0.9 turbo.
    I found that the overflow bottle has a mixture of oil and water inside also it was boiling and that the mixture was sipping out of the bottle. I checked the dip stick and engine oil cap which had no signs of mixing.
    What could be the problem in this case?